Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec CPS-MC341-DS2-111 - Digital I/O, CAN Port Wired LAN CONPROSYS Model

Built-in high-performance firmware, cloud-compatible remote I / O unit

Introduction

Contec's CPS-MC341-DS2-111 is an IoT/M2M controller with isolated CAN, isolated RS-422/485, isolated digital input/output, LAN interface, and Ethernet Hub. It is equipped with the ARM CortexR-A8 processor (600MHz) and the 512MB DDR3-SDRAM system memory. On-board NOR-FLASH is utilised for a booting device. You can perform all processes on a web browser from the development to the operation. The functions such as Web monitoring of I/O information, alarm processing by I/O information, task divergence enable you to create a Cloud System at low cost and in a short time

You can perform all processes from the development to the operation on a web browser. The functions such as Web monitoring of I/O information, alarm processing by I/O information, task divergence enable you to create a Cloud system at low cost and in a short time.

  • The product measures data with an external sensor and uploads them to the Cloud server.
  • The product contains a Web server (Java applet). Even with your PC located remotely, you can monitor and update I/O information through a Web browser. On the monitoring screen, you can freely lay out the standard GUI parts (graphic, slider, button, etc.). All operations including monitoring layout, making relations with I/O information, can be achieved via the Web browser.
  • You can combine and assemble icons such as arithmetic operations, conditional branching, data outputting to perform the executions or its processes like drawing them in the flowchart. All operations can be completed on the Web browser.
  • By working with the Ethernet device (TCP/UDP), you can establish up to 10 connections and transmit or receive messages. Message communication can be accomplished from Web task script.
  • Supplied with eight digital inputs and eight digital outputs
  • Supplied with one RS-422A/485 port (up to 115.2kbps)
  • Supplied with one CAN2.0A/B isolated channel
  • Compact design, 188.0(W) × 78.0(D) × 30.5(H), features flexibility in installation.
  • The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments.
  • Use the product as Ethernet Hub so that you can connect devices in the daisy-chain.

CONPROSYS Software

For more details on the software options for the CONPROSYS products, please refer to the CONPROSYS software page.

Specification

CPU

CPU SpecARM Cortex-A8 600MHz
MemoryOn Board 512MB DDR3 SDRAM
Network10BASE-T/100BASE-TX
Dual RJ-45 interfaces
Realised as a dual port hub, so can be daisy chained
StorageOn-Board 32MB NOR Flash for OS
SD Card slot
SerialRS-422A/485:
• Channels: 1 channels
• Transmission speed: 110 - 115.2kbps
• Transmission scheme: Asynchronous, full/half duplex supported
OtherLED: Power (Green)/ Status 1 (Green) / Status2 (Red)
Switch: Reset SW, Shut Down SW
RTC: RTC built-in (battery not equipped)
CAN Port:
• CAN specification: CAN2.0A/B
• Speed: 1Mbps
• Isolation/Voltage Resistance: Isolation
• Number of channels: 1ch
• Connector: 9-pin D-SUB connector(Mal)
• LED: CAN A (Yellow)

Digital I/O/Counter/Timers

I/Os8 digital inputs
8 digital outputs
InputsInput: Optocoupler isolation /1000V
Non-voltage input (negative logic - Data 0 corresponds to High level and Data 1 corresponds to Low level)
IsolationIsolation: Photo-coupler isolation: 1000V (inputs), opto-isolation (outputs)

General

ElectricalRated input voltage: 12 - 24VDC
Input voltage range: 10.8 - 30VDC
Power consumption: 12V 0.7A (Max.), 24V 0.4A (Max.)
Connector: 2- piece 3.5mm pitch 3-pin Terminal (V+, V-, FG)
Applicable wire: AWG28 - 16
Mechanical188.0(W)×78.0(D)×30.5(H) (not include projection)
Mounting: Quick mounting onto 35mm DIN or wall mountable with screws
SoftwareUnit based on Linux kernel 3.2 (closed system by default)
TemperatureTemperature range (operation): -20 to +60°C
Temperature range (storage): -20 to +60°C
HumidityHumidity (operation): 10 - 90%RH (No condensation)
Humidity (storage): 10 - 90%RH (No condensation)
Weight250g
Vibration10 - 57Hz / semi-amplitude vibration 0.15m, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions
(JIS C60068-2-6 compliant, IEC60068-2-6 compliant)
Shock15G half-sine shock for 11ms in X, Y, and Z directions JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Safety/CertificationFCC, VCCI
Warranty1 Year
RoHSCompliant

Ordering Details

BoardCPS-MC341-DS2-111
CONPROSYS Integrated Type with Digital I/O (8x DI, 8x DO), 1 CAN and 1x RS-485
AccessoriesLRKS72
CPS-PWD-15AW12-01
12V output AC-DC Converter, 1.3A maximum current

LRKS91
CPS-PWD-90AW24-01
24V output AC-DC Converter, 3.8A maximum current