Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro MM1

ESMini™ with Intel® Atom™ Z530 or Z510, up to 1.6 GHz

Up To 1 GB DDR2 SDRAM, -40°C to +85°C Screened, Conductive Cooling
 
MEN Mikro MM1
  
  • Intel® Atom™ Z530 or Z510, up to 1.6 GHz
  • Up to 1 GB soldered DDR2 SDRAM
  • 1 PCI Express®
  • Up to 2 Fast Ethernet interfaces
  • 8 USB 2.0 (1 client)
  • 2 UARTs
  • Up to 2 CAN bus interfaces
  • -40°C to +85°C screened
  • Conductive cooling



Datasheet/Manual:

MEN Mikro MM1 datasheet in PDF format MEN Mikro MM1 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The MM1 is an ultra-small Computer-On-Module of the rugged ESMini™ family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments.

The MM1 is controlled by the Intel® Atom™ processor, a first generation IA-32 core based on 45nm process technology. Due to the new power architecture of the Intel® Atom™ processor, the MM1 has a total power consumption of max. 5 to 10 Watts, while having a clock frequency of up to 1.6 GHz.

The MM1 accommodates up to 1 GB of directly soldered main memory and supports other memory like USB Flash on the carrier board.

The MM1 offers a multitude of I/O: besides modern serial I/O like one PCI Express® x1 link, LVDS, SDVO, high-definition audio, SATA and USB, it also provides legacy I/O (2 CAN, 2 COM, 2 Fast Ethernet, 2 I2C) and up to 120 FPGA signals.

The MM1 is completed by a board management controller for temperature and power supervision. It comes with a Phoenix® Award BIOS configurable for the final application.

The MM1 is screened for operation in a -40°C to +85°C conduction or convection cooled environment. As all ESMini™ modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. Where operation temperatures are moderate, the module may even do without the frame and cover, with a suitable low-power processor and airflow. ESMini™ modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. The MM1 supports a 95x55mm form factor.

For evaluation and development purposes a microATX carrier board is available.
 
 

Specification

CPU:

Intel® Atom™ Z530 or Z510
• Up to 1.6GHz processor core frequency
• 400MHz or 533MHz system bus frequency
Chipset
• Intel® system controller hub US15W

Memory:

512KB L2 cache integrated in Atom processor
Up to 1GB DDR2 SDRAM system memory
• Soldered
• 400/533MHz memory bus frequency locked to the FSB frequency

Serial ATA (SATA):

One port via ESMini™ connector
Transfer rates up to 100MB/s
Via PATA-to-SATA converter

Graphics:

Integrated in Intel® System Controller Hub US15W
Maximum resolution: 1600x1200 pixels
1 SDVO port
1 LVDS port
• 112MHz maximum pixel clock
• 18 or 24bits pixel color depths
Available via ESMini™ connector

USB:

Eight USB 2.0 host ports (or 7 host ports and 1 client port, adjustable by software)
• Via ESMini™ connector
• Six of these ports also support USB 1.1 (UHCI implementation)
EHCI implementation
Data rates up to 480Mbits/s

Ethernet:

Up to two 10/100Base-T Ethernet channels
Two status LEDs per channel
Available via ESMini™ connector

UART:

Two interfaces
RS232 or RS422/RS485
Full or half-duplex
Data rates up to 115,200 bits/s
60-byte transmit/receive buffer
Handshake lines: RTS, CTS
Available via ESMini™ connector

CAN bus:

Two CAN bus channels
2.0 A/B CAN protocol
Data rates up to 1 Mbit/s
Available via ESMini™ connector

I²C Bus:

Two interfaces
Available via ESMini™ connector

PCI Express®:

One x1 link to connect legacy I/O (FPGA)
One x1 link via ESMini™ connector
Data rate 250MB/s in each direction (2.5 Gbits/s per lane)

GPIO:

One line from PIC on ESMini™ connector J1
Three lines from FPGA on ESMini™ connector J1
Up to 19 differential pairs of receive and transmit lines on ESMini™ connector J2
Up to 116 single I/O lines on ESMini™ connector J2

Board Management Controller:

Input voltage supervision
Power sequencing
Board monitoring
Watchdog
Accessible via SMBus

Miscellaneous:

Real-time clock (with GoldCap or battery backup on the carrier board)
Wake-on-LAN
SMBus interface

HD Audio:

Via ESMini™ connector

Electrical:

Supply voltage/power consumption:
+5V (-3%/+5%), power consumption tbd

Mechanical:

Dimensions: 95mm x 55mm
ESMini™ PCB mounted between a frame and a cover
Weight: 130g (with cover and frame)

Environmental:

Temperature range (operation):
• -40 to +85°C Tcase (screened)
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms (EN 60068-2-27)
Bump: 10g/16ms (EN 60068-2-29)
Vibration (sinusoidal): 1g/10..150Hz (EN 60068-2-6)
Conformal coating on request

MTBF:

tbd @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Conforming to EN 55022 (radio disturbance), EN55024 EN 61000-4-2 (ESD) and EN55024; EN 61000-4-4 (burst)

BIOS:

Award BIOS

Software Support:

Windows® 2000/XP/Vista
Windows CE (on request)
Linux
VxWorks® (in preparation)
QNX® (on request)

ROHS Status:

This product is lead free/ROHS compliant

Ordering Details:
Board:

15MM01-00 Intel® Atom™ Z510, 1.1 GHz, 512MB RAM, 1 Fast Ethernet, 1 CAN, -40..+85°C screened
15MM01-01 Intel® Atom™ Z530, 1.6 GHz, 1GB RAM, 2 Fast Ethernet, 2 CAN, -40..+85°C screened

Please refer to datasheet for further information.
Accessories:

08XC04-00 Evaluation and development board for all ESMini™ modules, 0..+60°C, incl. 2GB USB Flash Disk and SA-Adapters™ for 1 RS232 and 1 CAN bus

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.