Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec PI-32L(PCI)H - 32 Line Optocoupler Isolated Digital Input Module for PCI Bus

32 Channels of Optocoupler Isolated 12 - 24VDC Level Digital Inputs

Introduction

Contec's PI-32L(PCI)H is a PCI bus-compliant interface board that extends the digital signal Input functions of a PC. PI-32L(PCI)H is a 12 - 24VDC optocoupler isolated type with input 32ch. You can use all of the input signals as interrupt inputs. In addition, digital filter function to prevent wrong recognition of input signals is provided. Windows/Linux driver is bundled with this product. LabVIEW is supported with a plug-in of dedicated libraries.

  • Opto-coupler isolated input (supporting current sink output) and optocoupler isolated open-collector output (current sink type) - PI-32L(PCI)H has the optocoupler isolated input 32ch (supporting current sink output) whose response speed is 200microsec. Common terminal provided per 16ch, capable of supporting a different external power supply Supporting driver voltages of 12 - 24 VDC for I/O
  • Opto-coupler bus isolation - As the PCI bus (PC) is isolated from the input and output interfaces by optocouplers, this product has excellent noise performance.
  • You can use all of the input signals as interrupt events - You can use all of the input signals as interrupt events and also disable or enable the interrupt in bit units and select the interrupt edge.
  • Windows/Linux compatible driver libraries are attached - Using the attached driver library API-PAC(W32) makes it possible to create applications for Windows/Linux. In addition, a diagnostic program by which the operations of hardware can be checked is provided.
  • This product has a digital filter to prevent input signals from carrying noise or a chattering - This product has a digital filter to prevent input signals from carrying noise or a chattering. All input terminals can be added a digital filter, and the setting can be performed by software.
  • Output circuits include Zener diodes for surge voltage protection and over current protection circuit - Zener diodes are connected to the output circuits to protect against surge voltages. Similarly, overcurrent protection circuits are fitted to each group of 8ch outputs.
  • LabVIEW is supported by a plug-in of dedicated library VI-DAQ - Using the dedicated library VI-DAQ makes it possible to create each application for LabVIEW.

Specification

Digital I/O/Counter/Timers

I/Os32 input channels (all available for interrupts, 1 common in 16 channels)
InputsOptocoupler isolated input (Compatible with current sink output, negative logic)
Input resistance: 4.7k ohms
Input ON current: 2.0mA or more
Input OFF current: 0.16mA or less
Interrupt: 32 interrupt input signals are arranged into a single output of interrupt signal INTA
Response time: Within 200microseconds
IsolationIsolated Power 1000Vrms
Connectors(s)Connector: 37 pin D-SUB connector [F (female) type] DCLC-J37SAF-20L9E [mfd. by JAE] equivalent to it
OtherAllowable distance of signal extension: Approx. 50m (depending on wiring environment)
I/O address: Any 32-byte boundary
Interruption level: 1 level use
Max. board count for connection: 16 boards including the master board

General

Expansion32 bit, 33MHz, Universal key shapes supported (requires 5V)
ElectricalPower consumption: 5V DC 200mA
External circuit power supply: 12 - 24VDC (±10%)
MechanicalConnector: 37 pin D-SUB connector [F (female) type] DCLC-J37SAF-20L9E [mfd. by JAE] equivalent to it
Size: 121.69(L) x 105.68(H) mm
SoftwareWindows: Win32 API (Visual C# .Net, Visual Basic .Net, Visual C++ .Net examples), 32 or 64 bit architecture
OS Support:
• Windows 2000 (32 bit only)
• Windows XP, Vista, Server 2008, 7, 8, 8.1 (all 32 and 64 bit)
Data acquisition VI library for LabVIEW (VI-DAQ)
TemperatureTemperature range (operation): 0 to +50°C
Humidity10 - 90%RH (No condensation)
Weight130g
Safety/CertificationCE,VCCI
Warranty1 Year
RoHSCompliant

Ordering Details

BoardLRBB28
PI-32L(PCI)H 32 Line Optocoupler Isolated Digital Input Module for PCI Bus
AccessoriesCN5-D37M 37pin D-SUB (Female) Connector Five-piece Set
EPD-37 Screw Terminal (M3.5 x 37)
EPD-37A Screw Terminal (M3 x 37)
PCA37P-1.5 37pin D-type(M) to Open-Ended, Flat Cable(1.5m)
PCA37P-3 37pin D-type(M) to Open-Ended, Flat Cable(3m)
PCA37P-5 37pin D-type(M) to Open-Ended, Flat Cable(5m)
PCA37PS-0.5P A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m)
PCA37PS-1.5P A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m)
PCA37PS-3P A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m)
PCA37PS-5P A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m)
PCB37P-1.5 37pin D-type(M) at Each End, Flat Cable(1.5m)
PCB37P-3 37pin D-type(M) at Each End, Flat Cable(3m)
PCB37PS-0.5P 37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost
PCB37PS-1.5P 37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost
PCB37PS-3P 37pin D-type(M) at Each End, Shield Cable(3m) Low Cost
PCB37PS-5P 37pin D-type(M) at Each End, Shield Cable(5m) Low Cost