Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Kontron Embedded Modules

Kontron CRTtoLCD-6

CRT/DVI Input Flat Panel Controller

Easy Connection of LCD Flatpanels to RGB & DVI-Video sources
 
Kontron CRTtoLCD-6
  
  • Analog to digital converter
  • Wide range of panel support
  • Uses standard analog VGA cable or
  • Standard DVI-D cable
  • 12V only needed
  • On screen display



Datasheet/Manual:

Kontron CRTtoLCD-6 datasheet in PDF format Datasheet in PDF format
Kontron CRTtoLCD-6 manual in PDF format Manual in PDF format
 

Introduction

The CRTtoLCD-6 is a highly integrated flatpanel controller that allows to connect standard analog RGB and DVI to digital and LVDS Flatpanels. It includes all the necessary functionality to design a full featured LCD monitor. From a single 12 V power supply, the CRTtoLCD-6 generates all the voltages required by a TFT panel and includes power sequencing features and backlight support.

Typical Applications:

  • Point of Sales (POS)
  • Point of Information (POI)
  • Gaming Machines etc
  • Industrial Environment with VGA (15-Pin) and DVI.

The list of supported panels is now too large to show in a single webpage, they are now shown in the 'flat panel selector'. To run the flat panel selector, click here and choose the CRTtoLCD-6 as the model to see what panels are supported.

CRTtoLCD-6 layout
 
 

Specification
General:

One product for different resolutions
Analog-Input Features:

Analog RGB-Interface, Resolution up to UXGA 60 Hz
15 Pin standard VGA connector
All color depths up to 24 bits/pixel
DVI-Input Features:

Standard DVI-D-Connector
Resolution up to UXGA 60 Hz
High-Quality Advanced Scaling:

Horizontal/vertical zoom
Integrated On-Screen Display:

5 button user interface
On Screen Display (OSD) control for all features
Specials:

Two independent power supplies for flatpanel (up to 3 A) and controller
High power connector for backlight (up to 4 A) with LVDS version
Capability of connecting light sensor to control backlight brightness
Display Interface Features:

Backlight dimming support
FLEX32 (18 Bit TTL)
JILI30 (2x 24 Bit LVDS)
Output up to SXGA@75 Hz

Dimensions:

Width 95 mm, length 118,6 mm
Mechanically compatible to CRTtoLCD-1-LC, - TC
Cables:

Cable-Kits for flatpanels of all leading manufacturers are available
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

21082 CRTtoLCD-6 with analog RGB and DVI Input (for LVDS Flatpanels)
21084 CRTtoLCD-6 with analog RGB Input (for LVDS Flatpanels)
21081 CRTtoLCD-6 with analog RGB and DVI Input (for TTL Flatpanels)
21083 CRTtoLCD-6 with analog RGB Input (for TTL Flatpanels)

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories:

OSD-Panel-set 22010 includes OSD-Panel with cable
KAB-COMtoTTL 61021 Serial to TTL cable for programming the CRTtoLCD-5/6 range

Important
The serial port programming cable is required to initially configure the board

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.