Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro XC4

ATX Evaluation Carrier for ESMini™

For Evaluating ESMini™ CPU Modules
 
MEN Mikro XC4
  
  • MicroATX form factor
  • 1 ESMini™ slot
  • 2 PCI Express® x1 connectors
  • 2 GB USB Flash
  • 1 SATA
  • LVDS, DVI
  • HD audio in and out
  • 5 USB 2.0 Master, 1 USB 2.0 Client
  • 2 Fast Ethernet
  • 2x CAN bus, 2x RS232 via SA-Adapters™
  • 120 FPGA signals from ESMini™



Datasheet/Manual:

MEN Mikro XC4 datasheet in PDF format MEN Mikro XC4 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The XC4 is an evaluation and development platform that can be used together with any type of ESMini™ module. It provides physical interfaces and connectors for nearly all of the modern serial standard I/Os routable from the ESMini™ connectors to the carrier board. The XC4 comes with one ESMini™ slot and two PCI Express® card slots. The functionality of all connectors depends on the ESMini™ module used on the XC4. It corresponds to the standard microATX form factor and can therefore operate in a PC system. Additional 4 GB of USB-driven Flash disk for application storage complement the memory configuration that is already available on the ESMini™ module.

For a first evaluation of the functions and performance of the ESMini™ module of choice we strongly recommend to use the XC4. Further useful accessories include an external PSU.
 
 

Specification

ESMini™
Carrier Card:

One ESMini™ slot
P1 and P2 assembled

Memory:

One SATA connector
Two 2GB USB Flash disks included in the delivery (via two USB onboard connectors)
One SDIO/MMC slot

Graphics:

One DVI rear connector
One LVDS ZIF connector
• For direct connection of an LVDS display
One LVDS backlight 10-pin connector

I/O:

Six USB 2.0 host connectors, one USB 2.0 client connector
• Only five host connectors can be used when the client connector is used

10/100Base-T Ethernet
• Two interfaces on RJ45 connectors

Audio
• Audio in
• Audio out
• SPDIF out

RS232
• Two onboard connectors
• Physical interface via SA-Adapters™
• Only one if a second PCI Express® card is plugged

CAN Bus
• Two onboard connectors
• Physical interface via SA-Adapters™
• Only one if a second PCI Express® card is plugged

GPIO
• 120 FPGA signals from ESMini™ on two 60-pin connectors

PCI Express®:

Two PCIe® x1 connectors

Miscellaneous:

Battery holder
Power on button
Reset button

Electrical:

Supply voltage/power consumption:
• ATX standard power supply via 24-pin connector and 4-pin connector
MTBF: tbd @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical:

Dimensions: 305mm x 255mm (conforming to ATX standard)
Weight: 495g (without ESMexpress® module)

Environmental:

Temperature range (operation):
• 0..+60°C (screened)
• Airflow depending on ESMini™ module
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 2,000m
Bump: 10g/16ms
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

ROHS Status:

This product is lead free/ROHS compliant

Ordering Details:
Board:

08XC04-00 Evaluation and development board for all ESMini™ modules, 0..+60°C, incl. 2GB USB Flash Disk and SA-Adapters™ for 1 RS232 and 1 CAN bus

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.