Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro 0701-0056 - CPCI Serial Hybrid Rackmount Enclosure, 8 Slots, 3U Cards Vertical

4U / 84 HP System, 0..+50°C

Introduction

MEN Mikro's 0701-0056 compact 4U rack-mount enclosure is a basic system that allows the configuration with both CompactPCI® Serial and CompactPCI® cards. Being a hybrid system, it offers an uncomplicated and cost-effective migration solution from parallel 3U CompactPCI® to serial CompactPCI® Serial via the CompactPCI® PlusIO standard.

The 8-slot hybrid backplane in this configuration does not need a bridge or an active logic. The four slots on the left are designed for 32-bit CompactPCI® and rear I/O on P2. The four slots on the right are reserved for CompactPCI® Serial. The CompactPCI® PlusIO system slot is the fourth slot from the left. Either a standard CompactPCI® 2.0 or a PICMG 2.30 CompactPCI® PlusIO CPU board can be used in this slot.

This hybrid system is designed for use with the MEN system-slot SBCs F11S, F12N, F14, F15, F17, F18, F19P, F21P, F22P and F50P. Only F19P, F21P, F22P and F50P support CompactPCI® Serial.

That way, the three remaining slots on the CompactPCI® bus and the four CompactPCI® Serial slots can be used to install additonal I/O functions.

While the CompactPCI® Serial slots on the right are best suited for functions like Gigabit Ethernet, 10 Gigabit Ethernet or high end graphic with high data rate requirements, the parallel CompactPCI® bus delivers enough performance for all kinds of conventional I/O like binary or analog signals.

In addition, the system offers space for mass storage devices.

A 8HP plug-in 250W power supply unit which is accessible at the back of the system is already included and wired.

The enclosure meets EMC requirements, making it a perfect choice for embedded applications in harsh environments.

Ask us for completely configured, wired and tested systems!

Specification

Enclosure Specifications

GeneralCompliance with IEC 60 297-3, IEEE 1101.10
Capacity8 slots for 3U Eurocard boards (4 CompactPCI® Serial slots)
Mechanical19" rack-mount standard
3U card vertical
Dimensions: 3U, 84HP, 278mm depth
Weight: tbd.
Backplane8-slot
• CompactPCI® PlusIO system slot on the fourth slot from the left
• Three CompactPCI® peripheral slots
• Four CompactPCI® Serial peripheral slots
PSUPlug-in power supply
• 3U/8HP
• 250W
• 90V..264V AC wide range
• 3.3 V/40A, 5 V/40A, 12V/5.5A, -12 V/2A
• 3U power backplane with P47 receptacle
• 3U power input module with IEC input, fuse holder, line filter and power switch
Power connector and power-on switch at the back
CoolingTwo vertical fans (in 1U fan tray)
• 12V
• Air flow volume 140 m³/h (manufacturer's data)
• Dimensions 119 x 119 x 32 mm
• Sound pressure level 39 dB(A)

General

ExpansionCompliance with CompactPCI® Spec. 2.0 Rev. 2.1
ElectricalInput: 90V..264V AC wide range
Comsumption depends on configuration
Mechanical3U, 84HP, 278mm depth
SoftwareN/A
TemperatureTemperature range (operation):
• 0..+50°C


Temperature range (storage):
• -40..+85°C
• Power supply: -20..+65°C without derating
HumidityRelative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Weighttba
Vibration(sinusoidal): 2g/10..150Hz
Shock15g/11ms
EMCTested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Warranty2 Years
RoHSCompliant

Ordering Details

Board0701-0054
CompactPCI® rack for 3U cards in CCA frames, 3 slots, incl. wide-range PSU 24VDC, -40..+70°C(+85°C) qualified (Tx), IP65
Accessories0500-0131
Spare part, four mating connectors for 0701-0054, according to MIL D38999, -40..+85°C