Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Connect Tech ADG016 - PCIe/104 (PCI/104-Express) to PCI Express Adapter

Installs a PCIe Card onto a PCIe/104 or PCI-104/Express SBC (Stack Down)

Introduction

Connect Tech's PCIe/104 to PCI Express Bottom Stacking adapter allows users to install any x1, x4, x8 or x16 lane PCI Express card into a PCIe/104 or PCI/104-Express stack down configuration.

This convenient adapter board enables the testing and development for standard PCI Express cards in the PCIe/104 or PCI/104-Express environment.

Standard Usage

This adapter supports any x1, x4, x8 or x16 lane PCI Express add-in card. Simply mount the PCI Express stack to the adapter and install the PCI Express card into the slot.

Once everything is connected, you may begin using the add-in card just as you would any other PCI/104-Express add-in card. No additional configuration is required.

Specification

Interface

FeaturesPCIe/104 and PCI/104-Express compatible
Industrial temperature range of -40ºC to 85ºC
PCIe/104 156 pin top connector
x16 lane vertical PCI Express card edge connector (fits any x1, x4, x8 or x16 lane cards)
Custom support bracket to ensure PCIe card stability
Dimensions: 19.3 cm/7.6" length x 15.2 cm/6" width

General

ExpansionPCI/Express x1, x4, x8, x16 Lane Card Compatible
PCI/104-Express & PCIe/104 Compatible
ElectricalN/A
Mechanical19.3 cm/7.6" length x 15.2 cm/6" width
Conformal CoatingOn request
SoftwareN/A
TemperatureTemperature range (operation): -40°C to +85°C
Temperature range (storage): -40°C to +85°C
Humidity95% non-condensing
WarrantyLifetime
RoHSCompliant

Ordering Details

BoardADG021
PCIe/104 or PCI-104-Express to PCI Express Adapter
AccessoriesN/A