Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Trimble RES SMT 360 Carrier - Multi-GNSS Timing Module

Ideal Solution For Mobile Products, Precise Timing When You Need It

Introduction

Introduction

Trimble® designed the RES SMT 360™ Timing Module to work in the most demanding weak signal environments, including femtocells and in-building systems. With its robust performance in low signal environments, users can save on expensive cabling and externally mounted antennas. In addition, the RES SMT 360™ timing module accepts aiding data for environments requiring the highest levels of enhanced sensitivity.

PPS and Frequency Outputs

The RES SMT 360™ timing carrier outputs a precise1 pulse-per-second (1PPS) and an even second pulse to maximize your network performance and synchronize systems at a global level. Custom frequencies are also available for volume sale (also consider the ICM SMT 360, a similar product with 10MHz frequency output)

Standard Timing features

The RES SMT 360™ timing carrier includes many of Trimble’s standard timing features, including Time-Receiver Autonomous Integrity Monitoring (T-RAIM) algorithm, automatic self-survey, and GNSS disciplining of the oscillator to provide an accurate frequency reference.

Starter Kit

The RES SMT 360™ timing carrier can be loaded directly onto the customer’s application board. The Starter Kit provides everything you need to evaluate the RES SMT 360™ timing platform, including the RES SMT 360™ on a carrier board, AC/DC power converter, antenna and USB interface cable.

Specification

Product Specification

GeneralSupports GPS, GLONASS, Galileo, Beidou, SBAS, QZSS
Supports GNSS incl QZSS
Capable of simultaneously tracking of up to 32 GNSS satellites
Positioning SystemSPS, Timing
Update rate1Hz
Time to First Fix<46s (50%)
<50s (90%) cold start
Re-acquisition<2s (90%)
Sensitivity-148 dBm cold start
-160 dBm tracking
ConnectorsI/O: Single 8-pin (2x4) male header, 2mm pitch, 3.2mm height
Antenna: SMB right angle receptacle (jack)
InterfacesOne UART Serial Port, 3.3V LVTTL compatible
PPSCMOS-compatible, LVTTL-level pulse, once per second
1 PPS Timing Accuracy: 15 ns (1 sigma)
ProtocolsSupports TSIP and NMEA 0183 standard v4.1 protocols (TSIP is recommended for full timing diagnostic information)
Bi-directional NMEA messages
Selection stored in flash memory
NMEA MessagesSupports standard GGA, VTG, GLL, ZDA, GSA, GSV and RMC NMEA messages
Messages selectable by TSIP or NMEA command
Proprietary NMEA messages (almanac data, PPS config, port configuration etc)
Selection stored in flash memory
Pinout1. Antenna power input: 3.0V DC to 5.5V DC, 55mA max
2. Prime power input +3.3V DC ±0.3V DC
3. TXDA Port A transmit, LVTTL
4. Reserved
5. RXDA Port A receive, LVTTL
6. 1PPS One Pulse-Per-Second, LVTTL
7. Reserved
8. Ground
OtherSupports Assisted-GPS (A-GPS) operation.
Supports active antenna designs only
Starter Kit available
The RES SMT 360 multi-GNSS timing carrier is optimized for static timing applications
While it can be used in dynamic mode the stability of PPS may be degraded
Includes short circuit protection and OPEN/SHORT detection circuit

General

Electrical+3.3V DC ±0.3V DC at 110mA
Mechanical66.2mm x 31.8mm x 8.9mm
TemperatureTemperature range (operation): -40 to +85° C
Temperature range (storage): -55 to +105° C
Weight11g
MTBFModule only: 7,668,124 hours
Warranty1 Year
RoHSCompliant

Ordering Details

Board97779-00 Res SMT 360 on carrier board
Accessories96960-05 Res SMT 360 Starter Kit
97975-00 Res SMT 360 module

66800-00 5.0V, 27dB GPS antenna, mag mount, 5 meter cable, SMB connector
66800-40 5.0V, 27dB GPS antenna, mag mount, 5 meter cable, SMA connector
66800-50 3.0V, 27dB GPS antenna, mag mount, 5 meter cable, MCX connector
66800-52 3.0V, 27dB GPS antenna, mag mount, 5 meter cable, SMA connector
66801-00 3.0V, 27dB GPS antenna, 80mm cable, HFL connector, unpackaged

57861-20 Bullet III 3.3V GPS antenna TNC connector, 30dB gain
57860-30 Bullet III 5.0V GPS antenna F-style connector, 35dB gain
57860-20 Bullet III 5.0V GPS antenna TNC connector, 35dB gain

101155-00 Bullet 360 Antenna 5.0V, TNC
101155-10 Bullet 360 Antenna 5.0V, F
101155-20 Bullet 360 Antenna 3.3V, TNC

97860-00 Bullet GG 5.0V GNSS ANTENNA TNC-style
97860-10 Bullet GG 5.0V GNSS ANTENNA F-style
97861-00 Bullet GG 3.3V GNSS ANTENNA TNC-style

70228-70 5.0V Hardmount GPS Antenna with TNC connector, 28 dB gain
70228-00 3.0V Hardmount GPS Antenna with TNC connector, 28 dB gain

D2805-3001 SMB plug to TNC plug cable, 1 metre using RG-174 cable
D2805-3003 SMB plug to TNC plug cable, 3 metre using RG-174 cable
D2805-3005 SMB plug to TNC plug cable, 5 metre using RG-174 cable

D2847-3010 SMB plug to TNC plug cable, 10 metre using RG-58CU cable
D2847-3015 SMB plug to TNC plug cable, 15 metre using RG-58CU cable
D2847-3025 SMB plug to TNC plug cable, 25 metre using RG-58CU cable

D2611-3001 SMB plug to TNC jack (bulkhead) cable, 0.5 metre using RG-174 cable

D2478-3001 TNC plug to TNC plug, 1 metre using RG-58C/U cable
D2478-3008 TNC plug to TNC plug, 8 metre using RG-58C/U cable
D2478-3025 TNC plug to TNC plug, 25 metre using RG-58C/U cable

D2606-3008 TNC plug to N-TYPE, 8 metre using RG-58C/U cable
D2606-3025 TNC plug to N-TYPE, 25 metre using RG-58C/U cable

D2607-3008 TNC plug to BNC, 8 metre using RG-58C/U cable
D2607-3025 TNC to BNC, 25 metre using RG-58C/U cable

D2446-3000 F-Type to F-Type, 25 metres

Refer to the Bullet cable page for further information

Starter kit includes the RES SMT 360 reference board mounted on an interface motherboard in a durable metal enclosure, AC/DC power converter, compact magnetic mount GPS antenna, serial interface cable, and TSIP and NMEA protocols
Order Online Trimble RES SMT 360 Carrier - Order Online