Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk EGPC-B201 - M.2 2260 or 2280 dual isolated CANbus 2.0/J1939

2 CAN 2.0B Ports, 1Mbps Data Rate, -40 to +85C

Introduction

Controller Area Network (CANbus) is a serial communication that was originally designed for the automotive industry. As Internet of Things (IoT) becomes a trend, CANbus is widely applied in aerospace, defense, medical, LED lighting and building automation systems. IoT application is clean, simple, and delivers low-cost wiring architecture. It also provides error detections, signaling, and fault tolerance making it more secure and reliable.

In light of this, Innodisk designed the EGPC-B201 CANbus module. It provides dual inputs and galvanically isolated circuits. This allows for an increase in CAN 2.0B interface that native CPU design does not support and is compatible with 2.0A. The module supports SAE J1939 high layer protocol as an option.

When considering the system upgrade and output expansion in industrial computers, system architects can use EMUC-B201 to immediately obtain CAN ability via M.2 interface, in either 2260 or 2280 B-M key. This diminishes the challenges that builders have when redesigning the system’s motherboards.

Specification

Function

Interface2 CAN ports
CANbus 2.0B backward compatible with 2.0A
Support SAE J1939 high layer protocol (Optional)
Data RatesSupports 100/125/250/500(default)/800/1000K
CANSupport CAN message acceptance filter
Keep configuration after hardware reboot
Up to 6000 CAN messages per second (receive data)
Support Listen-only mode
Additional driver to support
Termination resistor enabled/disabled by jumper
OtherComplies with EN61000-4-5 2.5kV surge protection
Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
PCIe based (internal PCIe to USB bridge)
Connector(s)Supplied with dual DB9 cable

General

ExpansionM.2 2260/2280 B-M
Electrical2.69W (3.3V, 815mA), all outputs unloaded
Mechanical22 x 60/80 x 8.05 mm
Conformal CoatingOn request
SoftwareWindows: XP(32bit), 7(32/64bit), 8/8.1(32/64bit), 10(32/64bit)
Linux: Kernel 2.6 and above (Native CDC-ACM driver), Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit
QNX: 6.6
TemperatureTemperature range (operation): -40 to +85°C
Temperature range (storage): -55 to +95°C
Humidity5% to 95% noncondensing
Vibration5G @7~2000Hz
Shock50G @ 0.5ms
Warranty3 Years
RoHSCompliant

Ordering Details

BoardEGPC-B201-W1
M.2 to dual isolated CANbus 2.0B Module (2260, CAN2.0B)

EGPC-B201-W2
M.2 to dual isolated CANbus 2.0B Module (2280, CAN2.0B)

EGPC-B201-W3
M.2 to dual isolated CANbus 2.0B Module (2260, J1939)

EGPC-B201-W4
M.2 to dual isolated CANbus 2.0B Module (2280, J1939)
AccessoriesN/A