Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron ETX-CD - ETX Board with Intel® Core™ Duo Technology

1.06GHz, 1.5GHz or 1.66GHz CPU Processor Versions

Introduction

ETX-CD is a hight performing Computer On Module based on ETX 3.0 standard. The ETX-CD module is based on the Intel® Core™ Duo processor and Intel® Celeron® M processor as well as the Intel 945GM and ICH7M chipset.

ETX-CD modules will provide the following interfaces that are always located in the same physical position on each board, thus guaranteeing scalability between modules: PCI 2.3, USB 2.0, Parallel ATA, LVDS as well as an ACPI (Advanced Configuration and Power Interface) for optimised power management.

The JILI display interface technology ensures automatic setting of the video controller parameters for the attached LCD panel. The mounting holes on the board provide secure mounting to allow the module increased shock and vibration resistance.

It also takes advantage of the new ETX® 3.0 specification that allow for 2 Serial ATA ports without violating the existing ETX® 2.8 pin usage 

Specification

CPU

CPU SpecIntel® Celeron® M440 processor (1.86 GHz, 533FSB, 1MB L2)
Intel® Core™ Duo processor L2400 LV (2x 1.66 GHz (dual core), 667FSB, 2MB L2)
Intel® Core™2 Duo processor L7400 LV (2x 1.5 GHz (dual core), 667FSB, 4MB L2)
ChipsetIntel® 945GME 667/533 MHz FSB, Intel® ICH7M
MemoryUp to 2 GB DDR2 (400/533/667) SODIMM memory, one DDR2 SODIMM socket
GraphicsIntegrated with Intel® Graphics Media Accelerator (GMA950)
Dual Independent Display Support
Max CRT WUXGA/QXGA (2048x1536)
Max LCD WUXGA/UXGA (1600x1200), (JILI3/EDID support)
Network10/100 MBit Base-T-Phy, Intel® 82562VZ
Supports LAN boot
Storage2x Serial ATA® II (300MB/s), (AHCI) ports (ETX 3.0 compliant)
IDE 1x EIDE UDMA 66/100 (primary channel only)
ExpansionETX Interface
USBUSB 4x USB 2.0 (OHCI / EHCI)
Serial2x TTL Serial Ports (16550 compatible)
AudioAC 97 controller, Line In, Line Out, Mic in
OtherEnhanced Parallel Port (Shared with Floppy)
Floppy Port (Shared with LPT)
CommonIDA Support, IrDA1.1 enhanced, WakeOnLAN, Watchdog, I2C Bus, RTC
EPROM BIOS Setup, LAN Boot, JRC support, Suspend states (S0/S3/S4/S5)
Evaluation baseboard available
Remote control software available
BIOSPhoenix - Award BIOS

General

ExpansionETX Interface (version 3.0 compliant)
PCI 2.3, 32 bit / 33 MHz PCI bus
ElectricalRefer to datasheet/manual
Mechanical95 x 114mm (3.7x4.5“)
SoftwareWindows 7
WES7
Windows Vista®
Windows® XP Embedded
Windows® XP
Windows® CE 6.0
VxWorks (BSP for VxWorks 6.6 & 6.8, chargable)
Linux
DOS
TemperatureOperation (standard): 0 to 60°C
Operation (EXT version): -25 to 75°C
Storage: -30 to 85°C
HumidityOperation: 10% to 90%, storage: 5% to 95% (non condensing)
MTBF109418 hours (12.4 years) @ 40°C
Warranty2 Years
RoHSCompliant
Availability:Last time buy date: 30 September 2014

Ordering Details

UpdateAs of late October 2015, Kontron still have 20 of 18030-0000-17-2EXT ETX-CD LV 1.66GHz L2400 E1 modules in stock to clear - please contact us if of interest!
BoardAs above, this product is EOL. Please consider the ETX-LX2 as a compatible replacement.

Part numbers:
18030-0000-17-5 ETX®-CD with Intel® Core™ Duo L2400 with 945GME (2x 1.66 GHz)
18030-0000-19-4 ETX®-CD with Intel® Celeron® M440 with 945GME (1.86 GHz)
18030-0000-15-6 ETX®-CD with Intel® Core™2 Duo L7400 with 945GME (2x 1.5 GHz)
8030-0000-17-2EXT ETX®-CD with Intel® Core™ Duo L2400 with 945GME (2x 1.66 GHz), E1 temp (-25 to +75C)

The ETX-CD modules come without a heatspreader (see accessories)

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories18030-0000-99-0 HSP-ETX CD threaded stand off heatspreader
18030-0000-99-1 HSP-ETX-CD through hole stand off heatspreader
18030-0000-99-0C01 ETX CD threaded stand off heatspreader/heatsink assembly (no fan)
18030-0000-99-0C02 ETX-CD threaded stand off heatspreader/heatsink assembly (fan)

Need storage - try Innodisk SSD