Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Kontron Embedded Modules

Kontron CRTtoLCD-7

CRT/DVI/SVideo/Component Input Flat Panel Controller

Easy Connection of LCD Flatpanels To Multiple Sources

 
Kontron CRTtoLCD-7
  
  • Easy connection of flat panels
  • CRT/DVI/PAL/NTSC inputs
  • Wide range of panel support
  • Resolution up to WUXGA inc HDTV
  • RGB or LVDS LCD outputs
  • High picture quality
  • Configuration via software tools
  • TV tuner option
  • On screen display
  • Picture In Picture (PIP) ability
  • Lead free



Datasheet/Manual:

Kontron CRTtoLCD-7 datasheet in PDF format Datasheet in PDF format
Kontron CRTtoLCD-7 manual in PDF format Manual in PDF format
 

Introduction

The CRTtoLCD-7 is a highly integrated flatpanel controller that allows to connect standard analog RGB, DVI or Video sources to digital TFT panels. It includes all the necessary functionality to design a full featured LCD monitor. From a single 12 V power supply, the CRTtoLCD-7 generates all the voltages required by a TFT panel and includes power sequencing features and backlight support.

Typical Applications:

  • Point of Sales (POS)
  • Point of Information (POI)
  • Gaming Machines etc
  • Industrial Environment with VGA (15-Pin), DVI or Video Input.

The list of supported panels is now too large to show in a single webpage, they are now shown in the 'flat panel selector'. To run the flat panel selector, click here and choose the CRTtoLCD-7 as the model to see what panels are supported.

CRTtoLCD-7 layout
 
 

Specification
RGB-Interface, DVI & Video: Highest quality up to WUXGA (with full zoom & shrink capabilities) inc. HDTV
Resolution: One product for different resolutions
Analog-Input Features: Analog RGB-Interface up to WUXGA 85Hz
Component RGB and YUV
Support for Sync On Green (SOG)
Support for composite sync modes
15 Pin standard VGA connector
All color depths up to 24 bits/pixel
DVI-Input Features: High Bandwidth Digital Content Protection
Video-Input Features: S-Video or Composite Video Input (NTSC, PAL, SECAM)
High-Quality Advanced Scaling: Independent horizontal / vertical zoom
Integrated On-Screen Display: 4 button user interface
On Screen Display (OSD) control for all features
TV-Tuner (optional): PAL/SECAM/NTSC Teletext Decoder
Display-Interface Features: Backlight dimming support
FLEX32 (18 Bit direct)
JILI40/ JILI30 (2x 24 Bit LVDS)
Dimensions: 180 x 119.5 mm
Other: IR- Receiver for Standard Remote Control
Adaptive Motion Deinterlacing for optimized fast moving images powered by Faroudja
Picture-in-picture (PIP): to display two video sources at the same time
Cables: Cable-Kits for Flatpanels of all leading manufacturers are available
ROHS Status: This product is lead free/ROHS compliant.

Ordering Details:
Board:

21110 CRTtoLCD-7 with analog RGB, DVI & PAL/NTSC Video Input (for LVDS Flatpanels)
Includes High End Faroudja Deinterlacing & Component Input

21111 CRTtoLCD-7 with analog RGB, DVI and PAL/NTSC Video Input (for TTL Flatpanels)
21112 CRTtoLCD-7 with analog RGB, DVI and PAL/NTSC Video Input (for LVDS Flatpanels)
21113 CRTtoLCD-7 with analog RGB & DVI Input (for TTL Flatpanels)
21114 CRTtoLCD-7 with analog RGB & DVI Input (for LVDS Flatpanels)

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories:

OSD-Panel-set 22010 includes OSD-Panel with cable
KAB-COM 61004 Serial cable for programming the CRTtoLCD7

Important
The serial port programming cable is required to initially configure the board

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.