Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec CPS-DIO-0808BL - Digital I/O CONPROSYS I/O Model

Built-in high-performance firmware, cloud-compatible modular remote I / O unit

Introduction

Contec CPS-DIO-0808BL is an extension module with isolated digital input and output interface and operates along with the stack type controller of Contec's CONPROSYS series. CPS-DIO-0808BL has 8 channels of the optocoupler isolated input and output per module. 

CPS-DIO-0808BL is designed for use with the CPS-MCS341-DS1-111 based CONPROSYS modular unit - this I/O unit provides an eight digital input channels and eight digital output channels and has a built in power supply

You can perform all processes from the development to the operation on a web browser. The functions such as Web monitoring of I/O information, alarm processing by I/O information, task divergence enable you to create a Cloud system at low cost and in a short time.

  • CPS-DIO-0808BL has  optocoupler isolated input 8 channels (supporting current sink output) whose response speed is 200microsec, and optocoupler isolated open-collector output 8 channels (current sink type).
  • You can use all of the input signals as interrupt events and also disable or enable the interrupt in bit units and select the interrupt edge.
  • The power to run the optocoupler is supplied internally.You can decide whether you want to use the internal or external power supply by the use of software.
  • This product has a digital filter to prevent input signals from carrying noise or a chattering. All input terminals can be added a digital filter, and the setting can be performed by software.
  • Zener diodes are connected to the output circuits to protect against surge voltages. The rated output is 35VDC, 100mA to the maximum per channel.
  • Compact design, 25.2 (W) x 94.7(D) x 124.8(H) mm - allows flexibility in installation
  • The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in many environments
  • As the product is not only mounted on DIN rail, but also removable along the slide rails, replacing is simple and easy
  • Contec designed this product without  electrolytic capacitors, which provides for a longer lifetime

CONPROSYS Software

For more details on the software options for the CONPROSYS products, please refer to the CONPROSYS software page.

Specification

Digital I/O/Counter/Timers

I/OsEight opto-coupler isolated inputs (Compatible with current sink output, negative logic)
Eight opto-coupler isolated open collector outputds (Current sink type, negative logic)
Negative logic - Data “0” and “1” correspond to the High and Low levels, respectively
InputsInput Resistance: 4.7kOhms
Input ON current: 2.0mA
Input OFF current: 0.16mA
Response time: Within 200microseconds
LED: DI0 - DI7 (Green)
OutputsOutput Voltage: 35VDC (Max.)
Output Current: 100mA (Max.)
Response time: Within 200microseconds
LED: DO0 - DO7 (Green)
Connectors(s)2 pieces 3.81mm pitch 10-pin terminal

General

Electrical120mA (Max consumption)
Powered from base CONPROSYS module or via internal 12V PSU
Choice set via software
Mechanical25.2(W) x 94.7(D) x 124.8(H)
Mounting: Quick mounting onto 35mm DIN or wall mountable with screws
TemperatureTemperature range (operation): -20 to +60°C
Temperature range (storage): -20 to +60°C
HumidityHumidity (operation): 10 - 90%RH (No condensation)
Humidity (storage): 10 - 90%RH (No condensation)
Weight200g
Vibration10 - 57Hz / semi-amplitude vibration 0.15m, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions
(JIS C60068-2-6 compliant, IEC60068-2-6 compliant)
Shock15G half-sine shock for 11ms in X, Y, and Z directions JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Safety/CertificationFCC, VCCI
Warranty1 Year
RoHSCompliant

Ordering Details

BoardLRKS40
CPS-DIO-0808BL
CONPROSYS Configurable Type - Digital I/O module (8x DI, 8x DO,12VDC Power supply)
AccessoriesLRKS38
Contec CPS-MCS341-DS1-111
CONPROSYS Configurable Type - CPU module type ethernet (2x LAN, SD, USB, COM, DIO)

LRKS72
CPS-PWD-15AW12-01
12V output AC-DC Converter, 1.3A maximum current

LRKS91
CPS-PWD-90AW24-01
24V output AC-DC Converter, 3.8A maximum current