Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec AO-1616L-LPE - 16 Channel 16-bit Analog Output Board for Low Profile PCIe

16 16-Bit Analog Outputs, 8 Digital I/O Channels

Introduction

Contec's AO-1616L-LPE is a multi-function interface board of the PCI Express bus conformity that carried digital input and output (LVTTL level, for each 4 points) and counter (32bit, 1ch) as well as sixteen 16 bit analog outputs. It supports a Low Profile size slot and a standard size slot by changing an attached bracket. The board has a full driver library (API-PAC(W32)), which supports Visual C# .Net, Visual Basic .Net, Visual C++. Also, the product supports no-programing data collection with a data logger soft (C-LOGGER), and supports MATLAB and LabVIEW with plug in of an exclusive library (free download).

Features

  • Has analog output (10uSec, 16-bit, 16 channels), analog output control signal (LVTTL level 3 channels), digital I/O (each 4 channels for LVTTL level), counter (32-bit, LVTTL level 1 channel).
  • You can select from software, an external trigger to control the start of sampling. You can select from completion of sampling for a specified number of sessions, an external trigger or software to control forcibly the end of sampling. The sampling cycle can be selected from the internal clock or an external clock.
  • To adjust output voltage of all channels to 0V when the power supply is turned on can lower the unstable voltage and prevent the device connected from fault and malfunctioning when the D/A converter starts.
  • The block contains buffer memory (1K data) that can be used in the FIFO or RING format. This allows for background analog output that does not depend on the operation status of the software or PC.
  • A digital filter is included to prevent misdetection due to chattering on the control signal (external trigger input signal, sampling clock input signal, etc.), digital input signal and counter input signal(except from external clock input signal and couter gate signal).

Specification

Analog Outputs

Number Of Outputs16 output channels
Resolution16 bits (1/65,536 of full scale)
Current±3mA
RangeBipolar ±10V
Nonlinearity±5LSB
OtherOutput impedance: 1 Ohm or less
Conversion speed: 10 microsec
Buffer memory: 1k Word
Conversion start: trigger Software /external trigger
Conversion stop: trigger Number of sampling times / external trigger/software

Digital I/O/Counter/Timers

I/OsNumber of input channels: Non-isolated input 4ch (TTL level positive logic)
Number of output channels: Non-isolated output 4ch (TTL level positive logic)
InputsInput: 3.3VDC-LVTTL
OutputsOutput: 3.3VDC-LVTTL
Counter/Timer(s)Number of channels: 1ch
Counting system: Up count
Max. coun:t FFFFFFFFh (Binary data,32bit)
Number of external inputs: 2 LVTTL level (Gate/Up)/ch, Gate (High level), Up (Rising edge)
Number of external outputs: 1 LVTTL level, Count match output (positive logic, pulse output)
Response frequency: 10MHz (Max.)

General

ExpansionPCI Express Base Specification Rev. 1.0a, x1 card
Electrical3.3VDC 280mA
12VDC 380mA
MechanicalConnector: 10250-52A2JL[3M] or equivalent to it
Board dimensions: 121.69 (L) x 67.90 (H) mm
SoftwareWindows: Win32 API (Visual C# .Net, Visual Basic .Net, Visual C++ .Net examples), 32 or 64 bit architecture
Linux API (GCC)
Data Logger Software
Data acquisition VI library for LabVIEW (VI-DAQ)
Data Acquisition library for MATLAB (ML-DAQ)
TemperatureTemperature range (operation): 0 to +50°C
Humidity10 - 90%RH (No condensation)
Weight70g
Warranty1 Year
RoHSCompliant

Ordering Details

BoardAO-1616L-LPE 16 channel 16-bit Analog Ouput Board for Lwo Profile PCI Express
AccessoriesRefer to datasheet