Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec CPS-MC341G-ADSC1-110 - 3G, Analog Input, Digital I/O, COM, Wired LAN CONPROSYS Model

Built-in high-performance firmware, cloud-compatible remote I / O unit

Introduction

CPS-MC341G-ADSC1-110 is an M2M controller with isolated RS-422/485, isolated digital input/output,isolated input counter, inter-channel isolated analog input, RS232C, LAN interface, Ethernet Hub and 3G network communication module.

It is equipped with the ARM®Cortex®-A8 processor (600MHz) and the 512MB DDR3-SDRAM system memory. On-board NOR-FLASH is utilized for a booting device

You can perform all processes from the development to the operation on a web browser. The functions such as Web monitoring of I/O information, alarm processing by I/O information, task divergence enable you to create a Cloud system at low cost and in a short time.

  • The product measures data with an external sensor and uploads them to the Cloud server.
  • The product contains a Web server (Java applet). Even with your PC located remotely, you can monitor and update I/O information through a Web browser. On the monitoring screen, you can freely lay out the standard GUI parts (graphic, slider, button, etc.). All operations including monitoring layout, making relations with I/O information, can be achieved via the Web browser.
  • You can combine and assemble icons such as arithmetic operations, conditional branching, data outputting to perform the executions or its processes like drawing them in the flowchart. All operations can be completed on the Web browser.
  • By working with the Ethernet device (TCP/UDP), you can establish up to 10 connections and transmit or receive messages. Message communication can be accomplished from Web task script.
  • Supplied with analog input (12-bit, 2 channels), four digital inputs and two digital outputs
  • Supplied with one RS-232 port (up to 115.2kbps) and one RS-422A/485 port (up to 115.2kbps)
  • 3G wireless support for remote access
  • Compact design, 188.0(W) × 78.0(D) × 30.5(H), features flexibility in installation.
  • The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments.
  • Use the product as Ethernet Hub so that you can connect devices in the daisy-chain.

CONPROSYS Software

For more details on the software options for the CONPROSYS products, please refer to the CONPROSYS software page.

Specification

CPU

CPU SpecARM Cortex-A8 600MHz
MemoryOn Board 512MB DDR3 SDRAM
Network10BASE-T/100BASE-TX
Dual RJ-45 interfaces
Realised as a dual port hub, so can be daisy chained
StorageOn-Board 32MB NOR Flash for OS
SD Card slot
USB1 USB interface (USB 2.0)
SerialRS-232C:
• Channels: 1 Channel
• Isolation: Non-isolated
• Transmission speed: 110 - 115.2kbps

RS-422A/485:
• Channels: 1 channel
• Transmission speed: 110 - 115.2kbps
• Transmission scheme: Asynchronous, full/half duplex supported
OtherLED: Power (Green)/ Status 1 (Green) / Status2 (Red)
Switch: Reset SW, Shut Down SW
RTC: RTC built-in (battery not equipped)
3G (UMTS):
• Support: Band1(2100MHz), Band2(1900MHz), Band5(850MHz), Band6(800MHz), Band8(900MHz), Band19(800MHz)
• SIM slot: Standard SIM
• Upload Maximum: 384kBit/s
• Download Maximum: 384kBit/s

Analog Inputs

Number Of Outputs2 differential inputs
Resolution12 bits (1/4096 of full scale)
Range0 to 20mA (30mA max)
Input Impedance250 Ohms
Nonlinearity±10LSB
OtherIsolation: Bus isolation 500V DC, inter-channel isolation: 200V
Connector: 2 piece 3.5mm pitch 10-pin Terminal
Applicable wire: AWG28 – 16

Digital I/O/Counter/Timers

I/Os4 digital inputs (It is possible to allocate 2ch to counter input)
2 digital outputs
InputsInput: 12 ~ 24VDC
Non-voltage input (negative logic - Data 0 corresponds to High level and Data 1 corresponds to Low level)
IsolationIsolation: Bus isolation 500V DC, photo-coupler isolation: 1000V
Counter/Timer(s)Counter tpye: Up count
Counter type: 1kHz

General

ElectricalRated input voltage: 12 - 24VDC
Input voltage range: 10.8 - 30VDC
Power consumption: 12V 0.8A (Max.), 24V 0.4A (Max.)
Connector: 2- piece 3.5mm pitch 3-pin Terminal (V+, V-, FG)
Applicable wire: AWG28 - 16
Mechanical188.0(W)×78.0(D)×30.5(H) (not include projection)
Mounting: Quick mounting onto 35mm DIN or wall mountable with screws
SoftwareUnit based on Linux kernel 3.2 (closed system by default)
TemperatureTemperature range (operation): -20 to +60°C
Temperature range (storage): -20 to +60°C
HumidityHumidity (operation): 10 - 90%RH (No condensation)
Humidity (storage): 10 - 90%RH (No condensation)
Weight350g
Vibration10 - 57Hz / semi-amplitude vibration 0.15m, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions
(JIS C60068-2-6 compliant, IEC60068-2-6 compliant)
Shock15G half-sine shock for 11ms in X, Y, and Z directions JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Safety/CertificationFCC, VCCI
Warranty1 Year
RoHSCompliant

Ordering Details

BoardCPS-MC341G-ADSC1-110
CONPROSYS Integrated Type with Multi-function (3G, 4x DI, 2x DO, 12bit 2xAI, 2x CNT*, 1x RS-485, 1x RS-232C) *exclusion 2x DI
AccessoriesLRKS72
CPS-PWD-15AW12-01
12V output AC-DC Converter, 1.3A maximum current

LRKS91
CPS-PWD-90AW24-01
24V output AC-DC Converter, 3.8A maximum current