Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Trimble RES SMT 360 - Multi-GNSS Timing Surface Mount Module

Ideal Solution For Mobile Products, Precise Timing When You Need It

Introduction

Introduction

Trimble® designed the RES SMT 360™ Timing Module to work in the most demanding weak signal environments, including femtocells and in-building systems. With its robust performance in low signal environments, users can save on expensive cabling and externally mounted antennas. In addition, the RES SMT 360™ timing module accepts aiding data for environments requiring the highest levels of enhanced sensitivity.

PPS and Frequency Outputs

The RES SMT 360™ timing module outputs a precise1 pulse-per-second (1PPS) and an even second pulse to maximize your network performance and synchronize systems at a global level. Custom frequencies are also available for volume sale (also consider the ICM SMT 360, a similar product with 10MHz frequency output)

Standard Timing features

The RES SMT 360™ timing module includes many of Trimble’s standard timing features, including Time-Receiver Autonomous Integrity Monitoring (T-RAIM) algorithm, automatic self-survey, and GNSS disciplining of the oscillator to provide an accurate frequency reference.

Carrier Board and Starter Kit Options

The RES SMT 360™ timing module can be loaded directly onto the customer’s application board. Alternatively, the module is available on a carrier board for connecting to a baseboard via an 8 pin header.

The Starter Kit provides everything you need to evaluate the RES SMT 360™ timing module, including the RES SMT 360™ on a carrier board, AC/DC power converter, antenna and USB interface cable.

Specification

Product Specification

GeneralSupports GPS, GLONASS, Galileo, Beidou, SBAS, QZSS
Supports GNSS incl QZSS
Capable of simultaneously tracking of up to 32 GNSS satellites
Positioning SystemSPS, Timing
Update rate1Hz
Time to First Fix<46s (50%)
<50s (90%) cold start
Re-acquisition<2s (90%)
Sensitivity-148 dBm cold start
-160 dBm tracking
ConnectorsNo I/O or RF connector, 28-edge castellations
Pick and place assembly, tape and reel packaging, reflow solderable
InterfacesTwo UART Serial Ports, 3.3V LVTTL compatible
PPSCMOS-compatible, LVTTL-level pulse, once per second
1 PPS Timing Accuracy: 15 ns (1 sigma)
ProtocolsSupports TSIP and NMEA 0183 standard v4.1 protocols (TSIP is recommended for full timing diagnostic information)
Bi-directional NMEA messages
Selection stored in flash memory
NMEA MessagesSupports standard GGA, VTG, GLL, ZDA, GSA, GSV and RMC NMEA messages
Messages selectable by TSIP or NMEA command
Proprietary NMEA messages (almanac data, PPS config, port configuration etc)
Selection stored in flash memory
OtherMetal Shield
Supports Assisted-GPS (A-GPS) operation.
Supports active antenna designs only
Carrier board and Starter Kit available
The RES SMT 360 multi-GNSS timing module is optimized for static timing applications
While it can be used in dynamic mode the stability of PPS may be degraded

General

Electrical+3.3 VDC to ±5%
GPS board only: 0.5W max
Mechanical19 mm W x 19 mm L x 2.54 mm H (0.75" W x 0.75" L x 0.1" H)
TemperatureTemperature range (operation): -40 to +85° C
Temperature range (storage): -55 to +105° C
Weight1.8 grams (0.06 ounce) including shield
MTBF7,668,124 hours
Warranty1 Year
RoHSCompliant

Ordering Details

Board97975-05 Res SMT 360 Timing Module, 1.02 or later firmware
97975-00 Res SMT 360 Timing Module, 1.01 firmware (no longer available)
Accessories96960-05 Res SMT 360 Starter Kit
97779-00 Res SMT 360 on carrier board

66800-005.0V, 27dB GPS antenna, mag mount, 5 meter cable, SMB connector
66800-40 5.0V, 27dB GPS antenna, mag mount, 5 meter cable, SMA connector
66800-50 3.0V, 27dB GPS antenna, mag mount, 5 meter cable, MCX connector
66800-52 3.0V, 27dB GPS antenna, mag mount, 5 meter cable, SMA connector
66801-00 3.0V, 27dB GPS antenna, 80mm cable, HFL connector, unpackaged

57861-20 Bullet III 3.3V GPS antenna TNC connector, 30dB gain
57860-30 Bullet III 5.0V GPS antenna F-style connector, 35dB gain
57860-20 Bullet III 5.0V GPS antenna TNC connector, 35dB gain

101155-00 Bullet 360 Antenna 5.0V, TNC
101155-10 Bullet 360 Antenna 5.0V, F
101155-20 Bullet 360 Antenna 3.3V, TNC

97860-00 Bullet GG 5.0V GNSS ANTENNA TNC-style
97860-10 Bullet GG 5.0V GNSS ANTENNA F-style
97861-00 Bullet GG 3.3V GNSS ANTENNA TNC-style

70228-70 5.0V Hardmount GPS Antenna with TNC connector, 28 dB gain
70228-00 3.0V Hardmount GPS Antenna with TNC connector, 28 dB gain

D2478-3001 TNC to TNC, 1 metre using RG-58C/U cable
D2478-3008 TNC to TNC, 8 metre using RG-58C/U cable
D2478-3025 TNC to TNC, 25 metre using RG-58C/U cable

D2606-3008 TNC to N-TYPE, 8 metre using RG-58C/U cable
D2606-3025 TNC to N-TYPE, 25 metre using RG-58C/U cable

D2607-3008 TNC to BNC, 8 metre using RG-58C/U cable
D2607-3025 TNC to BNC, 25 metre using RG-58C/U cable

D2446-3000 F-Type to F-Type, 25 metres

Refer to the Bullet cable page for further information

Starter kit includes the RES SMT 360 reference board mounted on an interface motherboard in a durable metal enclosure, AC/DC power converter, compact magnetic mount GPS antenna, serial interface cable, and TSIP and NMEA protocols
Order Online Trimble RES SMT 360 - Order Online