Diamond Point International
 
Kontron Embedded Modules

Kontron JRex-PM

3.5" SBC With Intel® Pentium M CPU, 800MHz to 1.8GHz

ATX or AT Version, Fanless & Fan Versions

 
Kontron JRex-PM, Version with ATX connector, fan
 
  • Intel® Pentium ® M® upto 1.8GHz
  • Intel® Celeron ® M® upto 1GHz
  • Intel®855GM chipset, 400MHz FSB
  • DDR-SDRAM-DIMM, upto 2GB
  • Onboard 10/100Base-T Ethernet
  • CRT & LCD support via JILI
  • Uses ATX power supply
  • Optional AT (5V only) version
  • Standard PC I/O, USB2
  • Dimensions of just 102 x 147 mm



Datasheet/Manual:

Kontron JRex-PM datasheet in PDF format Datasheet in PDF format
Kontron JRex-PM manual in PDF format Manual in PDF format

 

Introduction

Each JRex is a member of the 3.5” board family. JRex modules are characterized by the same pinout and interface for Reset, Kontron JRex-PM, AT version, socketed CPU versionATX feature, 2xUSB, FAST LAN, Keyboard/Mouse-socket, Compact-Flash™, VGA and COM1. This family feature allows to reuse chassis and maximizes design re-use. Each module has the JFLEX™ interface which allows adding of additional I/O cards.

This JRex-PM hosts a Intel ® Pentium ® M ® processor at 1.1 or 1.6 GHz. A DDR-SDRAM-DIMM socket for up to 2 GByte allows the use of standard desktop memory and full ATX power supply as well a standard feature. These homogeneous features facilitate easy upgrades within the JRex product family.

The graphic controller is included in the chipset, with support of up to 32 MByte UMA. Connection of displays is simplified when using these units which are complete with a JILI-Interface (JUMPtec ® Intelligent LVDS Interface). JILI automatically recognizes which display is connected and independently sets all video parameters.

With Kontron You stay...always a Jump ahead!

Supported Flat Panels

The list of supported panels is now too large to show in a single webpage, they are now shown in the 'flat panel selector'. To run the flat panel selector, click here and choose the JRex-PM as the model to see what panels are supported.

 
 

Specification

Board:

3.5” Single Board Computer

CPU:

Intel® Mobile Celeron® 800MHz
Intel® ULV Celeron® M 1.0, 1.5GHZ
Intel® Pentium® M 1.6/2.0 GHz

Chipset:

Intel ® 855GM

Chipset features:

Integrated USB 2.0
Integrated CRT/LCD

On chip graphics:

Intel ® Extreme Graphics 2
up to 32MByte UMA Video RAM
JILI-Interface for instant panel adaptation
DVO, LVDS, CRT, Image Rotation, Dual Independent Display
VGA-interface for CRT

SDRAM:

DDR-SDRAM-DIMM with ECC support (184pin DDR-DIMM)
400 MHz FSB, up to 2 GByte DDR 266/200

Compact Flash:

Type I socket

Ethernet:

10/100 BaseT Ethernet (Davicom 9102A PCI, 10/100BASE-T LAN)
Supports Intel PXE network boot

Drives:

UDMA-100
Floppy Disc Interface

I/O:

Printer Interface
Keyboard/Mouse interface
1x RS232C
USB 2x (version 2.0, 480MBits/s)
Reset and ATX feature button
Plug'n Play compatible to any other JRex and therefore exchangeable

Features:

DarkBoot
Watchdog
Real Time Clock
JFLEX™ extension

Dimensions:

102x147 mm

Power supply:

Full ATX power supply support and ATX socket
Optional 5V only version (AT, 5V only required)

JRex-PM 1.0GHz (Celeron-M®)
State
ATX
AT
ATX 3.3V
ATX 5.0V
DOS Prompt
2.08A
0.19A
2.37A
DOS Standby
1.31A
0.19A
1.60A
Windows Idle
1.37A
0.19A
1.66A
Windows Standby
0.93A
0.19A
1.22A
Windows 100% CPU Load
2.23A
0.19A
2.52A

JRex-PM 1.1GHz (Pentium® M)
State
ATX
AT
ATX 3.3V
ATX 5.0V
DOS Prompt
2.51A
0.19A
2.80A
DOS Standby
1.38A
0.19A
1.67A
Windows Idle
1.50A
0.19A
1.79A
Windows Standby
0.81A
0.19A
1.10A
Windows 100% CPU Load
3.25A
0.19A
3.54A

JRex-PM 1.8GHz (Pentium® M)
State
ATX
AT
ATX 3.3V
ATX 5.0V
DOS Prompt
4.00A
0.19A
4.29A
DOS Standby
2.34A
0.19A
2.63A
Windows Idle
2.50A
0.19A
2.79A
Windows Standby
1.03A
0.19A
1.32A
Windows 100% CPU Load
6.10A
0.19A
6.39A
Compatible Operating Systems

Windows® XP
Windows® XP Embedded
Windows 2000
Windows® NT Embedded
Windows® CE (free toolkit available - supports .NET)
Windows® 98
Windows® 95
QNX 6.1
VxWorks
Linux
DOS

Temperature:

Operation: 0° to 60° C
Storage: -10° to 85°C

Max. humidity:

Operation: 10% to 90%
Storage: 5% to 95% (non condensing)

ROHS Status:

This product is lead free/ROHS compliant.


Ordering Details:
Board:

02004-0005-06-4 JRex-PM Intel® Celeron M (BANIAS) ULV CPU with 600 MHz and 512 KB
02004-0000-08-2 JRex-PM Intel® Processor 800MHz 0KB L2 cache (Dothan), FANLESS ATX
02004-0005-08-2 JRex-PM Intel® Processor 800MHz 0KB L2 cache (Dothan), FANLESS, 5V
02004-0000-18-2 JRex-PM Intel® Pentium® M processor 745 with 1.8GHz (DOTHAN), 2MB L2, ATX
02004-0005-18-2 JRex-PM Intel® Pentium® M processor 745 with 1.8GHz (DOTHAN), 2MB L2, 5V

02004-WCE0-16-1 JRex-PM Windows CE KIT
Complete Starterkit with JRex-PM (Pentium M 1.6GHz, ATX) board including, DDR-RAM, CFC, Windows CE 5.0 licence, power supply and OS installed.

ALL FEATURE Intel Extreme Graphics 2 engine with 2x32MB VRAM UMA for VGA&LCD, JILI & CRT Interface, 10/100Base-T, 2xCOM, 2xUSB 2.0, LPT, IDE. JFLEX extension. DDR-SDRAM-DIMM-socket. Compact-Flash™ socket.

Please note that boards are supplied with no cables, software or manuals.

Accessories:

96001-0000-00-0 ADA-FLOPPY-2 (floppy cable for board)
96022-0000-00-0 KAB-IDE-1 (IDE cable for board)
96015-0000-00-0 KAB-DSUB25-1 (parallel port cable for board)

97009-2560-00-0 DDR-SDRAM 256MB DIMM PC266
97009-5120-00-0
DDR-SDRAM 512MB DIMM PC266
97009-1024-00-0 DDR-SDRAM 1 GB DIMM PC266
97010-2560-00-0 DDR-SDRAM 256MB DIMM PC266 ECC
97010-5120-00-0 DDR-SDRAM 512MB DIMM PC266 ECC
97010-1024-00-0 DDR-SDRAM 1GB DIMM PC266 ECC
97010-2048-00-0 DDR-SDRAM 2GB DIMM PC266 ECC

96070-0000-00-0 ATX/Reset/2LED connector
02090-0000-00-0 Mounting Kit for JRex boards.

Mounting kit contains 8 pieces of threaded bolts (16mm, inside-inside) 4 pieces of threaded bolts (16mm,inside-outside) and 10 screws.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.

 
© 2008 Diamond Point International. All rights reserved.