Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro MM2 - ESMini COM with Intel® Atom™ E600

Up to 1.6M GHz CPU, up to 2GB DDR2 SDRAM

Introduction

The MM2 is an ultra-small Computer-On-Module of the rugged ESMini family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments.

The small form factor board is controlled by an Intel® Atom™ processor from the E6xx series. This processor family offers high I/O flexibility as it uses the PCI Express® standard for the processor-to-chipset interface. The MM2 has a total power consumption of max. 5 to 7 W, while having a clock frequency of up to 1.6 GHz.

The MM2 accommodates up to 2 GB of directly soldered main memory. Different mass storage media are supported on the carrier board.

The MM2 offers a multitude of I/O: besides modern serial I/O like two PCI Express® x1 links, LVDS, SDVO, high-definition audio, SATA and USB, it also provides legacy I/O (1 CAN, 4 COM, 2 I2C).

The MM2 is completed by a board management controller for temperature and power supervision. It comes with a UEFI BIOS. The MM2 is screened for operation in a -40°C to +85°C temperature range (Tcase at the cover and frame). As all ESMini modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. Where operating temperatures are moderate, the module may even do without the frame and cover, with a suitable low-power processor and airflow.

For evaluation and development purposes a microATX carrier board is available.

Specification

CPU

CPU SpecIntel® Atom™ E600 series
Up to 1.6 GHz processor core frequency
320 or 400 MHz graphics frequency
512 KB L2 cache integrated in Atom processor
ChipsetIntel® platform controller hub EG20T
MemoryUp to 2 GB DDR2 SDRAM system memory, soldered, 800 MHz memory bus frequency
GraphicsIntegrated in Intel® Atom™ processor
One SDVO port
• 160 MHz maximum pixel clock
• Maximum resolution up to 1920x1080 @ 50Hz
• 1920x1080 @ 60Hz or 1600x1200 @ 60Hz with reduced blanking
One LVDS port
• 80 MHz maximum pixel clock
• Maximum resolution up to 1280x768 @ 60Hz
Available via ESMini connector J1
NetworkTwo 10/100/1000Base-T Ethernet channels
Two status LEDs per channel
Available via ESMini connectors J1 and J2
StorageTwo ports via ESMini connectors J1 and J2
SATA Revision 2.x support
Transfer rates up to 300 MB/s (3 Gbit/s)
ExpansionOne x1 link between processor and platform controller hub
One x1 link for Gigabit Ethernet on J1 connector
Two x1 links via ESMini connectors J1 and J2
Data rate 250 MB/s in each direction (2.5 Gbit/s per lane)
USBSix USB 2.0 host ports
• The host ports also support USB 1.1 (OHCI implementation)
One USB client port
Data rates up to 480 Mbit/s
Available via ESMini connector J1
SerialFor implementation of four RS232/RS485 interfaces on carrier board
External line drivers/receivers implemented on carrier board (e.g. via SA-Adapter)
Full or half-duplex
One interface with full handshake supports
• Receive and transmit lines, RTS, CTS, DCD, DTR, DSR and RI
• Data rates between 300 bit/s and 4 Mbit/s
Three interfaces without handshake support
• Receive and transmit lines
• Data rates between 300 bit/s and 1 Mbit/s
Available via ESMini connectors J1 and J2
AudioHD Audio
OtherCAN: One CAN bus channel, 2.0 B CAN protocol, data rates up to 1 Mbit/s
1x I2C Bus
1x SPI Bus
1x LPC Bus
GPIO: Three lines on ESMini connector J1, twelve lines on ESMini connector J2
Real-time clock (with GoldCap or battery backup on the carrier board)
CommonInput voltage supervision
Power sequencing
Board monitoring
Watchdog
BIOSInsydeH2O™ UEFI Framework

General

Electrical+5V (-3%/+5%), power consumption 7 W
MechanicalDimensions: 95 mm x 55 mm
ESMini PCB can be mounted between a frame and a cover for conduction cooling
Conformal CoatingOn request
SoftwareWindows®
Linux
VxWorks® (on request)
QNX® (on request)
Temperature(operation): -40°C to +85°C (ESMini cover/frame) (qualified or screened)
(storage): -40°C to +85°C
Humidity(operation): max. 95% non-condensing
(storage): max. 95% non-condensing
Weight130 g (with cover and frame)
Vibration1 g, 10 Hz - 150 Hz (EN 60068-2-6)
Shock15 g, 11 ms (EN 60068-2-27)
MTBF1,159,906h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety/CertificationPCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCEMC behavior depends on the system and housing surrounding the ESMini module.
Warranty2 Years
RoHSCompliant

Ordering Details

Board15MM02-03 Intel® Atom™ E680T, 1.6 GHz, 1GB DDR2 DRAM, 2 Gigabit Ethernet, 1 CAN, 4 COM, with J1 and J2, -40..+85°C with qualified components

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories08XC04-00 Evaluation and development board for all ESMini modules, 0..+60°C, incl. 2 GB USB Flash Disk and SA-Adapters for 1 RS232 and 1 CAN bus
08XC06-01 Carrier board for ESMini: 1x TTY, 1x RS232, 1x DVI-I, 1x Audio I/O, 4x USB2.0, 2x Fast Ethernet, USB Flash slot, PCI Express® Mini Card socket, SIM card holder, microSD™ card socket, 8x GPIOs, -40°C..+85°C screened

Need storage - try Innodisk SSD