Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec AIO-121602AL-PCI -12-bits Analog I/O Board (Low Gain) for PCI

16 12-Bit Analog Inputs, 2 12-Bit Analog Outputs, 8 Digital I/O and 1 Counter

Introduction

Contec's AIO-121602AL-PCI is a PCI-bus compatible multifunction board equipped with analog input x 16ch, analog output x 2ch, digital input/output (unisolated TTL level x 4 each) and a counter (32-bit, TTL level x 1ch). It offers various input setting ranges, ensuring high precision measurement.

This product can perform sampling at various different timings based on the multiple trigger condition, clock condition.

The board has a full driver library (API-PAC(W32)), which supports Visual C# .Net, Visual Basic .Net, Visual C++. Also, the product supports no-programing data collection with a data logger soft (C-LOGGER), and supports MATLAB and LabVIEW with plug in of an exclusive library (free download).

Features

  • This product is a Multiple function board equipped with analog input 16ch, analog output 2ch, digital TTL Level I/O 4ch for each, TTL Level counter 1ch.
  • Detailed measurement can be performed by multiple range setup in accordance with measuring object Bipolar / unipolar range setup for each channel can be performed by software.
  • This product has buffer memory (1K data each for analog input and output) which can be used in either FIFO or ring format.
  • Sampling can be started and stopped by software or by an external trigger (timing controlled by an externally input control signal).

Specification

Analog Inputs

Number Of Outputs16 single ended inputs
Resolution12 bit (1/4096 of full scale)
RangeBipolar: ±10V, ±5V, ±2.5V, ±1.25V or
Unipolar: 0 - 10V, 0 - 5V, 0 - 2.5V, 0 - 1.25V
Max Sample Rate100k samples per second
Maximum Input Voltage±20V
Input Impedance1M Ohm
Nonlinearity±2LSB (When using the input range ±10V, ±5V, 0 - 10V, 0 - 5V)
±3LSB (When using the input range ±2.5V, 0 - 2.5V)
±5LSB (When using the input range ±1.25V, 0 - 1.25V)
Conversion Rate10 microsec/ch
OtherBuffer memory: 1K data
Conversion start trigger: Software / external trigger
Conversion stop trigger: Number of sampling times / external trigger/software
External start signal:
• TTL level (Rising or falling edge can be selected by software)
• Digital filter (1 microsecond can be selected by software)
External stop signal
• TTL level (Rising or falling edge can be selected by software)
• Digital filter (1 microsecond can be selected by software)
External clock signal: TTL level (Rising or falling edge can be selected by software)

Analog Outputs

Number Of Outputs2 analog output channels
Resolution12 bit (1/4096 of full scale)
Current±3mA
RangeBipolar ±10V
Nonlinearity±1LSB
Other10 microsecond conversion speed
Conversion start trigger: Software / external trigger
Conversion stop trigger: Number of sampling times / external trigger/software
External start signal:
• TTL level (Rising or falling edge can be selected by software)
• Digital filter (1 microsecond can be selected by software)
External stop signal
• TTL level (Rising or falling edge can be selected by software)
• Digital filter (1 microsecond can be selected by software)
External clock signal: TTL level (Rising or falling edge can be selected by software)

Digital I/O/Counter/Timers

I/OsNumber of input channels: 4 TTL levels (positive logic)
Number of output channels: 4 TTL levels (positive logic)
OtherCounter:
Number of channels: 1ch
Counting system: Up count
Max. count: FFFFFFFFh (Binary data,32bit)
Number of external inputs: 2 TTL levels (Gate/Up)/ch, Gate (High level), Up (Rising edge)
Number of external outputs: TTL Count match output (positive logic, pulse output)
Response frequency: 10MHz (Max.)

General

Expansion32-bit, 33MHz, Universal key shapes supported (5V card only)
Electrical5VDC 600mA (Max)
MechanicalConnector:
• CN1 37 pin D-SUB connector [F (female) type] DCLC-J37SAF-20L9E [mfd by JAE] or equivalent to it
• CN2 30-pin Pin-header PS-30PE-D4TIPNI [mfd. by JAE] or equivalent to it
Board dimensions: 176.41(L) x 105.68(H) mm
TemperatureTemperature range (operation): 0 to +50°C
Humidity10 - 90%RH (No condensation)
Weight150g
Warranty1 Year
RoHSCompliant

Ordering Details

BoardAIO-121602AL-PCI 12-bits Analog I/O Board (Low Gain) for PCI
AccessoriesRefer to datasheet