Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Connect Tech Inc.

Connect Tech Inc. Xtreme/104-Express Opto

4 or 8 Port PCI/104-Express serial port card

Switchable RS-232/422/485 protocols, up to 15.625 Mbps, 3 kV optical isolation
 
Connect Tech Inc. Xtreme/104-Express Opto
  
  • PCIe/104 compliant
  • Eight serial ports
  • Switchable RS-232/422/485
  • Speeds up to 7.8125Mbps
  • PCI Express UART with 256 bytes of transmit and receive FIFO buffers
  • Full & 1/2 duplex 485 modes
  • Supports 9-bit data modes
  • -40°C to 85°C operation
  • Easy installation
  • ROHS compliant



Datasheet/Manual:

Connect Tech Inc. Xtreme/104-Express datasheet in PDF format Xtreme/104-Express Opto Datasheet
Connect Tech Inc. Xtreme/104-Express Opto manual in PDF format Xtreme/104-Express Opto Manual
 

Introduction

Connect Tech’s PCIe/104 products offer advantages such as rapid data transfer, high reliability and reduced costs due to the stacking nature of the PC/104 form factor. Our new Xtreme/104-Express Opto serial card maximizes ruggedness by adding 3 kV optical isolation to protect your industrial and embedded applications.

Xtreme/104-Express Opto includes a fractional baud rate generator that matches almost any baud rate accurately. Additionally, Xtreme/104-Express Opto offers large 256 byte FIFO buffers, 9-bit data support, and is suitable for industrial temperature requirements (-40ºC to 85ºC).

Providing longevity for military, aerospace, medical, instrumentation and industrial control, Xtreme/104-Express Opto is the ideal choice for your critical applications.
 
 

Specification

Number of ports:

4 or 8 ports

Electrical Interface:

Hardware selectable RS-232/422/485

Connectors:

Each port has an independent connector
Connectors: Right angle, 2 x 5 pin, 0.100” pitch headers

Control Signals:

RS-232: TxD, RxD, RTS, CTS, RI, DTR, DSR, DCD, SG (Signal Ground)
RS-422/485: TxD+/-, RxD+/-, RTS+/-, CTS+/-, SR (Signal Reference)

Baud Rates:

RS-232: 50 bps to 1 Mbps
RS-422/485: up to 7.8125 Mbps

Optical Isolation:

3 kV DC, 2.1 kV AC RMS optical isolation protection per port

I/O Addresses:

Assigned by Plug and Play resources

Interrupts:

Assigned by Plug and Play resources

UART Type:

One quad or octal PCI Express UART with 256 byte transmit and receive FIFO buff ers

Dimensions:

Fully PCIe/104 compliant: 3.550” x 3.775”

Temperature:

Operating Temperature: -40º C to 85º C (-40º F to 185º F)
Storage Temperature: -40º C to 125º C (-40º F to 257º F)
Humidity: 95% non-condensing

Bus:

PCI/104-Express or PCIe/104
(PCI-104 connector is pass through)

Software Compatibility:

Windows NT4, 2000, Windows XP, Windows 7
Windows Server 2003
Windows XP Embedded
Linux 2.6
QNX 4, 6 (Neutrino)

Power:

5V DC @ 500mA (typical), 1.0 A (max.)

System Requirements:

An available x1 lane within a PCIe/104 stack

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

XFG001 Xtreme/104-Express Opto, 4 ports RS-232/422/485, includes 3kV optical isolation, RoHS compliant
XFG001-01 Xtreme/104-Express Opto, 4 ports RS-232/422/485, includes 3kV optical isolation, DB-9 cables, RoHS compliant
XFG002 Xtreme/104-Express Opto, 8 ports RS-232/422/485, includes 3kV optical isolation, RoHS compliant
XFG002-01 Xtreme/104-Express Opto, 8 ports RS-232/422/485, includes 3kV optical isolation, DB-9 cables, RoHS compliant

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.

Accessories:

N/A

Order Online!

 

ORDER ONLINE - some models from this product range are available to order on our online webshop.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.