Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Kontron Embedded Modules

Kontron EPIC/CE

SBC with Intel™ Celeron, dual LAN, USB2, ATX & VGA

400MHz (Fanless) & 733MHz (Fan) Versions
 
Kontron EPIC/CE (fan version)
  
  • Intel™ Celeron 400/733/1GHz CPU
  • Upto 512MB SDRAM
  • PC/104 & PC/104+ Expansion
  • Dual 10/100Base-T Ethernet
  • 6x USB2, 4x COM, 25x GPIO
  • 2x 24bit LVDS & DVO
  • Graphics & sound onboard
  • Uses ATX or 5V power supply
  • Dimensions of just 102 x 147 mm



Datasheet/Manual:

Kontron EPIC/CE datasheet in PDF format Datasheet in PDF format
Kontron EPIC/CE manual in PDF format Manual in PDF format
 

Introduction

The advantage of EPIC/CE is the combination of full PC/104 compliant IO expansion capacity with motherboard style frontside feature access. That way the CPU board itself, underneath the added IO, arrives with almost all front plate accessible functionality – avoiding cable handling & cable cost.

Kontron EPIC/CE (fanless 400MHz version)Each EPIC is a member of the EPIC board family. EPIC modules from Kontron are characterized by the same pinout and interface for PC/104 & PC/104plus, 4xUSB, DUAL LAN, Keyboard/Mouse-socket, Compact-Flash ™, CRT, LPT, Sound and COM1. This family feature allows to re-use chassis and maximizes design re-use.

This EPIC/CE hosts an Intel® ULV Celeron® processor at 400/733/1000 MHz. A SDRAM-DIMM socket for up to 512 MByte allows the use of standard notebook memory and ATX power supply (or 5V only) is as well a standard feature. These homogeneous features facilitate easy upgrades within the EPIC product family. The graphic controller is included in the chipset, that performs with up to 32 MByte UMA. Connection of displays is simplified when using these units which are complete with a JILI-Interface (JUMPtec ® Intelligent LVDS interface). JILI automatically recognizes which display is connected and independently sets all video parameters.

All EPIC are plug-and-work enabled to further reduce time-to-market.

With Kontron You stay...always a Jump ahead!

Supported Flat Panels

The list of supported panels is now too large to show in a single webpage, they are now shown in the 'flat panel selector'. To run the flat panel selector, click here and choose the EPIC/CE as the model to see what panels are supported.

EPIC Enclosure/Chassis

Looking for a suitable enclosure for the EPIC/CE - check out the Tri-M FlexTainer!
 
 

Specification
Board:

EPIC sized Single Board Computer
Plug and Play compatible to any other EPIC SBC and therefore exchangeable
CPU:

Intel® ULV Celeron® 400 MHz passive cooled
Intel® ULV Celeron® 733/1000 MHz active cooling
Chipset:

Intel® 815, ICH4
On chip graphics:

Intel® Graphics engine
Up to 4/32 MByte UMA
VRAM 2x 24 Bit LVDS

Graphics Interface:

DVO, CRT and LCD (JILI)
SDRAM:

1x SDRAM-SODIMM, upto 512MB

Ethernet:

2 controllers:
1x integrated Intel® 82562 10/100BASE-T LAN
1x Davicom DM9102AE/DM9102DE PCI Ethernet Controller

Expansion:

PC/104 (ISA) & PC/104plus (PCI)

Compact Flash Socket:

Type 1

Drives:

EIDE hard disk interface UDMA-133
Floppy Disk interface

I/O:

6x USB2
4x serial ports (1x RS232 DSUB, 3x RS232 with 1 x as RS422/485 internal)
25x GPIO (2mm DIN pins internal)
Onboard sound (Line In/Out/Mic Jack-plugs)
LPT Printer interface
Keyboard/Mouse (PS2)

Features:

Dark Boot
Lanboot
Watchdog
Real Time Clock
HW Monitor

Dimensions:

115x165 mm

Power supply:

Full ATX power supply support and ATX socket
Optional AT (5V only) power supply version

Tests done with 256MB SDRAM fitted.

EPIC-CE 400MHz
State
ATX Version
AT Version
+5V
+5V Standby
DOS Prompt
2.32A
150mA
2.47A
DOS Standby
1.81A
150mA
1.95A
Windows Idle
1.91A
150mA
2.06A
Windows 100% CPU
2.22A
150mA
2.36A
Windows 3D Performance
2.73A
150mA
2.96A

EPIC-CE 733MHz
State
ATX Version
AT Version
+5V
+5V Standby
DOS Prompt
3.07A
160mA
2.98A
DOS Standby
2.11A
160mA
2.37A
Windows Idle
2.19A
160mA
2.51A
Windows 100% CPU
3.05A
160mA
3.41A
Windows 3D Performance
3.59A
160mA
4.01A
Compatible Operating Systems

Windows® XP Embedded
Windows® XP
Windows® NT Embedded
Windows 2000
Windows® CE (free toolkit available - supports .NET)
Windows® 98
Windows® 95
QNX 6.1
VxWorks
Linux
DOS

Temperature:

Operation: 0° to 60° C
Storage: -10° to 85°C

Max. humidity:

Operation: 10% to 90%
Storage: 5% to 95% (non condensing)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

04001-0000-40-1 EPIC/CE Intel®ULV Celeron®processor with 400MHz, fanless, ATX
04001-0005-40-1 EPIC/CE Intel®ULV Celeron®processor with 400MHz, fanless, 5V

04001-0000-73-1 EPIC/CE Intel®ULV Celeron®processor with 733MHz, fan, ATX
04001-0005-73-1 EPIC/CE Intel®ULV Celeron®processor with 733MHz, fan, 5V

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories:

96072-0000-00-0 KAB-ATX-20TO10 (power cable for ATX power supplies)
96001-0000-00-0 ADA-FLOPPY-2 (floppy cable for board)
96022-0000-00-0 KAB-IDE-1 (IDE cable for board)
96015-0000-00-0 KAB-DSUB25-1 (parallel port cable for board)

97005-6400-00-3 SDRAM-SODIMM-64M SDRAM-SODIMM memory 64MB
97005-1280-00-3 SDRAM-SODIMM-128M SDRAM-SODIMM memory 128MB
97005-2560-00-3 SDRAM-SODIMM-256M SDRAM-SODIMM memory 256MB
97005-5120-00-3 SDRAM-SODIMM-512M SDRAM SODIMM memory 512MB

04001-WCE0-40-1 Complete Starterkit with EPIC/CE (400MHz ULV Celeron, ATX) board including, SDRAM, CFC, Windows CE 5.0 licence, power supply and OS installed

The following three parts make suitable enclosure kit for the EPIC/CE
FT-0455 FlexTainer body, length=4.55", rubber shock mount pad, 2 FT-EC00 end caps, suitable for EPIC boards
FT-MTG-EPIC Mounting plate for EPIC boards
FT-EC05 FlexTainer End cap, KONTRON-EPIC/CE/PM
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.