Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Connect Tech Inc.

Connect Tech Inc Xtreme/FP

FeaturePak module with four RS-232 serial ports

Speeds of up to 1Mbps, 16 digital IO or timer/counter functionality
 
Connect Tech Inc Xtreme/FP RS-232 serial
  
  • Compatible with any FeaturePak host board
  • 4 Ports RS-232
  • PCI Express UART
  • 256 bytes of transmit and receive FIFO buffers
  • Automatic hardware and software flow control
  • Speeds of up to 1Mbps
  • 16 digital IO or timer/counter functionality
  • Digital IO is 5V or 3.3V selectable
  • Primary and secondary FeaturePak IO groups utilized
  • ROHS compliant



Datasheet/Manual:

Connect Tech Inc Xtreme/FP datasheet in PDF format Datasheet in PDF format
Manual to follow Manual to follow
 

Introduction

The Xtreme/FP board uses the small module form factor of the FeaturePak specification. It is designed to add four high speed serial ports to your FeaturePak compatible baseboard or single board computer. It also allows you to use 16 bits of custom configurable digital I/O to expand functionality, control and communicate to different devices. Xtreme/FP can be used for a wide range of embedded applications.

What is FeaturePak?

A new and exciting embedded system expansion standard. FeaturePak is a mezzanine-style standard designed to work with existing standards such as PC/104, SUMIT, Qseven, ETX, XTX, COM Express, etc. FeaturePak modules are smaller than a credit card at 42mm x 65mm in size and make use of a low-cost connector to integrate all host and external I/O interfaces. Using FeaturePak allows you to reconfigure your system design using off the shelf modules based on an open standard that will ensure a strong eco-system.

 
 

Specification

Number of Ports:

4

Electrical Interface:

RS-232

Control Signals:

TX, RX, RTS, CTS, DTR, DCD, DSR, RI

Connectors:

None, IO connected to FeaturePak IO Pins

Baud Rate:

1 Mbps

UART Type:

17V358 PCIe UART with up to 256 bytes of transmit and receive FIFO buff ers for each port

Dimensions:

2.550” x 1.7”

Temperature:

-40°C to +85°C

Bus:

FeaturePak

Software:

Windows/Linux/QNX

System Requirements:

Baseboard/processor module with FeaturePak socket

Power Consumption:

500mA

Additional I/O:

16 Digital IO (5V or 3.3V selectable)

Warranty and Support:

Lifetime warranty and free technical support

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

XKG001 Xtreme/FP with four RS-232 serial ports, 16 digital I/O lines

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.

Accessories:

ADG022 PCI Express to FeaturePak Adapter

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.