Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

B&B Elinx EIRP600 PoE Series - Managed 10 port DIN-Rail PoE Ethernet Switch

Industrial grade, Compact unmanaged, 10/100/1000, DIN-Rail PoE Ethernet switch

Introduction

Power over Ethernet (PoE) means that power is transmitted over the Ethernet cable along with the data lines. Each PoE switch has a set of ports that is classified as power source equipment (PSE). Since the ports can power IEEE 802.3af compliant powered devices (PD), the need for a separate power line to be run to each end device is eliminated.

The EIRP610-2SFP-T is a 10 Port Managed Industrial PoE Gigabit Ethernet Switch. In addition to 8 PoE copper RJ-45 ports, it has 2 RJ-45/SFP Combo ports to accommodate Gigabit Ethernet.

Small Form-factor Pluggable (SFP) Port: The SFP Ports provide flexibility when planning a network. Modules are available in multiple fiber formats. If an SFP module is not inserted, the associated combo port can be used with standard RJ-45 copper.

High-Speed Transmissions: The switch includes a switch controller that automatically senses transmission speed (10/100/1000 Mbps). The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol.

Power Over Ethernet (PoE): The eight 10/100 ports are classified as power sourcing equipment (PSE). These ports can be used to power IEEE 802.3af compliant powered devices (PD), eliminating the need for a separate power supply for each device.

Dual Power Input: To reduce the risk of power failure, the switch has two 48 VDC power inputs.

Specification

Main Specification

FunctionStandards:
• IEEE 802.3 802.3. 10Base-T Ethernet
• IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet
• IEEE 802.3ab 1000Base-T
• IEEE 802.3z Gigabit Fiber
• IEEE 802.3x Flow Control and Back Pressure
• IEEE 802.3ad Port trunk with LACP
• IEEE 802.3f Power over Ethernet
• IEEE 802.3d Spanning Tree Protocol
• IEEE 802.1w Rapid Spanning Tree Protocol
• IEEE 802.1p Class of Service
• IEEE 802.1Q VLAN Tag
• IEEE 802.1x User Authentication (RADIUS)
• IEEE 802.1ab LLDP

PoE
• Ports: 1 through 8
• Standard: 802.3af End Point Alternative A, Power Source Equipment (PSE)
• Capacity: 15.4W per port
• Pin Assignment: 1 & 2 – VCC(+), 3 & 6 – VCC(-)
Interface(s)RJ-45 Ports: 8 x 10/100BaseT, 2 x10/100/1000, auto MDI/MDI-X
CU/SFP: 2 x Mini-GBIC SFP Combo Ports
Controller(s)Management: SNMP v1, v2C, v3, Web, Telnet, CLI
SNMP MIB: RFC 1215 Trap, RFC1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643, RFC 1757, RSTP MIB, Private MIB, LLDP MIB
VLAN:
• Port Based VLAN
• IEEE 802.1Q Tag VLAN (256 entries)
• VLAN ID (1 to 4096), GVRP (256 groups)
Port Trunk: w/LACP 4 trunk groups / 4 trunk members
LLDP: Allows the switch to advertise its Identification and capabilities on the LAN
Spanning Tree: 802.1d Spanning Tree, 802.1w Rapid Spanning Tree
X-Ring: Dual Homing, Ring Coupling, Dual Ring topologies. Recovery time below 20mS
Quality of Service: Determined by port, tag, IPv4 type of service, and IPv4/IPv6 different service
Class of Service: 802.1p class of service, 4 priority queues per port
Port Securit:y Supports 100 static MAC entries and 100 MAC Filter entries
Port Mirror: Supports TX, RX, and both packet
IGMP: IGMP Snooping v1, v2 (256 multi-cast groups and IGMP Query
IP Security: 10 IP address entries for permission to access management functions
Login Security: 802.1X Authentication / RADIUS
Bandwidth Control: Ingress Packet Filter and Egress Packet Limit. The egress rate control supports all packet types. Limit rates are: 100K to 102400 Kbps (10/100) and 100 K to 256000 Kbps (1000). Ingress packet Filter Type combination rules are Broadcast, Multi-Cast, Unknown Unicast, Broadcast/Multi-cast, Broadcast only, and all packets.
Flow Control: Flow control full-dux, backpressure half-dux
System Log: System Log and remote system log server
SMTP: SMPT SVR and 6 e-mail accounts for alerts
SNMP: Trap Cold Start, Link Down, Link Up, Authorization Fail, PD Disconnect (PoE port event)
DHCP: Client, Server, Port and IP Binding
DNS: DNS client with primary and secondary DNS server
SNTP: SNTP to synchronize system clock
Firmware Update: TFTP update, backup and restore
Connection(s)RJ45 Ports: 10/100BaseT Auto MDI/MDI-X
Fiber Ports: Mini-GBIC SFP Combo Ports
LED Indicators:
• P1, P2 (Green) to indicate power
• Fault (Red) to indicate fault
• Mater (Green) to indicate ring master
• Link Activity on 10/100 ports (Green)
• Full Duplex / Collision (Amber)
• SFP LNK/ACT (Green)
• 1000T LNK/ACT (Green)
• 1000M (Green)
• FWD on PoE ports to indicate if a powered device is connected

General

ElectricalInput Voltage: Dual 48 VDC Inputs, Reverse Polarity Protection
Power Connection: Removable Terminal Block
Wire Size: 12 to 24 AWG
Power Use: 9.6 Watts (Without PoE Load), 116 Watts (Full PoE Load)
Fault Output: 1 Relay Output – Normally Closed
MechanicalEnclosure: IP30 Metal Enclosure
Mounting: 35 mm DIN Rail or Panel Mount Attachments
Dimensions: 6.2 x 8.4 x 13.1 cm (2.44 x 3.31 x 5.16 in)
TemperatureTemperature range (operation): -40 to +75°C
Temperature range (storage): -40 to +85°C
Humidity0 to 95%
WarrantyLifetime
RoHSCompliant

Ordering Details

BoardEIRP610-2SFP-T
Ethernet Managed, 8-Port 10/100BaseTX PoE, (2)-Port 10/100/1000BaseTX, (2)-Port 100/1000 SFP Slot, Wide Temperature
AccessoriesN/A
Order Online B&B Elinx EIRP600 PoE Series - Order Online