Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro XM2 - ESMexpress® COM with Intel® Atom™ XL

Up to 1.66 GHz, up to 2 GB (ECC) DDR2 SDRAM

Introduction

The XM1L is a Computer-On-Module of the ESMexpress® family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments.

The XM1L is controlled by the Intel® Atom™ XL processor, an IA-32 core based on 45nm process technology which is qualified for the industrial temperature range. Due to the power architecture of the Intel® Atom™ CPU, the XM1L has a total power consumption of max. 5 to 7 Watts, while having a clock frequency of up to 1.6 GHz.

The XM1L accommodates up to 2 GB of directly soldered main memory and supports other memory like USB Flash on the carrier board.

Interfaces from the Intel® System Controller Hub US15WP are optimized using exclusively modern serial standards and are all routed from the XM1L for availability on any ESMexpress® carrier board. Depending on the version of XM1L, those interfaces include a combination of PCI Express® links, LVDS, SDVO, high-definition audio, SATA, Ethernet with wake-on-LAN functionality, and USB. Additional COM interfaces can be made available on the carrier board via USB to COM conversion.

The XM1L is completed by a board management controller for temperature and power supervision. It comes with a Phoenix® Award BIOS configurable for the final application.

The XM1L is screened or qualified for operation from -50°C to +85°C (Tcase). As all ESMexpress® modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. Where operation temperatures are moderate, the module may even do without the frame and cover, with a suitable low-power processor and airflow. ESMexpress® modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. All ESMexpress® modules support a single 95x125mm form factor.

For evaluation and development purposes an ATX carrier board is available. The ESMexpress® module can be evaluated on a COM Express® carrier board via an adapter from ESMexpress® to COM Express®.

Specification

CPU

CPU SpecIntel® Atom™ Z510P, Z530P, Z510PT or Z520PT
Up to 1.6GHz processor core frequency
400MHz or 533MHz system bus frequency
512KB L2 cache integrated in Atom processor
ChipsetIntel® system controller hub US15WP
MemoryUp to 2GB DDR2 SDRAM system memory, soldered, 400/533MHz frequency
GraphicsIntegrated in Intel® System Controller Hub US15WP
Maximum resolution: 1600x1200 pixels
1 SDVO port (not available on board version 15XM01L02)
1 LVDS port, 112MHz maximum pixel clock, 18 or 24bits pixel color depths
Available via ESMexpress® connector
NetworkOne 10/100/1000Base-T Ethernet channel via ESMexpress® connector
Ethernet controller is connected by one x1 PCIe® link
Two LED signals for LAN link, activity status and connection speed
ExpansionOne x1 link to connect local 1000Base-T Ethernet controller
One x1 link via ESMexpress® connector
Second x1 link on ESMexpress® connector instead of Ethernet
Data rate 250MB/s in each direction (2.5 Gbit/s per lane)
USBEight USB EHCI 2.0 host ports (or 7 host ports and 1 client port, adjustable by software)
Via ESMexpress® connector
Six of these ports also support USB 1.1 (UHCI implementation)
Data rates up to 480Mbit/s
AudioHD audio
Other1 GPIO line from PIC via ESMexpress® connector
Real-time clock (with GoldCap or battery backup on the carrier board)
Wake-on-LAN
SMBus interface
Input voltage supervision
Power sequencing
Board monitoring
Watchdog
Accessible via SMBus
BIOSAward BIOS

General

Electrical+12V (9..16V), power consumption 5..7W (full load)
+5V standby voltage
MechanicalDimensions: 95 mm x 125 mm (conforming to ESMexpress® specification)
ESMexpress® PCB mounted between a frame and a cover
Conformal CoatingOn request
SoftwareWindows®
Linux
VxWorks®
QNX® (on request)
Temperature(operation): -50..+85°C Tcase (ESMexpress® cover/frame) (screened with Atom Z510P and Z530P; qualified with Atom Z510PT and Z520PT)
(storage): -50° to +85°C
Humidity(operation): max. 95% non-condensing
(storage): max. 95% non-condensing
Weight224 g (incl. cover and frame)
Vibration1 g, 10 Hz - 150 Hz (EN 60068-2-6)
Shock15 g, 11 ms (EN 60068-2-27)
MTBF464,343h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety/CertificationPCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCMEN has performed general, successful EMC tests for ESMexpress® using the XC1 evaluation carrier according to:
EN 55022 (radio disturbance)
IEC 61000-4-2 (ESD)
IEC 61000-4-3 (electromagnetic field immunity)
IEC 61000-4-4 (burst)
IEC 61000-4-5 (surge)
IEC 61000-4-6 (conducted disturbances)
Warranty2 Years
RoHSCompliant

Ordering Details

Board15XM01L00 Intel® Atom™ Z530P, 1.6 GHz, 1 GB DDR2 RAM, 1 Gb Ethernet, 1x PCIe®, with cover, -50..+85°C Tcase screened
15XM01L02 Intel® Atom™ Z510P, 1.1 GHz, 512 MB DDR2 RAM, 1 Gb Ethernet, 1x PCIe®, no J2, no cover, -50..+85°C Tcase screened

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories08AE12-00 ESMexpress® module to COM Express® carrier adapter, 0..+60°C
08XC01-00 Eval/dev board for all ESMexpress® modules (coming with top cover and frame), 0..+60°C, incl. faceplate, 4 GB USB Flash Disk and USB cable type A to A
08XC02-00 Carrier board for ESMexpress® modules (Intel®), 4 GB USB Flash Disk, LVDS and DVI on board, 2 Fast Ethernet on M12, 1 SA-Adapter slot, 2 USB 2.0, PCI Express® Mini Card slot, 24V PSU (9..36VDC), -40..+85°C with qualified components

Need storage - try Innodisk SSD