Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

B&B Elinx EIR Series Ethernet Copper Extenders - Extends Ethernet up to 2600m

Industrial grade, 10/100 Ports, DIN Rail Ethernet Router

Introduction

Elinx Extenders extend your Ethernet connections up to 8,530 ft. (2,600 m) via coaxial cable or up to 6,200 ft. (1,900 m) over a pair of unused straight copper wire.

The EIR-EXTEND and EIR-EXTEND-4 Ethernet copper extenders are designed to operate in harsh environments. Functioning at temperatures from (-40 to 75º C), they have been tested for functional operation up to 85º C. Using existing copper wire runs, it allows the extension of Ethernet signals. The EIR-EXTEND (used to connect to 1 remote device) and EIR-EXTEND-4 (used to connect up to 4 remote devices) are the perfect solution for installing Ethernet connectivity on the factory floor. Used in pairs, configuration is easy. Configure one unit as the local device, and the other one as the remote device. External power supplies are required (not included).

EIR-EXTEND 
Speed Distance Up To
1 Mbps 6200 ft. (1900 m)
10 Mbps 4500 ft. (1400 m)
20 Mbps 3200 ft. (1000 m)
30 Mbps 2550 ft. (700 m)
50 Mbps 980 ft. (300 m)

Specification

Main Specification

FunctionEIR-EXTEND-4 only:
• UL508 and NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
• IEC61000-6-2 EMC for Heavy Industrial environment
Interface(s)Extender Interface:
Connector:
• EIR-EXTEND/EIR-EXTEND-4: RJ-11 or Terminal Block
• EIR-EXTEND-C: BNC
Cable:
• EIR-EXTEND/EIR-EXTEND-4: 24 AWG Copper Pair 100 Ohm Impedance
• EIR-EXTEND-C: Coaxial Cable (5C2V / RG6AU)
Ethernet Interface:
• EIR-EXTEND: one 10/100BaseTX port with RJ-45 connector
• EIR-EXTEND-4: four 10/100BaseTX port with RJ-45 connector
• EIR-EXTEND-C: one 10/100BaseTX port with RJ-45 connector
Connection(s)See interfaces

General

ElectricalEIR-EXTEND
• Input Voltage: 12 VDC – Power Jack, 12 – 30 VDC Terminal Block
• Input Connection: 350 mA (Power Jack), 175 mA (Terminal Block)
• Power Consumption 4.2 W Max

EIR-EXTEND4
• Input Voltage: 48 VDC – Power Jack, 24 - 48 VDC Terminal Block
• Power Consumption 8.4 W Max (0.18A@48VDC)

EIR-EXTEND-C
• Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack)
• Power Consumption: 7.2W Max. 0.6A@12VDC, 0.15A@48VDC
MechanicalCase: DIN Mount IP30 Aluminum
Dimensions: 5.0 x 11.12 x 13.5 cm (1.97 x 4.38 x 5.31 in)
TemperatureTemperature range (operation): -40 to 75°C
Temperature range (storage): -40 to +85°C
WeightWeight: 0.8 kg (1.76 lbs)
WarrantyLifetime
RoHSCompliant

Ordering Details

BoardEIR-EXTEND
DIN Rail 1 port Ethernet Copper Extender (no power supply included)
Sold in single packs - two required per system

EIR-EXTEND-4
DIN Rail quad port Ethernet Copper Extender (no power supply included)
Sold in single packs - two required per system

EIR-EXTEND-C
Hardened 10/100 Base-TX Coaxial Extender
AccessoriesN/A