Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro NH30 - Rugged Half 19 Inch Modular Managed Gigabit Ethernet Switch

Compact, up to 25 Port, 40TE Managed Rugged Layer 2/3 Gigabit Ethernet Switch Solution

MEN Mikro NH30 - Rugged Half 19 Inch Modular Managed Gigabit Ethernet Switch
Key Features
Modular Managed Gigabit Ethernet Switch
Dual Gb BASE-T Ethernet via M12 connectors
Up to 25 ports, modular design
Fanless and maintenance-free (fan optional)
Rugged aluminium enclosure with IP40 protection
24 to 110V DC standard PSU, others on request
EN 50155 class TX compliant (railways)
-40 to +85°C operating temperature

Introduction

MEN Mikro's NH30 is a modular turn-key network switch solution with carrier grade Layer 2 and Layer 3 VLAN routing capabilities offering a seamless throughput of 29 Gbit/s. It is designed for use in trains, trams or industrial environments.

Flexible Built-to-Order Configuration

The high-performance switch device is a modular half 19" CompactPCI® Serial system. Its build-to-order concept offers a wide range of configuration options, resulting in low NRE costs and fast time-to-market. The main switch board occupies one slot, while six option boards define the front-panel connectivity. This concept allows the NH30 to come with M12, RJ45 and SFP interfaces in mixed fiber/copper configurations. It supports a total of 25 ports. The switch firmware is already installed and is ready for operation.

Powerful and Robust Networking

Using high-speed SFP interfaces ensures robustness against any type of interference signal or other conducted emissions like bursts or flashes. This makes the switch suitable, e.g., for uplink scenarios or backbone solutions in harsh environments. As an option all copper-based port line cards can act as PoE+ (PoE class 4) power supplies with a maximum of 60 W per card. The NH30 supports IEEE1588v2 and SyncE (as future extension) timing protocols and EEE as a standard on all ports.

Two PSUs for AC/DC and USP

Two PSU slots, each with its own power source, ensure reliability and redundancy. Single or redundant AC or DC power supplies or an uninterruptible power supply (USP) can be implemented. This hardens the system against power fluctuations or power failures.

Monitoring and Control Functions

The switch comes with three relay outputs. Output 1 drives a "switch alive" signal intended to inform an external monitoring system, e.g., on board a train, about the health of the switch. An optional shelf controller rounds out the switch's self-control and selfmonitoring capabilities. It manages life-time information about, e.g., the shelf fans, power supplies and can be used for manual shutdown. For security and monitoring purposes, the shelf controller data is available via network interfaces and CLI.

Mounting and Cooling as Needed

The NH30 switch can be wall or rack-mounted and is cooled by natural convection or using an additional fan tray at the bottom of the system. Cooling is independent of the mounting position.

Specification

Main Specification

FunctionRemote management: Switch is managable remotely via Ethernet and USB console
Watchdog
CPU temperature: mirrored through Switch firmware to SNMP table space, readable through management interfaces

System Management
• Power supply status
• UPS shutdown: standby mode in the absence of external voltage and low charging level
• UPS start: System start delay until charging level has reached minimum level
• UPS status: indicates charging/discharging status and level
• Temperature monitoring
• Fan control and monitoring
• Heat-up delay
Interface(s)G101 - 3U CompactPCI® Serial Managed Industrial Ethernet Switch with the following configurations:
• RJ45: 12x 1 Gbps + 1x 2.5 Gbps (2x 1 Gbps + 1x 2.5 Gbps on front) with "on-the-Fly" SFP detectionsupport (Model: 02G101-00)
• M12: 12x 1 Gbps CU Ports (3x 1 Gbps M12 on front) (Model: 02G101-01)
Supports up to 6 line cards, depending on configuration, with optional PoE as follows:
• Option slots 1, 2 and 3 can be populated with SFP or copper based line cards
• Option slots 4, 5 and 6 can be populated with passive line cards
• All option slots are capable of supporting a mix of various types of connectors (RJ45, M12, SFP)
• All option slots offer additional PoE+ support
Shelf Management Controller
• Control panel
• Two fans
Controller(s)As the configuration of the system is modular, it is always built to order. In the following all possible functions are described. Contact us to ask how they can be combined. The system consists of the following slots:
• 2 slots for PSU
• 1 CompactPCI® Serial slot for a network CPU board (Switch Board)
• 6 CompactPCI® Serial peripheral slots
Connection(s)Base Unit:
• Reset button
• Bower button startup
• Power status LEDs - Power OK LED on front for each power supply unit
• Ethernet LEDs - Activity/Link status LED on front for each Ethernet port
• CPU status LED

General

ElectricalPower input
• Power inlet connector for each PSU slot
• Type: 3 pole Phoenix® Combicon
• Lockable
• Mechanically codeable
• Suitable for up to 230 VAC
Primary Power Supply
• 100 to 240 VAC or 24 to 110 VDC (UC-Option)
Secondary Power Supply
• None, 100 to 240 VAC, 24 to 110 VDC or UPS (UC-Option).
Power Supply Redundancy

Supply voltage (when using a 24 to 110 VDC PSU):
• 24 VDC to 110 VDC
• Nominal voltages 24, 36, 48, 72, 96 and 110V VDC, according to EN50155
• Power interruption class S2 (10 ms)

Power Consumption (Max. power available depends on used PSUs)
• Less than 30 W in base configuration
• Less than 100 W with 6 line cards without PoE
MechanicalHalf 19" system (4U, 40HP)
1/2 19" rack-mount standard
3U card vertical
Dimensions: max. 210 x 175 x 225 mm without brackets
Mounting Possibilities
• Wall-mount
• Rack-mount in 19" cabinet
• Two systems side-by-side to build a single 19" chassis
Cooling Possibilities
• Natural convection
• Fan tray at system bottom when PoE is not required
Air Flow
• If bottom and top not covered, air flow from bottom to top outlets
• If bottom and top covered, air flow from bottom front to top front outlets
Conformal CoatingConformal coating on request
SoftwareFirmware for configuration and management
TemperatureTemperature range (operation)
• EN 50155 class TX in base configuration and when equipped with GE01, GP01 and GP02 cards
• With fan if the line cards have been configured with the PoE option
• Without fan if the line cards have been configured without the PoE option
Temperature range (storage): -40 to +85°C according to IEC 60068-2-1, IEC 60068-2-2
HumidityRelative humidity (operation): according to EN 60068-2-30, EN 50155
Relative humidity (storage): max. 95% non-condensing
Altitude-300 m to +3000 m
VibrationAccording to EN50155
ShockAccording to EN50155
EMCEN 550022, EN 50121-3-2, class B (radiated emission)
EN 550022, EN 50121-3-2, class B
EN 55024, EN 50121-3-2, class A
Warranty2 Years
RoHSCompliant

Ordering Details

Board19NH30-B0
4U 40HP build-to-order modular managed Gigabit Ethernet Switch. Half 19" basic system including backplane and mounting rails, -40 to +85°C
Accessories02G101-00
25-Port Gigabit Ethernet Managed Switch, 2x RJ45 + 1x SFP 2.5 Gbps on front, 10x GE + 3x QSGMII links on backplane, -40 to +85°C with qualified components

02G101-01
24-Port Gigabit Ethernet Managed Switch, 3x M12 on front, 9x GE + 3x QSGMII links on backplane, -40 to +85°C with qualified components

02GE01-00
3U, 4-port Gigabit Ethernet passive extension card with RJ45 connectors on front, no PoE, -40 to +85°C

02GE01-01
SemiCus: 3U, 4-port Gigabit Ethernet passive extension card with RJ45 connectors on front, PoE+, -40 to +85°C

02GE01-02
3U, 4-port Gigabit Ethernet passive extension card with M12 connectors on front, no PoE, -40 to +85°C, conformal coating

02GE01-03
SemiCus: 3U, 4-port Gigabit Ethernet passive extension card with M12 connectors on front, PoE+, -40 to +85°C, conformal coating

02GP01-00
SemiCus: 3U, 4-port QSGMII Gigabit Ethernet extension card with RJ45 connectors on front, no PoE, EEE and Sync-E support, -40 to +85°C screened

02GP01-01
3U, 4-port QSGMII Gigabit Ethernet extension card with RJ45 connectors on front, PoE+, EEE and Sync-E support, -40 to +85°C screened

02GP01-02
SemiCus: 3U, 4-port QSGMII Gigabit Ethernet extension card with M12 connectors on front, no PoE, EEE and Sync-E support, -40 to +85°C screened, conformal coating

02GP01-03
3U, 4-port QSGMII Gigabit Ethernet extension card with M12 connectors on front, PoE+, EEE and Sync-E support, -40 to +85°C screened, conformal coating

02GP02-00
3U, 4-port QSGMII Gigabit Ethernet extension card with SFP cages on front, EEE and Sync-E support, -40 to +85°C screened

17PU20-00
120 W, 3U 6HP PSU, wide range input 24 to 110 VDC, 24 VDC nom., output 12, 5 and 3.3 VDC, -40 to +85°C with qualified components, conformal coating

17PU21-00
120 W, 3U 6HP PSU, wide range input 100 to 240VAC, output 12, 5, 3.3 VDC, -40 to +85°C with qualified components, conformal coating