Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

B&B Elinx EIRM Series Managed Ethernet Copper Extenders - Extends Ethernet up to 1900m

Industrial grade, 10/100 Ports, Managed DIN Rail Ethernet Extebder with PoE port

Introduction

B&B Electronics’ Industrial Hardened EIRM-EXTEND is a point-to-point Managed Ethernet Extender designed to operate in harsh environments that efficiently extends 10/100 Ethernet circuits to over 300meters (984feet) at 50Mbps using existing cross-over pair copper wire.

The EIRM-EXTEND Managed Ethernet Extender operates at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). The EIRM-EXTEND will allow Ethernet connectivity in existing facilities without pulling extra cable. This is the perfect solution to Ethernet on the factory -floor where systems have been upgraded from slower serial communications to Ethernet networking. Installation is easy with a single switch setting; one end is set for local and the other remote.

The EIRM-EXTEND is used in pairs to extend Ethernet connectivity over existing voice grade copper wire. The EIRM-EXTEND provides LED display for Power, VDSL speed and Ethernet connection status. The EIRM-EXTEND also provides several advanced functions such as System, SNMP, F/W upgrade, and Load Default setting through the Web based browser to enhance total networking performance. 

Specification

Main Specification

FunctionStandards: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3x, Ethernet over VDSL
Protocols: Transparent to higher layer protocols
Flow Control: Half-duplex back-pressure and IEEE802.3x Full-duplex flow control
Interface(s)ETHERNET INTERFACE
• Ports: One or eight Ethernet 10/100BASE-TX Full/Half-duplex Auto- Negotiation, Auto-MDI/MDIX
• Speed: 10/100 Mbps
• Distance: 320 ft. (100 m)
• Cable: 100Base-TX UTPCAT 5 (4 pair)

Extender Interface
• Port: One RJ-11 or Terminal Block
• Speed: 1/3/5/10/15/20/25/30/40/50Mbps
• Distance: Up to 6,232 ft. (1.9 km)
• Cable: 24 AWG Copper Pair (0.5mm diameter, 1 pair wire) or larger 100 Ohm impedance
Connection(s)Console Port: Port One DB9 RS232 port

General

ElectricalEIRM-EXTEND
• Input Voltage: 12 to 32VDC
• Power Use: 5.76W Max. 0.48A@12VDC, 0.24A@24VDC
• Input Connection: (Terminal Block);12VDC (DC Jack)
• Protection: Reverse Polarity Protection

EIRM-EXTEND-8:
• Input Voltage: 12 to 48VDC
• Power Use: 11W Max. 0.92A@12VDC, 0.46A@24VDC
• Input Connection: (Terminal Block); 12VDC (DC Jack)
• Protection: Reverse Polarity Protection
MechanicalCase: DIN Mount IP30 Aluminum
Dimensions:
EIRM-EXTEND: 50 mm (W) x 110 mm (D) x 135 mm (H), 1.97” (W) x 4.33” (D) x 5.31” (H))
EIRM-EXTEND-8: 60 mm (W) x 125 mm (H) z 145 (H), 2.36” (W) x 4.92” (D) x 5.71” (H))
TemperatureTemperature range (operation): -40 to 75°C
Temperature range (storage): -40 to +85°C
Humidity5% to 95% Non-condensing
WarrantyLifetime
RoHSCompliant

Ordering Details

BoardEIRM-EXTEND
Managed Ethernet Extender, 1 local LAN port
Sold in single packs - two required per system

EIRM-EXTEND-8
Managed Ethernet Extender, 8 local LAN ports
Sold in single packs - two required per system
AccessoriesN/A