Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

GPS/GNSS - Embedded

This section contains our range of embedded (positional) based GPS/GNSS products from Trimble Navigation.

These devices are designed to be the GPS and GNSS positioning heart embedded in portable devices. They are created in a number of form factors to match a variety of applications and packaging requirements. Some of the embedded devices have inertial and accelerometer sensors to enable DR (dead reckoning) functions. Dead reckoning increases position availability in harsh satellite signal environments such as in urban canyons, mountainous region and mines.

Products

Trimble Aardvark DR + GPS

Trimble Aardvark DR + GPS

Dead reckoning & GPS module

Next-generation RF technology

12 channel module, 3.3V powered

NMEA or HIPPO protocols

SMT module, 2.54mm x 19mm x 19mm

Starter kit available

-40°C to +85°C temperature operation

Trimble Buffalo

Trimble Buffalo

GNSS surface mount receiver module

GPS, GLONASS & Galileo support

32 tracking channels, 3.3V powered

NMEA output & input: 2 serial ports

SMT module, 2.54mm x 19mm x 19mm

Starter kit available

-40°C to +85°C temperature operation

Trimble Condor

Trimble Condor

GPS receiver family

Multiple form factors & interface options

22 tracking channels, 3.3V powered

NMEA output & input

From 10 x 11mm to 26 x 26 mm

Starter kit available

-40°C to +85°C temperature operation

Trimble Copernicus II

Trimble Copernicus II

Low power, surface mount GPS receiver

Trimble quality at low cost

12 tracking channels, 3.3V powered

TSIP, TAIP & NMEA protocol support

19 mm x 19 mm x 2.54 mm

Starter kit available

-40°C to +85°C temperature operation

Trimble Silvana/Anapala

Trimble Silvana/Anapala

Combined GPS receiver/antenna modules

Trimble quality at low cost

Condor or Copernicus II receiver

22 pin I/O connector

35.56 mm × 35.56 mm × 8 mm

Starter kit available

-40°C to +85°C temperature operation

Trimble Zelia

Trimble Zelia

Combined GPS receiver/antenna module

Trimble quality at low cost

Condor C1011 receiver

Uses PCB edge connection

Just 19.2 mm x 36 mm

Starter kit available

-40°C to +85°C temperature operation

Naelcom Lassen iQ/SQ Clone

Naelcom Lassen iQ/SQ Clone

Lassen iQ/Lassen SQ replacement

Replace EOL parts with current technology

Avoid costly redesign

Supports TSIP, TAIP and NMEA protocols

GNSS option

-40 to +85°C temperature operation

Naelcom Lassen SKII Clone

Naelcom Lassen SKII Clone

Trimble Lassen SKII replacement

Replace EOL parts with current technology

Avoid costly redesign

Supports TSIP, TAIP and NMEA protocols

GNSS option

-40 to +85°C temperature operation

Naelcom Lassen LP Clone

Naelcom Lassen LP Clone

Trimble Lassen LP replacement

Replace EOL parts with current technology

Avoid costly redesign

Supports TSIP, TAIP and NMEA protocols

GNSS option

-40 to +85°C temperature operation