Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Tri-M IO104-60IN - Optoisolated 60 Input I/O PC/104 Module

60 Optoisolated Digital Inputs, 3V to 24V AC or DC Input

Introduction

The IO104-60IN board is a a simple PC104 opto isolated input card featuring 60 inputs.

The inputs are accessed through I/O memory reads. The 60 inputs are grouped as seven sets of eight inputs, and one set of four inputs. Each group of
inputs is accessed through an I/O memory address, which is an offset from the base decode address.

Advantages

  • Input Range: 3V to 24V AC or DC input
  • Inputs on standard 0.1" pitch 40 pin headers
  • I/O access through I/O mapped
  • Multiple IO104-60IN boards can be stacked
  • PC/104 complaint, 3.75"W x 3.55"L

Specification

Digital I/O/Counter/Timers

I/Os60 optoisolated inputs
Inputs3V to 24V AC or DC input
IsolationAll inputs are optoisolated
Connectors(s)Inputs on standard 0.1" pitch 40 pin headers
OtherMultiple IO104-60IN boards can be stacked

General

ExpansionStandard 16 bit PC/104 interface
ElectricalPower Input: +5VDC +/-5%
Consumption: 100mA typical all outputs open
MechanicalDimensions: 96mm x 90mm
Conformal CoatingOn request
TemperatureTemperature range (operation): -40ºC to +85ºC (-40ºF to +185ºF)
Temperature range (storage): -40ºC to +85ºC (-40ºF to +185ºF)
Humidity0-90% non-condensing
Weight2.27 oz / 64 grams
MTBF1,714,901 hours
Warranty1 Year
RoHSCompliant

Ordering Details

BoardIO104-60IN-PBF PC/104, 60 Optoisolated inputs, (-40 to +85°C)
AccessoriesOptions:

-CH Add suffix for Humiseal conformal coating and epoxy (factory installed)
-CS Add suffix for Silicon conformal coating and epoxy (factory installed)
-CU Add suffix for Urethane conformal coating and epoxy (factory installed)
Order Online Tri-M IO104-60IN - Order Online