Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Performance Technologies

Performance Technologies RTM4810

SATA Rear Panel Transition Module

Internal SATA or IDE hard drive options

 
Performance Technologies RTM4810
  
  • Rear panel interfaces:
    • VGA
    • Serial port
    • USB
    • SATA interface with four channels
  • Rear panel hot-swap LED
  • Internal SATA or IDE hard drive options
  • Internal CompactFlash® Interface



Datasheet/Manual:

Performance Technologies RTM4810 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

This single-slot, 6U board provides rear panel access to the I/O functions and SATA connectivity for the CPC5564 single board computer, the CPC5900 storage blade and the CPC5910 storage expansion blade. The RTM4810 easily snaps into the rear panel slot of a CompactPCI® system, such as Performance Technologies' Advanced Managed Platforms™.

The CPC5564 or the CPC5900 can expand storage capacity by connecting to the CPC5910 storage expansion blade. This is accomplished by connecting a SATA interface cable between two RTM4810 RTMs supporting each front board.

The RTM4810 routes all cabling out of the back of a system and provides access to a serial port, USB and SATA interface. It allows for system trouble shooting and servicing without disruption of the storage board processor, thereby enhancing the reliability and availability of the system, particularly while running diagnostics or conducting maintenance.

Hard Drive Options

Three loading options are available for the RTM4810:

  1. No hard drive
  2. One 40GB SATA hard drive
  3. One 40GB IDE hard drive

Input/Output

The RTM4810 provides a RS-232 serial port connector. Rear panel access is provided to the VGA video and USB signals on the host SBC.

Internal Interfaces

Four SATA channels are routed from the host board to the rear panel, allowing a maximum expansion configuration of one SATA drive on the RTM4810 for the host board and two SATA drives on the CPC5910 storage expansion blade. The four SATA channels also support connectivity to an external RAID storage solution.

An internal IDE channel supports an optional onboard IDE hard drive and an IDE header for external devices (such as a CD-ROM drive) or one IDE device when a Type I/II CompactFlash® expansion card is installed. Power for the IDE device can be drawn from an onboard power connector at J8 when supplemental power is supplied to power connector J9. The hot-swap LED receives information from the baseboard management controller (BMC) on the single board computer, indicating when it is safe to remove the rear panel board.

CompactFlash is selectable as a master or slave using an onboard switch. A floppy drive connector and four-pin floppy power connector (J8) for external media are available on the internal portion of the board.

 

Specification
Power Req:

Supply Voltage 5.00V / 2A
Supply Voltage 3.3V / 200mA
12VDT in on J8 / 6A

Mechanical:

Measures: 9.2" x 3.2" ( 233.35 mm x 80 mm)
Width: 0.8" (1 slot - 4HP)
Weight: 202 grams (7.13 oz)
Connector: IEC-1076-4-101 (J5)
Environmental:

Operating temperature: 0° to +55° C
Storage temperature: -40° to +85° C
Relative humidity: < 95% at 40° C, non- condensing
Peripherals and I/O Interfaces:

I/O Interface
COM1 Serial Port: RJ-11
VGA: 15-pin D-shell
USB2: 4-pin USB, Type A
SATA interface: 4-port SATA connector

Internal I/O Interface
SATA Drive: 2/5" SATA drive connector
CompactFlash interface: Type I/II expansion cards
IDE Drive interface: 2.5" IDE drive connector
IDE Channel 1 interface: 40-pin Ultra DMA/33

Regulatory Compliance

CE Certification
The RTM4810 SATA Rear Panel Transition Board meets intent of Directive 89/336/EEC for Electromagnetic Compatibility and Low-Voltage Directive 73/23/EEC for Product Safety. Compliance was demonstrated to the following specifications as listed in the Official Journal of the European Communities:

Safety
UL/cUL 60950 Safety for Information Technology Equipment
EN/IEC 60950 Safety for Information Technology Equipment
CB Report Scheme CB Certificate and Report

Emissions Test Regulations
FCC Part 15, Subpart B
EN 55022
CISPR 22
Bellcore GR-1089

EN 50081-1 Emissions
GR-1089-CORE Sections 2 and 3 EN 55022 Class A Radiated EN 55022 Power Line Conducted Emissions EN 61000-3-2 Power Line Harmonic Emissions EN 61000-3-3 Power line Fluctuation and Flicker

EN 55024 Immunity
GR-1089-CORE Sections 2 and 3
EN 61000 4-2 Electro-static Discharge (ESD)
EN 61000 4-3 Radiated Susceptibility
EN 61000 4-4 Electrical Fast Transient Burst
EN 61000 4-5 Power Line Surge
EN 61000 4-6 Frequency Magnetic Fields
EN 61000 4-11 Voltage dips, Variations & Short Interruptions

 

The RTM4810 is compatible with the following boards:

ROHS Status:

To be confirmed


Ordering Details:
Board:

RTM4810-B1H0 SATA Storage Expansion RTM, no HDD. Requires CPC5900 or CPC5564 host board, or CPC5910 expansion blade.
RTM4810-B1H1 SATA Storage Expansion RTM, 40GB SATA HDD. Requires a CPC5900 or CPC5564 host board.
RTM4810-B1H2 SATA Storage Expansion RTM, 40GB IDE HDD. Requires a CPC5900 or CPC5564 host board.

Accessories:

ACC4810-001 12" SATA Cable - for linking to other RTM4810 in the same chassis.
ACC4810-002 40" SATA Cable - for linking to External Storage Array.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.