Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron KTT20/pITX - 2.5" Pico-ITX Motherboard with NVIDIA TEGRA 2

Up to 1GB DDR SDRAM, 5V Powered, 10/100 LAN, microSD & USB2

Introduction

With its standard-based form factor and readily available environment of housings and cooling solutions, the new Kontron Pico-ITX™ embedded motherboard KTT20/pITX is the fastest route for OEMs to take to bring ARM technology into their designs. With a maximum power consumption of only 3 watts, the new embedded motherboard enables fanless designs with an unprecedented performance per watt ratio and rich graphics capabilities for cost-sensitive SFF applications. And with Kontron's comprehensive software support, including board support packages for all relevant OS, OEMs can create new applications or scale their applications across all processor platforms with minimal efforts. Especially graphics-intensive applications that have to provide a rich user experience for internet, multimedia content delivery and sophisticated human machine interfaces benefit from the long-term availability of the Kontron KTT20/pITX. Target applications include, for example, set-top boxes for hotels, compact in- and outdoor digital signage players for stationary or in-vehicle use, POS/ POI systems and mobile medical monitors / medical carts plus compact Panel-PCs and thin clients.

Specification

CPU

CPU SpecNVIDIA Tegra 2 900Mhz Dual Core
ARM Cortex-A9 CPU
3 W typical
ChipsetAMD A55E
MemoryOnboard 32bit DDR-2 512MB or 1GB
Graphics1x LCD up to WSXGA+ (1680x1050)
1x DVI-D up to 1080p
Ultra low power GeForce GPU with enhanced 3D capabilities
Backlight output selectable 5V or up to 15V external bypass
Network1x 10/100 Mbit Ethernet (SMSC® LAN9514)
Storage1x microSD-Card-Slot
1x NAND Flash optional
Expansion1x mPCIe slot
USB5x USB 2.0
Serial3x RS232
AudioAudio, 2 channel line in, line out, MIC, speaker amp out
OtherUp to 42x GPIOs
BIOSAMI BIOS
Power ManagementACPI 3.0

General

Electrical5V only power supply (+5V DC ±5%)
3.72 W Idle power consumption
Lockable DC Power Connector
Battery charger module for 3cell LI-ION battery packs on request or optional;
MechanicalPico-ITXTM form factor 100 x 72 mm ±0.2 mm (complete with all connectors 100 x 79 mm)
Height approx. 23 mm
Conformal CoatingN/A
SoftwareWEC7
Linux
Android
TemperatureTemperature range (operation): 0 to +60°C
It is the customer's responsibility to provide sufficient airflow around each of the components to keep them within the allowed temperature range
Temperature range (storage): -40°C to 85°C
Humidity(operation) 10% - 90% relative humidity (non-condensing)
(storage) 5% - 95% relative humidity (non-condensing)
MTBF243526 hours @ 40ºC
Warranty2 Years
RoHSCompliant
Availability:Last time buy date: 30 June 2016

Ordering Details

Board03004-1005-10-0
Ultrasmall ARM-based 2.5" Pico-ITX Motherboard with NVIDIA TEGRA 2 Prozessor,1GB DDR3, 512 MB NAND Flash, Linux preloaded to Flash
Accessories25HK-AB-050A400-D5-1 PSU, 5V, 4A, 2.1mm jack, ideal for pITX boards

03101-0000-00-S5 Universal Accessory-Kit ARM
Accessory kit includes:
• 1x KAB-AC power 2pin euro cable
• 1x KAB-SOUND-CMP-2 cable
• 1x AC/DC-Adapter 5V 4A
• 1x Power/Reset Push Button Set
• 1x KAB-USB-2 cable
• 1x KAB-SATA-1 cable
• 1x Power Cord US cable
• 1x KAB-ADAPT-DSUB-9-2

Need storage - try Innodisk SSD