Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec CPS-COM-1PD - 1x RS-422A/485 Serial Port CONPROSYS I/O Model

Built-in high-performance firmware, cloud-compatible modular remote I / O unit

Contec CPS-COM-1PD - 1x RS-422A/485 Serial Port CONPROSYS I/O Model
Key Features
CONPROSYS Modular I/O Model
Provides 1 extra RS-422A/485 serial port
Full duplex/half duplex support
2 - 921,600bps support
200V DC bus isolation
-20 to +60°C operation

Introduction

Contec's CPS-COM-1PD is an extension COM port that performs serial communication with external device(s) and operates along with the stack type controller of our CONPROSYS series. CPS-COM-1PD has 1 channel of RS-422A/485 communication port.

CPS-COM-1PD is designed for use with the CPS-MCS341-DS1-111 based CONPROSYS modular unit - this I/O unit provides an extra one RS-422A/485 serial port to this base unit.

You can perform all processes from the development to the operation on a web browser. The functions such as Web monitoring of I/O information, alarm processing by I/O information, task divergence enable you to create a Cloud system at low cost and in a short time.

  • CPS-COM-1PD has 1 RS-422A/485-compliant serial port. Baud rates from 2 to 921,600bps can be set per each channel
  • Compact design, 25.2 (W) x 94.7(D) x 124.8(H) mm - allows flexibility in installation
  • The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in many environments
  • As the product is not only mounted on DIN rail, but also removable along the slide rails, replacing is simple and easy
  • The product has the LED for an operation check, which helps you visually confirm the communication status of serial interface
  • Contec designed this product without  electrolytic capacitors, which provides for a longer lifetime

CONPROSYS Software

For more details on the software options for the CONPROSYS products, please refer to the CONPROSYS software page.

Specification

Function

Interface1x RS-422A/485 asynchronous serial port
Full duplex/half duplex support
Data Rates2 - 921,600bps (set via software)
Other200V DC Bus Isolation
128-byte receive and 128-byte transmit FIFO buffers
DIP Switch (Full Duplex / Half Duplex), Terminator (ON/OFF)
Connector(s)2-piece 3.81mm pitch10-pin terminal

General

Electrical110mA (Max consumption)
Powered from base CONPROSYS module
Mechanical25.2(W) x 94.7(D) x 124.8(H)
Mounting: Quick mounting onto 35mm DIN or wall mountable with screws
TemperatureTemperature range (operation): -20 to +60°C
Temperature range (storage): -20 to +60°C
HumidityHumidity (operation): 10 - 90%RH (No condensation)
Humidity (storage): 10 - 90%RH (No condensation)
Weight200g
Vibration10 - 57Hz / semi-amplitude vibration 0.15m, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions
(JIS C60068-2-6 compliant, IEC60068-2-6 compliant)
Shock15G half-sine shock for 11ms in X, Y, and Z directions JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Safety/CertificationFCC, VCCI
Warranty1 Year
RoHSCompliant

Ordering Details

BoardLRKS43
Contec CPS-COM-1PD
CONPROSYS Configurable Type - Serial communication module (1xIsolated RS-422A/485)
AccessoriesLRKS38
Contec CPS-MCS341-DS1-111
CONPROSYS Configurable Type - CPU module type ethernet (2x LAN, SD, USB, COM, DIO)

LRKS72
CPS-PWD-15AW12-01
12V output AC-DC Converter, 1.3A maximum current

LRKS91
CPS-PWD-90AW24-01
24V output AC-DC Converter, 3.8A maximum current