Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Connect Tech Inc.

Connect Tech Inc. CANpro/104 Opto

Two Port CAN Controller Card

500V Optical & Power Isolation For Each CAN Port, -40°C to 85°C Operation
 
Connect Tech Inc. CANpro/104 Opto
  
  • PC/104 compliant, two port CAN controller card
  • Two independent SJA1000 controllers
  • 16MHz CAN clock
  • 500V optical and power isolation (each port)
  • Jumper configurable setup
  • High input impendence transceivers
  • -40°C to 85°C operation
  • Windows, Linux & QNX support
  • Easy installation
  • ROHS compliant



Datasheet/Manual:

Connect Tech Inc. CANpro/104 Opto datasheet in PDF format CANpro/104 Opto Datasheet - PDF
Connect Tech CANpro/104 Opto manual in PDF format CANpro/104 Opto Manual - PDF
 

Introduction

Connect Tech’s CANpro/104 Opto combines the power of two NXP SJA1000 CAN controllers with the compact size and rugged stability of PC/104.

CANpro/104 Opto cards feature fail-safe power- up/power-down and on-board high input impendence transceivers to maximize nodes on the bus. Jumperable slew rate limiting reduces radiated emissions. 500V of optical and power isolation ensure your data is protected from disruptions that can occur with exposure to harsh conditions or environments.

Dependability, high data rates and network control capabilities make CANpro/104 Opto cards ideal for industrial control applications.

All Connect Tech products are covered by a lifetime warranty and no-charge technical support.
 
 

Specification

Number of ports:

2 ports

CAN Controllers:

Two CAN 2.0B compliant SJA1000 controllers

Connectors:

standard: 10-pin, right angled header (+5V power output)
optional: DB-9

Power Output:

500mA per port (125mA on isolated models)

CAN Controller Clock:

16MHz

Optical/Power Isolation:

500V for each CAN port from the host system

Decoded Address Range:

Configurable for BasicCAN or PeliCAN modes
BasicCAN: allows up to 16 CANpro/104 Opto cards in a stack
PeliCAN: allows up to 4 CANpro/104 Opto cards in a stack

Dimensions:

Fully PC/104 compliant

Temperature:

Operating Temperature: -40º C to 85º C (-40º F to 185º F)
Storage Temperature: -40º C to 125º C (-40º F to 257º F)

Humidity:

95% non-condensing

Bus:

PC/104

Software Compatibility:

Windows XP/Windows Server 2003/Windows Server 2008/XPe/7
QNX 6
Linux 2.6

CAN Transceivers:

Support 1.0 Mbps operation and more than 110 nodes on the bus

System Requirements:

+5V DC 500mA (max.)
Power on CAN connectors may draw up to an additional 1A

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

CNG001 CANpro/104 Opto, 2 ports - RoHS compliant
CNG001-01 CANpro/104 Opto, 2 ports, DB-9 cables - RoHS compliant
CNG002 CANpro/104 Opto, 2 ports, 3kV optical isolation, 2x DB-9 connectors on board - RoHS compliant

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.

Accessories:

N/A

Order Online!

 

ORDER ONLINE - some models from this product range are available to order on our online webshop.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.