 |
Sitemap - Print Page - Email Link - |
RSS |
|
Trimble Thunderbolt EGPS Disciplined Clock for the Wireless Infrastructure12-channel GPS Receiver & High Quality Ovenized Oscillator |
 |
 Datasheet/Manual: |
|
Datasheet in PDF formatIntroductionThe Trimble® Thunderbolt® E GPS Disciplined Clock is Trimble’s latest offering for GPS synchronization devices targeting the wireless infrastructure. This fifth-generation GPS clock combines a 12-channel GPS receiver, control circuitry, and a high- quality ovenized oscillator on a single board, providing increased integrity and reliability at a lower size and cost. The Thunderbolt E's level of integration makes it a perfect solution for precise timing applications in the wireless industry Among its uses are synchronizing the E911 positioning infrastructure and maximizing bandwidth for wireless local loop. The architecture is comparable to systems currently used to maintain the tough CDMA holdover specification. This makes the Thunderbolt E GPS clock a natural for a CDMA clock, the digital standard for cellular phones. The Thunderbolt E GPS clock outputs a 10 MHz reference signal and a 1 PPS signal with an over-determined solution synchronized to GPS or UTC time The 10 MHz reference accommodates applications requiring sub-microsecond timing. The Trimble T-RAIM (Time-Receiver Autonomous Integrity Monitor) algorithm is used to monitor satellites to ensure signal integrity. Matching the Thunderbolt E GPS Clock with Trimble's Bullet ™ III antenna creates a system that provides reliable performance in hostile R/F environments The system can be easily calibrated for different cable lengths. The high level of integration and volume production techniques make the Thunderbolt E GPS Disciplined Clock an extremely cost-competitive timing solution for volume synchronization applications. Starter KitA starterkit is available for the Thunderbolt E which includes everything needed to get you going.
|
Specification |
|
| Performance: | |
| General | L1 frequency, CA/code (SPS) |
| Update rate | 1 Hz |
| Accuracy: | 1PPS Accuracy UTC ±15 nanoseconds (one sigma)
|
| Harmonic level: | -40 dBc max |
| Spurious: | -70 dBc max |
| Phase noise: | 10 Hz -120 dBc/Hz |
| Interface: | |
| Prime power: | +24V and ground using DC to DC power supply (19V-34V) |
| 1 PPS: | BNC Connector TTL levels into 50Ohm 10 microseconds-wide pulse
with the leading edge synchronised to UTC within ±15 nano-seconds
in static, time only mode. |
| 10 MHz: | BNC connector |
| Serial Interface: | RS-232 through DB-9 connector |
| RF Antenna: | BNC |
| Serial protocol: | Trimble Standard Interface Protocol (TSIP) binary protocol @ 9600, 8-Odd-1 |
| Technical: | |
| Power consumption: | 15 watts cold |
| Dimensions: | 5"L x 4"W x 2"H (127 mm x 102 mm x 40 mm)
|
| Weight: | 0 .628 lbs (0 .285 kg) |
| Operating temp: | 0°C to +60°C |
| Storage temp: | -0°C to +85°C |
| Operating humidity: | 95% non-condensing |
| Maximum altitude: | 18,000 m |
| ROHS Status: | This product is RoHS compliant. |
Accessories |
|
 |
Bullet III Antenna See here for more details |
 |
Hard Mount GPS Antenna See here for more details |
| Ordering Details: | |
| Board: | 60333-30 Thunderbolt E Unit Please note that boards are supplied with no cables, software
or manuals. |
| Accessories: | 62989-00 Thunderbolt E Starter Kit 57861-00 BULLET III 3.3V
GPS antenna TNC connector D2478-3008 TNC to TNC, 8 Metre Cable Starter kit: Thunderbolt E, TNC Bullet antenna, 75 foot cable TNC to TNC, TNC to BNC adapter, power adapter and connectors, CD with user guide & Software monitor tool |
| Further Information: | Want further information or pricing on this product? Either fill out our feedback form or contact us for further information. |
 |
ORDER ONLINE - this product and accessories are available to order on our online webshop. |
Home - About Us - Contact - Exhibitions - Feedback - News - Newsletter - Ordering - Press Releases - Products - RSS Feed - Support |
© 2010 Diamond Point International. All rights reserved. |