Call us: +44 (0)1634 300900 | E-mail:

Diamond Point International

Contec SPI-C2160-LLVA - Industrial PICMG 1.3 SBC with E3-1200v2 CPU Support

Supports up to quad core Xeon E3-1275v2 3.5GHz CPU, up to 16GB DDR3 SDRAM with ECC


Contec's SPI-C2160-LLVA series, is a PICMG 1.3 SHB (Single Host Board) supporting the Intel® Core i3/i5/i7 and Xeon E3-1200v2 series processors.

SPI-C2160-LLVA series built with dual Intel® Gigabit Ethernet. Two DDR3 long DIMM sockets support system memory up to 16GB. Two SATA 600 ports and Four SATA 300 ports (dual ports via backplane) support RAID 0, 1, 5, 10. Support multiple display by DVI-I (DVI-D + VGA) on bracket and HDMI ports. The SBC also equipped with four USB 3.0 ports (dual ports on bracket). It can offer 5Gbps data transfer rate which is higher than the current USB 2.0.

To meet bandwidth of storage and expansion cards requirement, the SPI-C2160-LLVA series were designed flexible with four PCI Express lanes via backplane. Those four PCI Express lanes could be four PCI Express x1 links or one PCI Express x4 link by different bios support. Four PCI Express x1 links configuration can support more PCI Express x1 devices via backplane and one PCI Express x4 link configuration can support RAID card or special add-on cards such as image processing board. In addition, the flexible configuration can be leveraged with bridge on backplane to support more PCI or PCI-X slots that benefits industries with legacy support. PCI Express x16 from processors can be one PCI Express x16 or two PCI Express x8 or One PCI Express x8 + Two PCI Express x4 by jumper setting with C216 chipset. It only supports one PCI Express x16 with Q77 chipset. Intel C216 chipset be very flexible for customer to adopt with server or non-server BP.

Advanced Management Technology (AMT) 8.0 is feature that SPI-C2160-LLVA series equipped with Xeon E3-1200v2 family and Core i5/i7 processors provides (Core i3 doesn’t support AMT). This technology provides remote access capability via Intel® Gigabit Ethernet controller. The new technology is a hardware-based solution that uses out-of-band communication for system management access to client systems. 



CPU SpecIntel® Xeon E3-1200v2 family and Core i3 Processor
LGA1155 socket
ChipsetIntel® C216 PCH
Memory2x 240-pin ECC DIMM sockets, DDR3 1333/1600 SDRAM
ECC, non-buffered DIMMs only
Up to 16GB capacity
Graphics1x DVI-I on Bracket, 1x HDMI
Network1x Intel® 82579LM,
1x Intel® 82574L
Wake on LAN supported
StorageSATA: 2x SATA 3.0, 4x SATA 2.0 (two via backplane)
FDD: 1x FDD channel on board box header
USB4x USB 3.0 on board (Two ports on board, two ports on Bracket)
6x USB 2.0 on SBC (pin-header)
4x USB 2.0 throught golden finger
Serial1x RS-232, 1x RS-232/422/485
AudioRealtek ALC662-GR 7.1 channel HD Audio
1x Line-out, 1x Line-in, 1x Mic-in
OtherWatchdog Timer: 1 - 255 sec/ min per step
Parallel port: 1 port
PS/2: PS/2 Keyboard, PS/2 Mouse on board box header
GPIO: 8-bit programmable digital input/ output
Other I/O: System reset switch, external speaker, Keyboard lock and HDD active LED
BIOSPhoenix system BIOS
Power ManagementS1, S3, S4, S5 modes


• 1x PCIe(x16)
• 2x PCIe(x8)
• 1x PCIe(x8) + 2x PCIe(x4)
• 4x PCI devices at 32-bit 33 MHz
ElectricalPower type: ATX (Support AT mode)
Power consumption Typical: +12V@6.96A ; +5V@0.32A
Mechanical338.5 x 126.39 mm
Conformal CoatingN/A
TemperatureTemperature range (operation): 0 to +55°C
Humidity5 - 95%RH (no-condensation)
Warranty2 Years

Ordering Details

Intel ® Xeon ® E3-1200v2/Core™ i3 PICMG 1.3 Workstation Single Board Computer

Need storage - try Innodisk SSD