Kontron Cables

ADA-FLOPPY-2

Consists of Adapter-card & flat-foil cable 26 way, pitch 1mm
Length 300mm
To connect standard floppy drive to any MOPS PC/104 card

KAB-DSUB25-1

KAB-DSUB25-1 consists of 26 way 2.54mm pitch IDC to 25 way female DSUB
Length 200mm
Brings out parallel port signals to a parallel port connector on any MOPS PC/104 card.

KAB-DSUB9-2

KAB-DSUB9-2 consists of 10 way 2.54mm pitch IDC to 9 way male DSUB
Length 200mm
Brings out serial port signals to a 9 way serial port connector on any MOPS PC/104 card.

KAB-FLOPPY/MOPS-1

Consists of flat-foil cable 26 pos., length 300mm, pitch 1mm (part used in ADA-Floppy-2)
Replacement cable for ADA-Floppy-2 part

KAB-IDE-25

Consists of 40 way 2.54mm pitch to 44 way 2mm pitch IDE cable (cable pins 41-44 are not used)
Length 180mm
Used for connecting 40 pin 3.5" IDE devices to 44 pin 2.5" IDE interface on any MOPS PC/104 card

KAB-IDE-2MM

Consists of 44 way 2mm pitch to 44 way 2mm pitch IDE cable
Length 150mm
Used for connecting 44pin 2.5" IDE devices to 44pin 2.5" IDE interface on any MOPS PC/104 card

KAB-KB-1

Consists of 10 way 2.54mm pitch to AT style 5 pin connector cable
Length 150mm
Allows connection of standard AT style keyboard to any MOPS PC/104 card

KAB-MOPS-ETN1

Consists of 8 way 2mm pitch to standard RJ-45 connector cable
Length 190mm
Allows connection of Ethernet network to Ethernet header on MOPS PC/104 card

KAB-VGA-2

Consists of 6 way 1.25mm pitch to 15 way female DSUB connector cable
Length 150mm
Allows CRT monitor to be attached to VGA header on MOPS PC/104 card

KAB-USB-1

Consists of 4 way 1.25mm pitch to 4 way female USB connector
Length 150mm
Allows USB devices with type A connector to be attached to USB on PC/104 MOPS card.

KAB-KB-PS2

Consists of 10 way 2.54mm pitch to PS/2 style 6 pin connector cable
Length 150mm
Allows connection of standard PS/2 style keyboard to any MOPS PC/104 card

KAB-DSUB9-3

Consists of 10 way 1.25mm pitch to 9 way male DSUB
Length 150mm
Brings out COM3/4 serial port signals to a 9 way serial port connector on MOPS PC/104 card.

KAB-MOUSE-PS2

Consists of 4 way 1.25mm pitch to PS/2 style 6 pin connector cable
Length 150mm
Allows connection of standard PS/2 style mouse to some MOPS PC/104 cards

KAB-CAN-1

Consists of 4 way 1.25mm pitch to 9 way male DSUB connector cable
Length 150mm
Allows connection of standard PS/2 style mouse to some MOPS PC/104 cards

Cable compatability
x - compatible & board takes 1 cable
2x - compatible & board takes 2 cables

96002-0000-00-1 KAB-SBC-SET1

Contains one of each of the following cables ( also available seperately unless indicated)

96060-0000-00-0 Cable KAB-KB-PS2 (PS/2 keyboard cable)
96062-0000-00-0 Cable KAB-MOUSE-PS2 (PS/2 mouse cable)
96015-0000-00-0 Cable KAB-DSUB25-1 (parallel cable)
96017-0000-00-0 Cable KAB-DSUB9-2 (serial cable)
96061-0000-00-0 Cable KAB-DSUB9-3 (serial cable)
96001-0000-00-0 Cable ADA-FLOPPY-2 (floppy cable)
96021-0000-00-0 Cable KAB-IDE-2MM (44 to 44 way IDE cable)
96022-0000-00-0 Cable KAB-IDE-1 IDE cable for 40 pin 2.54mm 3.5" harddisk
96054-0000-00-0 Cable KAB-USB-1 (USB cable)
96053-0000-00-0 Cable KAB-VGA-2 (VGA cable)
96048-0000-00-0 Cable KAB-ETN1 (Ethernet cable)
96072-0000-00-0 KAB-ATX-20TO10 (EPIC power cable for ATX power supplies)
96063-0000-00-0 KAB-SOUND-CMP Sound cable for coolmonster
N/A PS/2 splitter cable*
N/A 34 pin 2.54mm pitch floppy cable*
* these cables are only available as part of starter kit

These cables are available separarely (i.e. are not part of cable kit)

96020-0000-00-0 Cable IDE-25 (44 to 40 way IDE cable)
96019-0000-00-0 FLOPPY-MOPS-1 (replacement flat foil cable for ADA-FLOPPY-2)
96065-0000-00-0 KAB-CAN-1

N/A

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.