Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec DIO-1616RY-PE - High Voltage Non Polarity Isolated Digital I/O Board for PCI Express

16 Optoisolated Inputs, 16 Semiconductor Relay Outputs

Introduction

Contec's DIO-1616RY-PE is a PCI Express bus-compliant interface board used to provide a digital signal I/O function on a PC. DIO-1616RY-PE is compatible with the digital signal I/O with high voltage (input 12 - 48VDC, output 120VAC/DC) and features 16 optocoupler isolated inputs (compatible with current sink output/current source output) and 16 semiconductor-relay outputs. You can use 16 input signals as interrupt inputs. The board is equipped with a digital filter function and has an output transistor protection circuit (surge voltage protection and over current protection). A Windows/Linux driver is bundled with this product. LabVIEW is supported with a plug-in of dedicated libraries.

  • DIO-1616RY-PE has the 16 of optocoupler isolated input (compatible with current sink output/current source output) whose response speed is 200?sec and 16 of semiconductor-relay output whose response speed is 1.0msec. Supporting driver voltages of 12 - 48VDC for input and 120VAC/DC for output with high voltage
  • As the PCI Express bus (PC) is isolated from the input and output interfaces by optocouplers, this product has excellent noise immunity.
  • You can use all of the input signals as interrupt events and also disable or enable the interrupt in bit units and select the interrupt edge.
  • Using the attached driver library API-PAC(W32) makes it possible to create applications for Windows/Linux. In addition, a diagnostic program by which the operations of hardware can be checked is provided.
  • This product has a digital filter to prevent input signals from carrying noise or a chattering. All input terminals can be added a digital filter, and the setting can be performed by software.
  • Using the dedicated library VI-DAQ makes it possible to create each application for LabVIEW

Specification

Digital I/O/Counter/Timers

I/Os16 input channels (1 common in 16 channels)
16 output channels (1 common in 16 channels)
InputsOpto-isolated input (Both of current sink and source outputs supported)
Input resistance: 3 kOhms (with 12 - 24 V selected) or 6 kOhms (with 24 - 48 V selected)
Input ON current: 3.1mA or more
Input OFF current: 1.0mA or less
External circuit power supply: 12 - 24 VDC (±10%) or 24 - 48 VDC (±10%) (selected by jumper
switch)
Interrupt: 16 interrupt input signals are arranged into a single output of interrupt signal INTA
Response time: Within 200 microseconds
OutputsSemiconductor relay output
Output voltage: 120VAC/DC(Max.)
Output current: 100mA (per channel, max.)
Device used: PS7221A-2A (NEC)
ON resistance: 10.0 Ohms or less
OFF leakage current: 1.0?A or less
Response time: Within 1 microseconds
IsolationIsolated Power 1000Vrms
Connectors(s)Connector: 37 pin D-SUB connector [F (female) type] DCLC-J37SAF-20L9E [mfd by JAE] or equivalent to it
OtherAllowable distance of signal extension: Approx. 50m (depending on wiring environment)
I/O address: Any 32-byte boundary
Interruption level: 1 level use
Max. board count for connection: 16 boards including the master board

General

ExpansionPCI Express Base Specification Rev. 1.0a x1
ElectricalPower consumption: 3.3VDC 550mA (Max.)
Note: External DC voltage needed to drive outputs (open collector)
MechanicalConnector: 37 pin D-SUB connector [F (female) type] DCLC-J37SAF-20L9E [mfd by JAE] or equivalent to it
Size: 169.33(L) x 110.18(H)
SoftwareWindows: Win32 API (Visual C# .Net, Visual Basic .Net, Visual C++ .Net examples), 32 or 64 bit architecture
OS Support:
• Windows 2000 (32 bit only)
• Windows XP, Vista, Server 2008, 7, 8, 8.1 (all 32 and 64 bit)
Data acquisition VI library for LabVIEW (VI-DAQ)
TemperatureTemperature range (operation): 0 to +50°C
Humidity10 - 90%RH (No condensation)
Weight120g
Safety/CertificationCE,VCCI
Warranty1 Year
RoHSCompliant

Ordering Details

BoardLRBV76
DIO-1616RY-PE Digital I/O Board with High-Voltage Isolation
AccessoriesCN5-D37M 37pin D-SUB (Female) Connector Five-piece Set
EPD-37 Screw Terminal (M3.5 x 37)
EPD-37A Screw Terminal (M3 x 37)
PCA37P-1.5 37pin D-type(M) to Open-Ended, Flat Cable(1.5m)
PCA37P-3 37pin D-type(M) to Open-Ended, Flat Cable(3m)
PCA37P-5 37pin D-type(M) to Open-Ended, Flat Cable(5m)
PCA37PS-0.5P A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m)
PCA37PS-1.5P A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m)
PCA37PS-3P A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m)
PCA37PS-5P A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m)
PCB37P-1.5 37pin D-type(M) at Each End, Flat Cable(1.5m)
PCB37P-3 37pin D-type(M) at Each End, Flat Cable(3m)
PCB37PS-0.5P 37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost
PCB37PS-1.5P 37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost
PCB37PS-3P 37pin D-type(M) at Each End, Shield Cable(3m) Low Cost
PCB37PS-5P 37pin D-type(M) at Each End, Shield Cable(5m) Low Cost