Kontron JFlex

Introduction

Every JRex features the interface to mount a JFLEX. JFLEX is an add-on I/O extension module that can be firmly screwed on top of every JRex without harming the JRex foot-print of the 3.5 size. The I/O functionality comes cable free with up to PCI performance at a fraction of the average price of comparable add-on solutions. By keeping it most cable free, low cost is maintained and manual errors are minimized. Stacked on top, the JFLEX concept opens the way for immediately available, low cost and even customisable I/O extensions.

With Kontron You stay...always a Jump ahead!

JFLEX™-Communication1

JFLEX-Communication1 enhances a JRex SBC to a total of 3xLAN and 4xUSB as well as Firewire. This enables either LAN communication, USB-IO extended or Firewire-Multimedia driven applications.

• Cable free & firmly lockable I/O extension for JRex boards
• 2 x LAN (10/100BaseT)
• 2 x USB
• 1 x Firewire (IEEE 1394)
• This is a real communication add-on

JFLEX™-miniPCI

The JFLEX-miniPCI is low cost miniPCI Type III socket for limitless IO expansion cards on the JRex CPU boards

Choose from standard miniPCI functionality - like WLAN, Firewire, SCSI, Graphics, etc plug and play on every JRex.

• Internally cable free firmly lockable choose from standard miniPCI functionality - like WLAN, Firewire, SCSI, Graphics, etc.
• Plug and play on every JRex 3.5" board miniPCI
• Type III socket - for off the shelf miniPCI IO expansion modules

JFLEX™-Sound1

JFLEX-Sound1 enhances JRex boards with the sound feature (AC97) and connectors for Line-In, Line-Out and MIC-In.

• Cable free & firmly lockable I/O extension for JRex boards
• Sound (AC97) Line-In, Line-out, MIC - jack plugs
• Extremely low cost sound add-on

JFLEX™-DUALDVI-PM

The JFLEX-DUALDVI-PM enhances JRex-PM (3.5" SBC with Pentium M) with DUAL DVI, 2x USB 2.0 and Sound. And that is done cable free, simply by stacking the JFLEX on top of the JRex-PM from the embedded line.

• Made for JRex-PM with Pentium M
• Lockable I/O extension for JRex-PM boards
• DUAL DVI (Digital)
• 2x USB 2.0
• Sound (Line-In, Line-out)
• NO Moving parts and firmly lockable

JFLEX™-4COMGPIOPCcard

I/O extension for JRex boards with: 3xCOM as 3xRS232 or as 3xTTL, 4x8bit GPIO, 1xCOM as 1xRS422/485 and with Texas Instruments PCI 1520 32bit PCMCIA drive bay.

• 3xCOM as 3xTTL via internal DIN pin row - ideal for touchpanels, GPS, etc.
• 3xCOM as 3xRS232 via surface DSUB
• 1xCOM as 1xRS422/485 via external DSUB socket and via internal DIN pin row
• 4x8bit GPIO
• PCMCIA drive 32bit: 2x Type I, II or 1x Type III, enabling WLAN and hot swap mass storage devices on JRex 3.5 " SBC

JFLEX™-3COMGPIOPCCard-USB

I/O extension for JRex boards with: 3xCOM as 3xRS232 or as 3xTTL, 4x8bit GPIO, 1xCOM as 1xRS422/485 and with Texas Instruments PCI 1520 32bit PCMCIA drive bay.

• 3xCOM as 3xRS232 via surface DSUB
• Alternatively 3xCOM as 3xTTL via internal DIN pin row - ideal for touchpanels, GPS, etc.
• 2xUSB ports
• 4x8bit GPIO
• PCMCIA drive 322bit: 2x Type I, II or 1x Type III, enabling WLAN and hot swap mass storage devices on JRex 3.5" SBC

JFLEX™-SERIALGPIO1-CAN

I/O extension for JRex boards with: 3xCOM as 3xRS232 or as 3xTTL and 1xCOM as 1xRS422/485, 4x8bit GPIO and CAN controller.

• 3xCOM as 3xRS232 via surface DSUB and via internal DIN pin row
• Alternatively 3xCOM as 3xTTL via internal DIN pin row - ideal for touchpanels, GPS, etc.
• 1xCOM as 1xRS422/485 via external DSUB socket and via internal DIN pin row
• 4x8bit GPIO
• Philips SJA1000 CAN controller, internal DIN pin connectors

JFLEX™-SERIALGPIO1-USB

I/O extension for JRex boards with: 3xCOM as 3xRS232 or as 3xTTL, LPT2, 4x8bit GPIO and 2xUSB.

• 3xCOM as 3xRS232 via surface DSUB and via internal DIN pin row
• alternatively 3xCOM as 3xTTL via internal DIN pin row - ideal for touchpanels, GPS, etc.
• 2xUSB ports
• 4x8bit GPIO
• second LPT port for low cost displays or additional printers

JFLEX™-SERIALGPIO1

JFLEX-SERIALGPIO1 enhances a JRex SBC to a total of 5xCOM and 4x8bit GPIO as well as a second LPT.

• 4xCOM as 3xRS232, 1xRS422/485 (DSUB and Pin row)
• alternative 3xTTL instead of 3xRS232 (internal pin row ideal for -> Touch Panels, Sensors, Modems, GPS, etc.)
• 4x8bit GPIO
• second LPT

JFLEX™-PCMCIA1

Besides exchangeable mass storage devices the JFLEX-PCMCIA1 supports ATA-Harddisks and 32Bit I/O-PC-Cards. Wireless LAN (WLAN) I/O cards can be used as well. The board is offered without software and driver. JFLEX-PCMCIA1 enables either WLAN-communication, I/O extended or exchangeable storage driven applications.

• PCMCIA drive: 2x Type I, II or 1x Type III enabling WLAN and hot swap mass storage devices on JRex 3.5" SBC
• Exchangeable Card Architecture, 16/32Bit Card Bus
• Texas Instruments PCI 1520 controller, enabling Hot Swap, Cards mix-and-match and Burst Transfers