Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Connect Tech Inc.

Connect Tech Inc. ADG016

PCI Express to PCI/104-Express Adapter

Insert PCIe/104 Or PCI/104-Express Card Into Desktop PCI Express Slot
 
Connect Tech Inc. ADG016
  
  • PCIe/104 and PCI/104-Express compatible
  • Industrial temperature range of -40º C to 85º C
  • PCIe/104 156 pin stack-through connector
  • PCI-104 120 pin stack-through connector
  • x1 lane PCI Express card edge allows installation in any slot width
  • Complies with PCI Express 1.1 electromechanical requirements
  • Measures 4.050” wide by 4.375” tall
  • ROHS compliant



Datasheet/Manual:

Connect Tech Inc. ADG013 datasheet in PDF format ADG016 Datasheet - PDF

 

Introduction

This convenient adapter board allows users to install either a PCIe/104 or a PCI/104-Express card into a standard PCI Express system slot. The adapter features both a PCIe/104 and a PCI-104 connector.

The passive PCI-104 connector has all critical PCI input signals tied off to safe levels to avoid damaging a dual-bus card, while at the same time provides extra mechanical stability for PCI/104-Express cards.

This adapter supports any x1 lane PCI/104-Express or PCIe/104 add-in card. Simply mount the add-in card to the adapter and install the adapter in a PCI Express slot. Most PCI/104-Express and PCIe/104 cards will require the connection of an IDE hard drive power cable to the P3 connector on the card. This cable provides the 5V rail to the add-in card.

Once everything is connected, you may begin using the add-in card just as you would any other PCI Express add-in card. No additional configuration is required.
 
 

Specification

General:

PCIe/104 and PCI/104-Express compatible
PCIe/104 156 pin stack-through connector
PCI-104 120 pin stack-through connector
x1 lane PCI Express card edge allows installation in any slot width
Complies with PCI Express 1.1 electromechanical requirements
Measures 4.050” wide by 4.375” tall
RoHS compliant

Temperature:

Operating Temperature: -40º C to 85º C (-40º F to 185º F)
Storage Temperature: -40º C to 125º C (-40º F to 257º F)

Humidity:

95% non-condensing

Software Compatibility:

Operating system independent

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

ADG016 PCI Express to PCI/104-Express Adapter

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.

Accessories:

N/A

Order Online!

 

ORDER ONLINE - some models from this product range are available to order on our online webshop.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.