Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Kontron Embedded Modules

Kontron DIMM-PC/KIT-3

Starter Kit for use with the DIMM-PC range

Fast assembly and quick operation
 
Kontron DIMM-PC/KIT-3 Starter Kit
  
  • Evaluation board with 3 slots
  • One PC/104 slot
  • One ISA slot
  • All signals brought to connectors
  • Ready-to-go board
  • Postcode onboard
  • Schematics available



Datasheet/Manual:

DIMM-PC/KIT-3 datasheet in PDF format Datasheet in PDF format
Kontron DIMM-PC/KIT-3 manual in PDF format Manual in PDF format
 

Introduction

The DIMM-PC/KIT3 is a Starter Kit for a DIMM-PC-System (e.g. DIMM-PC/386 or /486). It contains an evaluation board with three SO-DIMM-sockets. PC/104 slot, ISA slot and POST counter. All necessary assembling parts such as connectors, adapters, cabling and documentation will be delivered together to ensure a fast putting into operation. The only external standard components necessary are a DIMM-PC CPU, VGA monitor, AT keyboard, boot device and +5V power supply.

With Kontron You stay ... always a Jump ahead!

Schematics

Schematics for this board (so you can base your design on it) are available in PDF & Protel format.
 
 

Specification
Board:

Evaluation board for DIMM-PC®
Connectors:

Three SO-DIMM sockets (one CPU, two I/O)
PC/104 interface
Keyboard header (DIN 41524)
Ethernet 10BaseT (RJ45)
IDE connector (2,54 mm/ 40 pin)
FDD connector (2,54 mm/ 34 pin)
Header for DOT-Matrix-Display
Piezo speaker
Reset button
Header for JIPA display cables 72 pin SO-DIMM
LPT-Port
VGA-Port (15pin) for CRT
Power Connectors: HDD 4pin and Screw-Terminal 3 pin
Four serial Ports: 3x RS232 and 1x RS485

Size:

256 x 180 mm (11.6"x8.2")
Environment:

Temperature operation: 0° to 60°C, storage: -10° to 85°C
Humidity operation: 10% to 90%, storage: 5% to 95% (non condensing)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

08005-0000-00-5 DIMM-PC/KIT3 Starter Kit for DIMM-PC evaluation-board
08005-0000-00-4 DIMM-PC/ADA3 Evaluation-board for DIMM-PC

Starter kit contains:

  • DIMM-PC/VGA2
  • DIMM-PC/ADA3 Evaluation-board
  • IDE Cable
  • Floppy Cable
  • Floppy disk drive

Note: The starter kit does not contain a DIMM-PC CPU module.

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories:

SPCDIMM Socket for DIMM-PC-PC/CPU, 144pin
SIODIMM Socket for DIMM-PC-I/O, 144pin

96047-0000-00-0 JRC1 Remote Control Software with serial cable
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.