Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Tri-M Technologies

Tri-M Technologies, Inc. HE104+DX

High Efficiency 108W Watt PC/104+ Power Supply

Extended Temperature Operation As Standard

 
Tri-M Technologies, Inc. HE104+DX
  
  • 108 Watt power supply
  • 6V to 40V DC input range
  • +3.3V, +5V, 12V, -12V
  • PC/104 compliant
  • PC/104+ bus
  • High efficiency (up to 90%)
  • -40°C to 85°C operation



Datasheet/Manual:

Tri-M Technologies, Inc. HE104+DX datasheet in PDF format HE104+DX Datasheet - PDF
Tri-M Technologies, Inc. HE104+DX manual in PDF format HE104+DX Manual - PDF
 

Introduction

This rugged, extended-temperature DC/DC power supply is designed specifically for mobile PC/104 computing applications. It consists of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, heat sink, input and output connectors, power-good indicator 16-bit PC/104 (ISA) and 32-bit PC/104+ (PCI) bus header. Simply stack your CPU and other cards on top or below the power supply module to provide power to your PC/104 system.

The HE-104+ DX provides increased output power of 108W for heavy-duty applications and higher efficiency (up to 99%) for cooler operation. Increased input range of 6 - 40VDC and extended temperature operation increase this module's value and utility. The unit provides +5V, 12V, -12V as well as 3.3V (for those power hungry PC/104+ cards!!!).

Why choose a Tri-M power supply?

Tri-M power supply units use the highest quality components, which is why they are capable of operating as standard from -40 to +85°C. The heavier components are held to the board by straps so that in extreme heavy vibration environments, the components won't move (which in inferior products would eventually cause joint failures where components are continuously moving).
 
 

Specification

Input voltage:

6 to 40V DC

Output power:

5V output 15A
12V output 3A
3.3V output 10A
-12V output 0.5

Performance:

Load Regulation (5V output) <60mV
Line Regulation 40mV
Output temp. drift (5V output) <40mV
Switching Freq. 75kHz
Max. Input Transient 125V for 100msec
Output Ripple (5V output) <20m
Conducted Susceptibility (5V output) >57db
Efficiency (5V output) Up to 90%

Dimensions:

3.55"W. x 3.75"L. x 0.6"H. (including pass through pins)

Weight:

6.08 oz/172.37 grams

Board:

Fully PC/104 compliant
Has bothPC/104 (ISA) and PC/104+ (PCI) buses

Operating temperature:

-40 to +85°C (all boards)

Operating humidity:

5% to 95% noncondensing

MTBF:

55.3 years

ROHS Status:

This product is lead free/ROHS compliant.


Ordering Details:

Board:

HE104+DX-PBF +3.3V, +5V, +12V, -12V DC outputs, 108 Watt power supply (stackthrough connectors)

HE104+DX-S-NS-PBF +3.3V, +5V, +12V, -12V DC outputs with PC/104 stackthrough, non stackthrough PC104/plus bus
HE104+DX-NS-NS-PBF +3.3V, +5V, +12V, -12V DC outputs with non PC/104 stackthrough, non stackthrough PC104/plus bus

-PBF indicates rohs compliance

Options:
-CH Add suffix for Humiseal conformal coating and epoxy (factory installed)
-CS Add suffix for Silicon conformal coating and epoxy (factory installed)
-CU Add suffix for Urethane conformal coating and epoxy (factory installed)

Please note that boards are supplied with no cables, software or manuals.
If you require the free CD please ensure this is on your purchase order.

Accessories:

-AIRCRAFT Add suffix for conformal coating & epoxy **

** option is factory installed & configured, it can not be retrofitted into existing units

Order Online!

 

ORDER ONLINE - some models from this product range are available to order on our online webshop.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.