Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec CPS-AO-1604LI - Analog I/O CONPROSYS I/O Model

Built-in high-performance firmware, cloud-compatible modular remote I / O unit

Introduction

Contec's CPS-AO-1604LI is an extension module with analog output interface and operates along with the CPU module-stack type controller of our CONPROSYS series. It has 4 channels of high precision analog output per module.

CPS-AO-1604LI is designed for use with the CPS-MCS341-DS1-111 based CONPROSYS modular unit - this I/O unit provides an eight analog input channels.

You can perform all processes from the development to the operation on a web browser. The functions such as Web monitoring of I/O information, alarm processing by I/O information, task divergence enable you to create a Cloud system at low cost and in a short time.

  • Bus-isolated analog output module providing high precision with 4 channels - This product offers 4 channels of bus-isolated analog output (16bit, 4ch) with high precision.
  • Compact Design - Compact design, 25.2 (W) x 94.7(D) x 124.8(H) mm, features flexibility in installation. 
  • Adaptable to a wide range of temperature between -20 and +60°C - The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments. 
  • Installation easy with two pieces of terminal support and DIN rail - You can remove a terminal connector without a screwdriver so that it can shorten the time of the replacement. As the product can be not only mounted on DIN rail but also is removable along the side rails, replacing is simple and easy as well.
  • Equipped with the LED for an operation check - The product has the LED for an operation check, which helps you visually confirm the communication status of each interface.
  • No electrolytic capacitor - Without an electrolytic capacitor, which has a limited life, we are creating the product with a longer life.

CONPROSYS Software

For more details on the software options for the CONPROSYS products, please refer to the CONPROSYS software page.

Specification

Analog Outputs

Number Of Outputs4 channels
Output type: Bus-isolated power input
Resolution16bit
Current0-20mA
Settling time20 microseconds/ch
Transition time+/-15LSB(at 25°C)
OtherData buffer: 1k-Word
Connector: 2-piece 3.81mm pitch 10-pin terminal

General

Electrical100mA (Max consumption)
Powered from base CONPROSYS module
Mechanical25.2(W) x 94.7(D) x 124.8(H) mm
Mounting: Quick mounting onto 35mm DIN or wall mountable with screws
TemperatureTemperature range (operation): -20 to +60°C
Temperature range (storage): -20 to +60°C
HumidityHumidity (operation): 10 - 90%RH (No condensation)
Humidity (storage): 10 - 90%RH (No condensation)
Weight200g
Vibration10 - 57Hz / semi-amplitude vibration 0.15m, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions
(JIS C60068-2-6 compliant, IEC60068-2-6 compliant)
Shock15G half-sine shock for 11ms in X, Y, and Z directions JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Safety/CertificationFCC, VCCI
Warranty1 Year
RoHSCompliant

Ordering Details

BoardCPS-AO-1608LI
CONPROSYS Configurable Type - Analog I/O module (8 analog outputs)
AccessoriesLRKS38
Contec CPS-MCS341-DS1-111
CONPROSYS Configurable Type - CPU module type ethernet (2x LAN, SD, USB, COM, DIO)

LRKS72
CPS-PWD-15AW12-01
12V output AC-DC Converter, 1.3A maximum current

LRKS91
CPS-PWD-90AW24-01
24V output AC-DC Converter, 3.8A maximum current