Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 

PC/104 Board Accessories
 

PC/104 HeadersPC/104 Bus Headers

  • 64-pin and 40-pin PC/104 headers.
  • Stackthrough (long pins) available.
  • Non-stackthrough (short pins) available.

Use these parts to add your own circuit to a PC/104 system, or to add a PC/104 module to your own custom board. These are the same headers used on all our PC/104 modules and are guaranteed to be compatible with any PC/104-compliant header. Order 64-pin (8-bit main bus) and 40-pin (16-bit bus extension) components separately. Standard headers shown are stackthrough; for short-pin headers order non-stackthrough version.
 

Diamond Systems CablesCables for Diamond Systems PC/104 Modules.

  • Easy prototyping and system hookup.
  • 34-pin ribbon cable
  • 40-pin ribbon cable.
  • 50-pin ribbon cable.
  • Dual/quad serial port cable.

These ribbon cables have standard IDC connectors for mating with many of our I/O modules. Standard length is 18 inches. Select 34-pin cable for Diamond-32 digital I/O. Select 40-pin cable for Sapphire and Pearl. Select 50-pin cable for Diamond-32, Diamond-16, Diamond, Ruby, Garnet, Topaz, Quartz, and Onyx. Call for other widths or lengths.
 

PROTO-PC/104PROTO-PC/104

  • PC/104 size board fits directly on PC/104 stack.
  • .1" x .1" grid of plated holes for user circuit construction.
  • .040" Dia. holes fit ICs, discretes, and pin headers.
  • 50-pin right-angle header for user I/O connections.
  • 8-bit and 16-bit PC/104 stackthrough headers included.
  • Mounting hardware included (screws, standoffs).
  • PC/104 bus interface schematic included.
  • Provided in kit form or with headers installed.

The PROTO-PC/104 is a PC/104-format prototype board that mounts on top of the PC/104 stack and allows you to build a custom peripheral or interface for your PC/104 system. All necessary connectors and hardware are provided to reduce your component sourcing efforts. A sample schematic is included to show you how to build a simple interface to the PC/104 bus, including data I/O, address mapping, DMA, and interrupt operation.
 

STB-PC/104STB-PC/104

  • 50 screw terminals for easy user connections.
  • PC/104 size board fits directly on PC/104 stack.
  • Elevator style high-reliability contacts fit wide range of wire sizes.
  • Angled screw terminals make wire installation and removal easier.
  • 50-pin right-angle header for mating with PC/104 modules.
  • Additional 50-pin header for pass-through cable connections.
  • Mounting hardware included (screws, standoffs).

The STB-PC/104 is a miniature PC/104-format screw-terminal board that enables you to easily connect sensors, control signals, etc. to a PC/104 system. Each pin on the connector is brought out to a screw terminal, enabling you to easily add, remove, and modify wiring as needed without complicated cable construction and modifications. The screw terminals are angled for easy operation. This unique board is the same size as a PC/104 module, so it fits conveniently right on top of the PC/104 stack. All necessary mounting hardware is included.
 

PC/104 spacersPC/104 Mounting Spacers

  • 0.600" length
  • 3/16" round aluminium
  • Male/female configuration for stackthrough capability
 
 
Ordering Details:
Board:

H-104-64-ST 64-pin 8-bit main bus stackthrough header
H-104-40-ST 40-pin 16-bit extension bus stackthrough header
H-104-64-NS 64-pin 8-bit main bus non-stackthrough header
H-104-40-NS 40-pin 16-bit extension bus non-stackthrough header

C-14-18 14 pin, 18 inch ribbon cable; connectors at both ends, 2.54" pitch
C-34-18 34 pin, 18 inch ribbon cable; connectors at both ends, 2.54" pitch
C-40-18 40 pin, 18 inch ribbon cable; connectors at both ends, 2.54" pitch
C-50-18 50 pin, 18 inch ribbon cable; connectors at both ends, 2.54" pitch

C-DB9M-2 20-pin 18 inch cable with 2 DB9M connectors for Emerald-MM & Emerald-DIO
C-DB9M-4 40-pin 18 inch cable with 4 DB9M connectors for Emerald-MM-8

Proto-104-K PC/104 prototype board, unassembled kit
Proto-104-A PC/104 prototype board, headers installed
STB-104 PC/104 screw terminal board

MTG-104 PC/104 board mounting kit: 4 each PC/104 spacers, #4 screws, #4 nuts
SPC-104 PC/104 mounting spacers, 0.6"length aluminum round #4-40 M/F
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.