Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Tri-M DA104 - PC/104 Hard Drive and Compact Flash Adapters

Mounts 2.5" IDE Hard Drive, CompactFlash, or Flash Disk onto a PC/104 Stack

Tri-M DA104 - PC/104 Hard Drive and Compact Flash Adapters
Key Features
PC/104 HDD/CF mounting board
2.5" HDD/SDD mounting or
Compact Flash mounting
Pass through PC/104 possible
Standard 40 pin IDE header to host
-40°C to +85°C temperature operation

Introduction

The DA104 provides a convenient means of integrating a 2.5" IDE hard drive, M-Systems CompactFlash, or M-Systems IDE2000 Flash Disk onto a PC/104 "stack". Connection of the drive to the host CPU IDE port is supported by a standard 40 pins ribbon cable. The 5VDC power for the dirves is supplied either though the PC/104 bus, or 2 positions screw terminal. For additional memory, a second 2.5" hard drive or IDE2000 Flash Disk can be mounted to the underside of the module.

Advantages

  • Connect to CPU with standard IDE cable
  • 5V supplied via PC/104 or screw terminal
  • PC/104 compliant
  • ROHS compliant

Specification

Interface

FeaturesMounts a 2.5" notebook hard drive directly onto a PC/104 stack
40 pin 2.5" pitch connector (standard IDE)
Powered via screw terminal or PC/104 bus

General

ExpansionStandard 16 bit PC/104 interface (pass-through for ISA signals)
IDE device can be powered via bus
Mechanical3.550” x 3.775” (90mm x 96mm), standard PC/104 footprint
TemperatureTemperature range (operation): -40 to +85C
Temperature range (storage): -55 to +85C
Humidity95% non-condensing
Weight1.73oz/ 49.03g (excluding IDE drive)
Warranty1 Year
RoHSCompliant

Ordering Details

BoardDA104-CFD Supports Compact Flash
DA104-HD Supports 2.5" IDE hard drive
AccessoriesN/A