Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro MM2 - ESMini COM with Intel® Atom™ Z510/Z530

Up to 1.6 GHz CPU, up to 1GB DDR2 SDRAM

Introduction

The MM1 is an ultra-small Computer-On-Module of the rugged ESMini family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments.

The MM1 is controlled by the Intel® Atom™ processor, a first generation IA-32 core based on 45nm process technology. Due to the new power architecture of the Intel® Atom™ CPU, the MM1 has a total power consumption of max. 5 to 10 W, while having a clock frequency of up to 1.6 GHz.

The MM1 accommodates up to 1 GB of directly soldered main memory and supports other memory like USB Flash on the carrier board.

The MM1 offers a multitude of I/O: besides modern serial I/O like one PCI Express® x1 link, LVDS, SDVO, high-definition audio, SATA and USB, it also provides legacy I/O (2 CAN, 2 COM, 2 Fast Ethernet, 2 I2C) and up to 120 FPGA signals.

The MM1 is completed by a board management controller for temperature and power supervision. It comes with a Phoenix® Award BIOS configurable for the final application.

The MM1 is screened for operation in a -40°C to +85°C temperature range (Tcase, -25°C to +85°C for board versions with 1 GB DRAM). As all ESMini modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. Where operation temperatures are moderate, the module may even do without the frame and cover, with a suitable low-power processor and airflow. ESMini modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. The MM1 supports a 95x55mm form factor.

For evaluation and development purposes a microATX carrier board is available.

Specification

CPU

CPU SpecIntel® Atom™ Z530 or Z510
Up to 1.6 GHz processor core frequency
400 MHz or 533 MHz system bus frequency
512 KB L2 cache integrated in Atom processor
ChipsetIntel® system controller hub US15W
MemoryUp to 1 GB DDR2 SDRAM system memory, soldered, 400/533 MHz frequency
GraphicsIntegrated in Intel® System Controller Hub US15W
Maximum resolution: 1366x768 pixels
1 SDVO port
1 LVDS port
• 112 MHz maximum pixel clock
• 18 or 24 bits pixel color depths
Available via ESMini connector
NetworkUp to two 10/100Base-T Ethernet channels
Two status LEDs per channel
Available via ESMini connector
ExpansionOne x1 link to connect legacy I/O (FPGA)
One x1 link via ESMini connector
Data rate 250 MB/s in each direction (2.5 Gbit/s per lane)
SerialTwo interfaces
RS232 or RS422/RS485
Full or half-duplex
Data rates up to 115,200 bit/s
60-byte transmit/receive buffer
Handshake lines: RTS, CTS
Available via ESMini connector
AudioHD Audio
OtherCAN: Two CAN bus channels, 2.0 A/B CAN protocol, up to 1 Mbit/s
I²C Bus: 2 channels
GPIO:
One line from board controller on ESMini connector J1
Three lines from FPGA on ESMini connector J1
Up to 19 differential pairs of receive and transmit lines on ESMini connector J2
Up to 116 single I/O lines on ESMini connector J2
CommonInput voltage supervision
Power sequencing
Board monitoring
Watchdog
Real-time clock (with Goldcap or battery backup on the carrier board)
BIOSAward BIOS

General

ElectricalSupply voltage: +5V (-3%/+5%)
Power consumption:
• 1.1 GHz Z510 model: 6.75 W typ., 7.7 W max.
• 1.6 GHz Z530 model: 7.5 W typ., 9.3 W max.
MechanicalDimensions: 95 mm x 55 mm
ESMini PCB can be mounted between a frame and a cover for conduction cooling
Conformal CoatingOn request
SoftwareWindows®
Linux
VxWorks® (on request)
QNX® (on request)
Temperature(operation): -40°C to +85°C Tcase (ESMini cover/frame) (screened) (board versions with 512 MB DDR2 SDRAM)
(operation): -25°C to +85°C Tcase (ESMini cover/frame) (screened) (board versions with 1 GB DDR2 SDRAM)
(storage): -40°C to +85°C
Humidity(operation): max. 95% non-condensing
(storage): max. 95% non-condensing
Weight130 g (with cover and frame)
Vibration1 g, 10 Hz - 150 Hz (EN 60068-2-6)
Shock15 g, 11 ms (EN 60068-2-27)
MTBF221,026 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety/CertificationPCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCEMC behavior depends on the system and housing surrounding the ESMini module. MEN has performed general, successful EMC tests for ESMini using the XC4 evaluation carrier according to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD), IEC 61000-4-3 (electromagnetic field immunity), IEC 61000-4-4 (burst), IEC 61000-4-5 (surge) and IEC 61000-4-6 (conducted disturbances)
Warranty2 Years
RoHSCompliant

Ordering Details

Board15MM01-00 Intel® Atom™ Z510, 1.1 GHz, 512MB RAM, 1 Fast Ethernet, 1 CAN, -40..+85°C Tcase screened
15MM01-01 Intel® Atom™ Z530, 1.6 GHz, 1GB RAM, 2 Fast Ethernet, 2 CAN, -25..+85°C Tcase screened

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories08XC04-00 Evaluation and development board for all ESMini modules, 0..+60°C, incl. 2 GB USB Flash Disk and SA-Adapters for 1 RS232 and 1 CAN bus
08XC06-01 Carrier board for ESMini: 1x TTY, 1x RS232, 1x DVI-I, 1x Audio I/O, 4x USB2.0, 2x Fast Ethernet, USB Flash slot, PCI Express® Mini Card socket, SIM card holder, microSD™ card socket, 8x GPIOs, -40°C..+85°C screened

Need storage - try Innodisk SSD