Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Diamond Point International

Em104P-PCM

PC/104+ PCMCIA Card Drive

Supports Type I/II/III PCMCIA cards, Single Socket
 
Em104P-PCM
  
  • One slot PCMCIA card bus module
  • Support Type I/II/III PCMCIA cards
  • 32-bit data bus
  • 1 or 2 Cardbus slot(s)



Datasheet/Manual:

Em104P-PCM datasheet in PDF format Datasheet in PDF format
Em104P-PCM manual in PDF format Manual in PDF format
 

Introduction

The Em104P-PCM models consist of a PC-104 plus (16/32 bit) interface module with one or two built-in PCMCIA card slots. The PC-104 plus interface module can be stacked with other PC/104 modules, mounted on a custom carrier board or stacked directly on a CPU card. One or two PCMCIA slots are built into the interface board. The Em104P-PCM is ideal for user who require one/two PCMCIA interface slots where easy accessibility to the PCMCIA slots is not required. The PCMCIA slots on the Em104P-PCM provides full support for all Type I, Type II, and Type III PCMCIA memory, I/O and ATA hard disk cards.
 
 

Specification
Support:

Comply with PCMCIA v. 2.1 and JEIDA 4.2
16-bit legacy mode support
PCI way legacy mode support
Mix and match 5V/3.3V PC card, 16/32 cards, 3.3V CardBus Cards
Support hot-swap function
Board has jumpers to select REQ/GNT/INT lines

Controller:

Uses Texas Instruments TI 1420 Controller

Support:

Support Windows 98/Me/2000/XP with Driver
Support Linux without Driver
Voltage:

3.3V/5V Typical
Environment:

Operation Temperature: -20°C to 70°C
Storage Temperature : -30°C to 85°C
Relative Humidity : Max 90%
Dimensions:

96mm(L) x 90mm(W) x 15mm(H)
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

Em104P-PCM/1 PC/104-Plus single port PCMCIA module
Em104P-PCM/2 PC/104-Plus dual port PCMCIA module 2 port PCMCIA module

Units come with manual and drivers
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.