Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Trimble Navigation Limited

Trimble Hard Mount Antenna

Permanent Mount Hardmount GPS antenna

3.0V/5.0V operation, TNC connector, waterproof to 1 meter, 28dB gain
 
Trimble Hard Mount Antenna
 
  • Designed for vehicles
  • Operating temp -40° to +85°C
  • Waterproof to 1m
  • 28dB gain
  • 5.0V or 3.0V versions
  • TNC Connector
  • Proven extra rugged reliable
  • Compact and low profile



Datasheet/Manual:

Trimble antenna datasheet in PDF format Trimble Antenna Datasheet - PDF

 

Introduction

Trimble's Hardmount Antenna provides a permanent-mount antenna for Trimble's range of GPS boards. Housed in a compact, low-profile package, the Hardmount Antenna is well-suited to mobile positioning applications. The Hardmount Antenna is a miniature patch antenna with a 25 dB preamplifier. The antenna is designed for installation on vehicles with a 0.75 inch mounting hole. The antenna comes complete with gasket and mounting nut. May be installed on flat surfaces up to 0.1 inch thick.
 
 

Specification

Weight:

150g maximum

Dimensions:

64.5mm diameter, 40.5 mm height (2.48" x 1.6")
Trimble Hardmount antenna dimensions

Connector:

TNC

Mounting:

0.75 inch threaded mount

Operating Temp:

-40°C to + 85°C

Storage Temp:

-40°C to + 100°C

Humidity:

20% to 95% R.H.

Prime Power:

3.0V version: 3.0V +/- 0.5V (i.e. 2.5V to 3.5V operating range), 35mA maximum consumption
5.0V version: 4.75V +/- 0.5V (i.e. 4.25V to 5.25V operating range), 35mA maximum consumption

Waterproof:

Submersible to 1 meter
JIS D0203 S2

Shock:

50G : VERTICAL AXIS
30G : ALL AXIS

Vibration:

10 ~ 200Hz. LOG. SWEEP 3.0G
(SWEEP TIME : 15 MIN.), 3 AXIS

Anti-corosion:

BASED ON JIS Z 2371, SPRAY 5%
SALT WATER 35°C SHOULD NOT
RUST AFTER 96Hrs.

Frequency:

1,575.42 ± 1.023MHz (L1)

Impedance:

50 OHMS

Polarization:

RHCP

VSWR:

2.0 max

Oscillation:

No oscillation must be found in band and outband

Axial Ratio:

90° : 3.0 dB min. 20° : 6.0 dB min

Gain:

28dB minimum

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

70228-70 5.0V Hardmount GPS Antenna with TNC connector, 28 dB gain
70228-00 3.0V Hardmount GPS Antenna with TNC connector, 28 dB gain

70228-70 replaced the 57860-70 and 28367-70 hardmount GPS antenna
The 70228-70 is mechanically identical to these modules but has improved filtering capabilities

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.

Accessories:

D2478-3001 TNC to TNC, 1 metre using RG-58C/U cable
D2478-3008 TNC to TNC, 8 metre using RG-58C/U cable
D2478-3025 TNC to TNC, 25 metre using RG-58C/U cable

D2606-3008 TNC to N-TYPE, 8 metre using RG-58C/U cable
D2606-3025 TNC to N-TYPE, 25 metre using RG-58C/U cable

D2607-3008 TNC to BNC, 8 metre using RG-58C/U cable
D2607-3025 TNC to BNC, 25 metre using RG-58C/U cable

D2446-3000 F-Type to F-Type, 25 metres

Other cable lengths/connector combinations available on request - call for details

Order Online!

 

ORDER ONLINE - this product is available to order on our online webshop.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.