Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

DSC Jupiter-MM-5000 - Up to 218W Rugged PC104-Plus Power Supply

5V Output Standard, 3.3V & 12V Optional, -40 to +85 Operation

DSC Jupiter-MM-5000 - Up to 218W Rugged PC104-Plus Power Supply
Key Features
218W PC/104-Plus DC/DC Power Supply
Up to 218W total output power at 25C
5V output as standard, 3.3V, 12V options
PC/104 sized - 96 x 90mm
+7 to +34VDC DC input range
Optional system controller
-40 to +85°C temperature operation

Introduction

Jupiter-MM-5000 high-efficiency, high-precision 218W power supplies consist of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, integrated thermal solution, detachable screw terminal block I/O connections, and PC/104 bus connectors. The wide input voltage range of 7 to 34VDC is compatible with industry standard 12V, 24V, and 28V inputs.

On-board intelligence provides an unsurpassed level of control, monitoring and safety. All features are accessible and configurable via benchtop application software plus a programming library for real-time control.

The Jupiter-MM-5000 uses a state-of-the-art design with the latest generation high efficiency components. It delivers efficiency as high as 95 percent, reducing input power requirements as well as heat generation.

Jupiter-MM-5000 was engineered for rugged applications such as automotive or on-vehicle. Extended temperature operation of -40°C to +85°C is tested and guaranteed. Low-profile, surface mount components reduce susceptibility to shock and vibration. Both a low profile heat sink and heat spreader cooling options are available. I/O connections are made with locking screw terminal blocks for the highest degree of ruggedness.

Advanced System Controller

The full featured Jupiter-MM-5312 models include a system controller that offers advanced configuration, control, and monitoring features. The system controller is accessed via a USB port and is accompanied by benchtop configuration software as well as an application library for in-application real-time control.

  • Individual supply on/off control for +12V, +5V, +5V standby, +3.3V, and +3.3V standby outputs 
  • Individual supply output voltage / current monitoring 
  • Output voltage sequencing and slew rate control 
  • Output voltage adjustment 
  • Input voltage monitoring 
  • Fault handling based on programmable limits with interrupt notification, including supply shutdown in case of overload or other programmed conditions 
  • Hiccup mode for auto-restart when fault conditions are removed 
  • Min / max voltage and temperature logging 
  • Secondary input cutover voltage selection

Available Models

  • JMM-5312-APK Jupiter-MM-5312 218 Watt DC/DC power supply, +5V/+12V/+3.3V/standby voltages, advanced system controller, PC/104-Plus, heat sink
  • JMM-5312-AK Jupiter-MM-5312 218 Watt DC/DC power supply, +5V/+12V/+3.3V/standby voltages, advanced system controller, PC/104, heat sink
  • JMM-5312-APH Jupiter-MM-5312 218 Watt DC/DC power supply, +5V/+12V/+3.3V/standby voltages, advanced system controller, PC/104-Plus, heat spreader
  • JMM-5312-AH Jupiter-MM-5312 218 Watt DC/DC power supply, +5V/+12V/+3.3V/standby voltages, advanced system controller, PC/104, heat spreader
  • JMM-5012-APK Jupiter-MM-5012 196 Watt DC/DC power supply, +5V/+12V, PC/104-Plus, heat sink
  • JMM-5012-AK Jupiter-MM-5012 196 Watt DC/DC power supply, +5V/+12V, PC/104, heat sink
  • JMM-5012-APH Jupiter-MM-5012 196 Watt DC/DC power supply, +5V/+12V, PC/104-Plus, heat spreader
  • JMM-5012-AH Jupiter-MM-5012 196 Watt DC/DC power supply, +5V/+12V, PC/104, heat spreader
  • JMM-5000-APK Jupiter-MM-5000 100 Watt DC/DC power supply, +5V, PC/104-Plus, heat sink, extended temperature 
  • JMM-5000-AK Jupiter-MM-5000 100 Watt DC/DC power supply, +5V, PC/104, heat sink, extended temperature
  • JMM-5000-APH Jupiter-MM-5000 100 Watt DC/DC power supply, +5V, PC/104-Plus, heat spreader 
  • JMM-5000-AH Jupiter-MM-5000 100 Watt DC/DC power supply, +5V, PC/104, heat spreader

Customization Options

Several customization and minimum order quantity (MOQ) options are available for the Jupiter-MM-5000 power supply family.

  • Add 3.3V at 5A output
  • Add dual input power connectors with auto-cutover

I/O Connectivity

Jupiter-MM-5000 has six I/O connectors, including up to 4 detachable, locking screw terminal blocks with 14AWG wiring compatibility. The main power input is on a 4-position terminal block featuring dual input conductors for increased current capacity. Two terminal blocks supply the output power, one for +5V and the other for +12V and +3.3V. All output voltages from the supply are also fed to the designated power pins on the PC/104 and PC/104-Plus connectors.

Cooling Options

Diamond Systems recommends that JMM-5000 power supplies with heat sinks be used only in applications with power dissipation of 100W or less. The heat spreader cooling thermal option can be used for all output loads.

Specification

Power Supply

InputInput voltage: 7 - 34VDC
Input ripple: <100mV RMS
Transient cutoff: 31V nominal
Input protection: Over / under voltage, reverse polarity, surges, transients, reflected noise
Output(s)+5V at 20A maximum
+12V at 8A maximum
+3.3V at 5A maximum
+5V standby at 1A maximum
+3.3V standby at 0.1A maximum

Output protection: Current limit and short circuit protection

Load regulation:
• ±0.8%, Vmin to Vmax, 0-100% load on all outputs, -40°C to +85°C
• 0.35% maximum output voltage droop at 5V output, 0-20A load, VIN = 12V, TA = 25°C

Output ripple
• 44mV peak-to-peak maximum
• 12mV peak-to-peak at 5V output, 0-20A load, VIN = 12V, TA = 25°C

Transient load response: +/-72mV at 5V output, 25-75% load step, 2.5A/usec ramp rate, VIN = 24V, TA = 25°C
Temperature stability: +/-0.5% at 5V output, 10A load, VIN = 24V, TA = -40°C to 85°C
Efficiency92-94% at 5V output, 0-20A load, VIN = 12V, TA = 25C
OtherOn / off: Remote and programmable on/off

General

ExpansionDepending on version (heat-spreader version prohibits stacking upwards):
• Standard 16 bit PC/104 interface (stack through headers are installed)
• Standard 32 bit PCI-104 interface (stack through headers are installed)
Electrical7 - 32VDC - see above for more details
MechanicalDimensions: 90mm x 96mm (3.55" x 3.775"), standard PC/104, not including screw terminals
Maximum height: 0.435" (11mm) above PCB top surface
Conformal CoatingOn request
SoftwareN/A
TemperatureTemperature range (operation): -40 to +85°C
Temperature range (storage): -40 to +85°C
Humidity5% to 95% non-condensing
Weight6.3oz (179g) with heat sink
8.1oz (230g) with heat spreader
Warranty2 Years
RoHSCompliant

Ordering Details

BoardJMM-5312-APK
218 Watt DC/DC power supply, +5V/+12V/+3.3V/standby voltages, advanced system controller, PC/104-Plus, heat sink

JMM-5312-AK
218 Watt DC/DC power supply, +5V/+12V/+3.3V/standby voltages, advanced system controller, PC/104, heat sink

JMM-5312-APH
218 Watt DC/DC power supply, +5V/+12V/+3.3V/standby voltages, advanced system controller, PC/104-Plus, heat spreader

JMM-5312-AH
218 Watt DC/DC power supply, +5V/+12V/+3.3V/standby voltages, advanced system controller, PC/104, heat spreader

JMM-5012-APK
196 Watt Power Supply, +5V/+12V, PC/104-Plus, heat sink

JMM-5012-AK
196 Watt Power Supply, +5V/+12V, PC/104, heat sink

JMM-5012-APH
196 Watt Power Supply, +5V/+12V, PC/104-Plus, heat spreader

JMM-5012-AH
196 Watt Power Supply, +5V/+12V, PC/104, heat spreader

JMM-5000-APK
100 Watt Power Supply, +5V, PC/104-Plus, heat sink

JMM-5000-AK
100 Watt Power Supply, +5V, PC/104, heat sink

JMM-5000-APH
100 Watt Power Supply, +5V, PC/104-Plus, heat spreader

JMM-5000-AH
100 Watt Power Supply, +5V, PC/104, heat spreader
AccessoriesN/A