![]() |
Sitemap - Print Page - Email Link - |
|
|
Connect Tech Inc. ADG006PC/104-Plus to Mini PCI AdapterInsert miniPCI cards onto PCI/104-Plus Stack |
![]() |
Datasheet/Manual: |
|
IntroductionThis adapter allows developers to mount a Mini PCI card, such as an IEEE 802.11 wireless LAN card, into a standard 3.3 or 5V PC/104-Plus stack. Equipped with a passive PC/104 stack-through connector, the card can be installed in a PC/104-Plus stack without interfering with the signals of PC/104 cards located above or below. The adapter includes a 3.3V regulator for use in 5V-only systems. Standard Usage and ID SelectionSimply insert the Mini PCI card into socket on the card and insert into the host system's PC/104-Plus stack. Each card within the stack must have a unique ID ranging from zero to three. You will be required to set a pair of jumpers to specify where your card is located within the stack. (Ensure that no two boards share an ID number). The jumpers remain unpopulated for an ID of zero. Populate the left jumper for an ID of one, right jumper for an ID of two, and populate both for an ID of three. No additional configuration is required. |
Specification |
|
General: |
|
Temperature: |
Operating Temperature: -40º C to 85º C (-40º F to 185º F) |
Humidity: |
95% non-condensing |
Software Compatibility: |
Operating system independent |
ROHS Status: |
This product is lead free/ROHS compliant. |
| Ordering Details: | |
Board: |
ADG006 Connect Tech PC/104-Plus to Mini PCI Adapter Please note that boards are supplied with no cables, software or
manuals. |
Accessories: |
N/A |
|
ORDER ONLINE - some models from this product range are available to order on our online webshop. |
Further Information: |
Want further information or pricing on this product? Either fill out our feedback form or contact us for further information. |
Home - About Us - Contact - Exhibitions - Feedback - News/Press Releases - Ordering - Products - RSS Feed - Support |
© 2012 Diamond Point International. All rights reserved. |



