Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec AIO-121601UE3-PE - 16 Channel 12-bit Analog Input/Output Board for PCI Express

16 12-Bit Analog Inputs, 1 12-Bit Analog Output, 4 Digital I/O Channels, 1000 KSPS

Introduction

Contec's AIO-121601UE3-PE is an unisolated PCI Express bus-compliant interface board that expands the I/O function of a PC for analog signals. This product carries high-capacity buffer memory for 16MB of data for analog input, allowing background sampling to be performed in a variety of trigger conditions. This product also has one analog output channel, four channels for TTL level digital input, and four channels for TTL level digital output. Analog input region is 12bit and conversion speed 1?sec/ch. Using specially designed accessories allows you to expand functions such as additional channels, simultaneous sampling and isolation amplifier. It is bundled with full-fledged software [C-LOGGER]. The product can also be used as a data recording device for MATLAB and LabVIEW, using dedicated libraries as plug-ins.

Features

  • This product is the high-speed type that performs A-D conversion at a conversion speed of 1?sec/ch and a resolution of 12-bit. The product has analog input 16ch, analog output 1ch, digital input/output (TTL level: four each), and a counter (32-bit, TTL level 1ch). In addition, the analog input can be set to single-end input 16ch or differential input 8ch, while the counter is commonly used as the digital input/output.
  • The analog input block contains mass-storage buffer memory (16M data) that can be used in the FIFO or RING format. This allows for background analog input that does not depend on the operation status of the software or PC.
  • A number of accessories are available to expand the functions even further: a buffer amplifier, simultaneous sampling, isolation and current/thermocouple input, a low-pass filter, additional channels (+ 16ch), cables, etc.
  • Using the bundled data logger software [C-LOGGER] allows you to display recorded signal data in graphs, perform zoom measurement, save files, and perform dynamic transfer of data to the spreadsheet software [Excel] without any special program. In addition, the product is bundled with the driver library API-PAC(W32) which can be used to create various Windows/Linux applications as well as a diagnostic program which can be used to check the hardware operation.
  • You can select from software, comparison of conversion data or an external trigger (timing of an externally input control signal) to control the start of sampling. you can select from completion of sampling for a specified number of sessions, comparison of conversion data, an external trigger or software to control the end of sampling. The sampling cycle can be selected from the internal clock (high-precision timer mounted on the board) or an external clock (externally input control signal).

Specification

Analog Inputs

Number Of Outputs16 single-ended inputs or 8 differential inputs (set by jumper)
Resolution12 bits (1/4096 of full scale)
RangeBipolar ±10V, ±5V, ±2.5V or Unipolar 0 - +5V, 0 - +10V (Jumper setup)
Max Sample Rate1,000,000 samples/sec.max
Maximum Input VoltageAbsolute max. input voltage ±15V
Input Impedance1M Ohm or more
Nonlinearity±3LSB
Conversion Rate1 microsec/ch (Max.)
OtherBuffer memory: 16M data FIFO or 16M data RING (Software setup)
Conversion start trigger: Software/Input data comparison/TTL level external signal
Conversion stop trigger: Specified sampling data stored /Input data comparison/TTL level external signal/Software

Analog Outputs

Number Of Outputs1 analog output
Resolution12 bits (1/4096 of full scale)
Current±5mA
RangeBipolar ±10V / Bipolar ±5V / Unipolar 0 - +10V (Jumper setup)
Nonlinearity±1/2LSB
OtherOutput impedance: 1 Ohm or less
Conversion speed: 6 microsec/ch (Max.)

Digital I/O/Counter/Timers

I/OsNumber of input channels: Un-Isolated input 4ch (TTL, Selection of a counter output is possible at a jumper.)
Number of output channels: Un-Isolated output 4ch (TTL, A counter control input and common use are possible at a jumper.)
Counter/Timer(s)Counter device: i8254 equivalent
Counter clock: Internal (4MHz) or External signal

General

ExpansionPCI Express Base Specification Rev. 1.0a, x1 card
Electrical+3.3V 1200 mA (Max.)
MechanicalCN1: 37 pin D-SUB connector [F (female) type] Screw lock #4-40UNC DCLC-J37SAF-20L9E [mfd. by JAE] equivalent to it
CN2: 16-pin Pin-header PS-16SEN-D4P1-1C [mfd. by JAE] equivalent to it
Board dimensions: 169.33 mm x 110.18 mm
SoftwareWindows: Win32 API (Visual C# .Net, Visual Basic .Net, Visual C++ .Net examples), 32 or 64 bit architecture
Linux API (GCC)
Data Logger Software
Data acquisition VI library for LabVIEW (VI-DAQ)
Data Acquisition library for MATLAB (ML-DAQ)
TemperatureTemperature range (operation): 0 to +50°C
Humidity10 - 90%RH (No condensation)
Weight160g
Warranty1 Year
RoHSCompliant

Ordering Details

BoardAIO-121601UE3-PE 16 channel 12-bit Analog I/O Board for PCI Express, 1000KSPS
AccessoriesRefer to datasheet