Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron KTAM3874/pITX - 2.5" Pico-ITX Motherboard with TI Cortex A8

Up to 1GB DDR3 SDRAM, 5V Powered, 2x 10/100 LAN, microSD & USB2

Introduction

With its new low-power embedded motherboard for the extended temperature range, Kontron is accelerating the development of especially robust and energy-saving ARM-based SFF designs. The Kontron motherboard KTAM33874/pITX is equipped with the Ti Sitara™ 3874 processor and provides tablet PC class performance and a comprehensive range of standard and embedded computing interfaces. With its Pico-ITX™ compliance it offers OEMs the possibility to realize cost-efficient SFF embedded appliances based on a standardized form factor. OEMs can now exploit the whole ecosystem which to date has been used for x86 technology. This helps to significantly reduce hardware development costs in comparison to full custom designs and increase long-term availability. If no individual hardware adjustments are required, then the board, which supports Linux, Android and Windows WEC7 is application-ready and can be immediately deployed.

The Kontron Pico-ITX™ board based on the ARM Cortex A8 single-core processor boasts a low TDP (Thermal Design Power) which makes it extremely suitable for compact, fanless applications. It is also the first Kontron motherboard designed from scratch for the extended temperature range of -40 °C to 85 °C. It is therefore fit to cope with even the most adverse environmental conditions. Examples of application areas for the new Kontron Pico-ITX™ motherboard are autonomous battery- or solar-powered outdoor systems or mobile or stationary dual-display applications like Box PCs, HMIs and thin clients. The target markets include building and home automation, industrial automation, digital signage and transportation as well as medical and military.

For the KTAM3874/pITX with energy-efficient ARM processor technology Kontron has announced a minimum of 7 years long-term availability. On its 100 x 72 mm sized standard small form factor this highly integrated motherboard offers everything that developers need to realize complete systems: an extensive range of interfaces and on-board Flash memory mean that there is no need for OEMs to source any additional components. A SIM card slot and the low average power consumption of less than 5 watts even facilitate the development of appliances in self-sufficient continuous operation in environments without power supply or network lines.

Specification

CPU

CPU SpecTI® AM3874 SitaraTM up to 800 MHz

ARM® CortexTM-A8
ChipsetAMD A55E
Memory1GB Dual 32bit DDR3-800 memory onboard (up to 2 GB optional)
Graphics2 independent graphic outputs
1x HDMI 1.3a, up to 1080p
1x LVDS dual channel 24bit, up to 1080p
Network2x 10/100 Mb/s Ethernet with integrated optional switch
Storage1x microSD card slot
Onboard 4GB eMMC Nand flash (optionally up to 16GB)
Expansion1x mPCIe® 2.0 port (x1 lane)
USB4x USB 2.0 (2 on front I/O, 2 internal (1x USB client))
1x USB 2.0 on mPCIe connector
Serial2x RS232
1x RS232/485
AudioAnalog audio interface (Line-In, Line-Out, Mic-In)
1 W Speaker interface
Other26x GPIOs
1x I2C
2x CAN Bus
1x UART
Timer and SPI output shared with GPIO´s
1x SIM-card slot onBoard for mPCIe modem cards
BIOSAMI BIOS
Power ManagementACPI 3.0

General

Electrical5V only power supply (+5V DC ±5%)
4.9 W idle power consumption
5.9 W 100% load power consumption
Lockable DC Power Connector
MechanicalPico-ITXTM form factor 100 x 72 mm ±0.2 mm (complete with all connectors 100 x 79 mm)
Height approx. 26 mm
Conformal CoatingN/A
SoftwareWEC7
Linux
Android
TemperatureTemperature range (operation): -40°C to 85°C
It is the customer's responsibility to provide sufficient airflow around each of the components to keep them within the allowed temperature range
Temperature range (storage): -55 to +125°C
Humidity(operation) 10% - 90% relative humidity (non-condensing)
(storage) 5% - 95% relative humidity (non-condensing)
MTBF220883 hours @ 40ºC
Warranty2 Years
RoHSCompliant
Availability:Last time buy date: 30 June 2016

Ordering Details

Board03005-1040-90-0
Ultrasmall 2.5" Pico-ITXboard with TI Cortex A8 ARM Processor,1GB DDR3, 4GB NAND Flash, Linux preloaded to Flashh
Accessories25HK-AB-050A400-D5-1 PSU, 5V, 4A, 2.1mm jack, ideal for pITX boards

03101-0000-00-S5 Universal Accessory-Kit ARM
Accessory kit includes:
• 1x KAB-AC power 2pin euro cable
• 1x KAB-SOUND-CMP-2 cable
• 1x AC/DC-Adapter 5V 4A
• 1x Power/Reset Push Button Set
• 1x KAB-USB-2 cable
• 1x KAB-SATA-1 cable
• 1x Power Cord US cable
• 1x KAB-ADAPT-DSUB-9-2

Need storage - try Innodisk SSD